4.7 Article

Influence of dispersion of fibrillated cellulose on the reinforcement of coated papers

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Agricultural Engineering

Use of sugar beet cellulose nanofibers for paper coating

Shaimaa M. M. Fadel et al.

Summary: Cellulose nanofibers (CNFs) were isolated from sugar beet pulp using two different methods and compared in terms of their characteristics. The results showed that CNFs isolated from hydrothermal extraction exhibited better performance in film preparation, and significantly improved the mechanical properties and grease-proof properties of paper sheets after coating.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Article Biochemistry & Molecular Biology

Effect of cationization pretreatment on the properties of cationic Eucalyptus micro/nanofibrillated cellulose

Jorge F. S. Pedrosa et al.

Summary: This study evaluated the effects of cationization method and degree of substitution on the properties of cationic cellulose materials. Two-step cationization resulted in significant cellulose degradation and solubilization, while direct cationization produced longer fibers and a more cohesive gel-like material.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Article Biochemistry & Molecular Biology

Critical comparison of the properties of cellulose nanofibers produced from softwood and hardwood through enzymatic, chemical and mechanical processes

Jose Luis Sanchez-Salvador et al.

Summary: Current knowledge on the properties of cellulose nanofibers (CNFs) is fragmented. This study compares the rheological, compositional, and morphological features of CNFs produced from different types of wood and using various pretreatments, aiming to find the most relevant parameters for selecting the appropriate CNF for specific applications.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Article Biochemistry & Molecular Biology

Cellulose nanofibrils (CNFs) in uniform diameter: Capturing the impact of carboxyl group on dispersion and Re-dispersion of CNFs suspensions

Zhenqiang Zai et al.

Summary: This study investigates the dispersion and re-dispersion of cellulose nanofibrils (TOCNFS) with uniform diameter and different carboxyl group contents in various solvents. By regulating the carboxyl group content, the most uniform and stable dispersion and re-dispersion of TOCNFs can be achieved. This has important implications for the potential applications of nanofibrils in polymer matrix composites.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Article Chemistry, Multidisciplinary

Gel Point as Measurement of Dispersion Degree of Nano-Cellulose Suspensions and Its Application in Papermaking

Jose Luis Sanchez-Salvador et al.

Summary: This study proposes a method based on gel point to calculate the dispersion degree and aspect ratio of cellulose micro and nanofibrils in water suspensions. The results show that higher stirring speeds decrease the dispersion capability and cause network collapse, while intermediate stirring speeds result in better dispersion behavior and network structure. Higher dispersion of cellulose before adding to the pulp leads to higher mechanical properties.

NANOMATERIALS (2022)

Article Materials Science, Paper & Wood

Optimization of reagent consumption in TEMPO-mediated oxidation of Eucalyptus cellulose to obtain cellulose nanofibers

Hongyu Xu et al.

Summary: This study optimized TEMPO-mediated oxidation reactions to reduce costs while achieving efficient and sustainable production of CNFs. Through adjusting reaction conditions, the carboxyl groups were increased while reducing catalyst doses, resulting in highly fibrillated CNFs with lower environmental impact.

CELLULOSE (2022)

Article Chemistry, Multidisciplinary

Micro-/Nanofibrillated Cellulose-Based Coating Formulations: A Solution for Improving Paper Printing Quality

Mohit Sharma et al.

Summary: This study explores the use of micro-/nanofibrillated celluloses (M/NFCs) on the paper surface to enhance printing quality. Different pre-treatment methods were used to produce M/NFCs, and various components were added to the coating formulations. The presence of M/NFCs and increased cationic charge density improved the printing quality, while the addition of other components showed varying effects on paper whiteness and color properties.

NANOMATERIALS (2022)

Article Materials Science, Paper & Wood

Potentiometric back titration as a robust and simple method for specific surface area estimation of lignocellulosic fibers

Ferran Serra-Parareda et al.

Summary: This study proposes a methodology for estimating the specific surface area (SSA) of lignocellulosic pulp based on cationic demand, utilizing a commonly used cationic polyelectrolyte. The system assumes that quaternary ammonium groups are anchored through electrostatic and ion-dipole interactions, with the model validated through high correlation coefficients. The SSA values estimated from cationic demand were consistently lower than those from dye sorption, potentially providing a more helpful quantification of available surfaces in papermaking operations with low residence times.

CELLULOSE (2021)

Review Energy & Fuels

Recent Advances in Cellulose Nanofibers Preparation through Energy-Efficient Approaches: A Review

Seyed Rahman Djafari Petroudy et al.

