☆ 4.6 Article

Effect of T6I4 and T616 on the machinability of 7075 aluminum alloy and tool wear mechanism

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Effect of aging