Summary: Cellulose nanofibers (CNFs) and their applications have gained attention for their properties, but high production costs are a limiting factor. Research on energy-efficient methods is crucial for reducing costs and improving yields.

ENERGIES (2021)

Review Chemistry, Multidisciplinary

Rheological Aspects of Cellulose Nanomaterials: Governing Factors and Emerging Applications

Mei-Chun Li et al.

Summary: Cellulose nanomaterials, including nanofibrillated cellulose and cellulose nanocrystals, have unique properties such as sustainability, biodegradability, and biocompatibility, making them attractive for a wide range of applications. Their aqueous suspension rheology allows for the creation of viscous suspensions with shear-thinning behavior. These properties make cellulose nanomaterials valuable rheological modifiers in fluid-based applications.

ADVANCED MATERIALS (2021)

Article Materials Science, Paper & Wood

Simplification of gel point characterization of cellulose nano and microfiber suspensions

Jose Luis Sanchez-Salvador et al.

Summary: A new methodology for estimating the gel point of nanocellulose is introduced in this study, which reduces the number of experiments needed and shows low error rates in validation.

CELLULOSE (2021)

Article Engineering, Environmental

Biopolymers and composites: Properties, characterization and their applications in food, medical and pharmaceutical industries

Gowthama Prabu Udayakumar et al.

Summary: Biopolymers, derived from natural sources, offer biocompatibility and biodegradability, making them valuable in various applications such as edible films, emulsions, packaging materials, drug transport, medical implants, wound healing, and dressing materials in the food and pharmaceutical industries. This review focuses on the physical, thermal, mechanical, and optical properties of biopolymers and their composites, along with different characterization techniques, to meet future demands and enhance research in the field.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Review Materials Science, Paper & Wood

Cellulose nanomaterials: new generation materials for solving global issues

T. C. Mokhena et al.

CELLULOSE (2020)

Review Materials Science, Paper & Wood

Trends in the production of cellulose nanofibers from non-wood sources

Jordan Pennells et al.

CELLULOSE (2020)

Article Multidisciplinary Sciences

Comparison Of Mechanical And Chemical Nanocellulose As Additives To Reinforce Recycled Cardboard

Jose Luis Sanchez-Salvador et al.

SCIENTIFIC REPORTS (2020)

Article Polymer Science

Cellulose Nanofibers from a Dutch Elm Disease-Resistant Ulmus minor Clone

Laura Jimenez-Lopez et al.

POLYMERS (2020)

Review Multidisciplinary Sciences

Development of completely dispersed cellulose nanofibers

Akira Isogai

PROCEEDINGS OF THE JAPAN ACADEMY SERIES B-PHYSICAL AND BIOLOGICAL SCIENCES (2018)

Article Chemistry, Multidisciplinary

Decoupling Arrest Origins in Hydrogels of Cellulose Nanofibrils

Hua-Neng Xu et al.

ACS OMEGA (2018)

Article Materials Science, Paper & Wood

Chemical Recovery in TEMPO Oxidation

Lauri Kuutti et al.

BioResources (2016)

Article Chemistry, Applied

Nanofibrillated cellulose (CNF) from eucalyptus sawdust as a dry strength agent of unrefined eucalyptus handsheets

Maria Evangelina Vallejos et al.

CARBOHYDRATE POLYMERS (2016)

Article Chemistry, Multidisciplinary

Homogeneous Dispersion of Cellulose Nanofibers in Waterborne Acrylic Coatings with Improved Properties and Unreduced Transparency

Yao Tan et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Review Polymer Science

Recent advances in nanocellulose for biomedical applications

Mehdi Jorfi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

Article Biochemistry & Molecular Biology

Relationship between Length and Degree of Polymerization of TEMPO-Oxidized Cellulose Nanofibrils

Ryuji Shinoda et al.

BIOMACROMOLECULES (2012)

Article Chemistry, Applied

Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization

Arup Mandal et al.

CARBOHYDRATE POLYMERS (2011)

Article Materials Science, Paper & Wood

Quality loss of refined softwood bleached kraft pulp during agitated storage

Ulla-Britt Mohlin

NORDIC PULP & PAPER RESEARCH JOURNAL (2010)

Article Biochemistry & Molecular Biology

Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose

Tsuguyuki Saito et al.

BIOMACROMOLECULES (2007)

Article Materials Science, Paper & Wood

TEMPO-mediated surface oxidation of cellulose whiskers

Youssef Habibi et al.

CELLULOSE (2006)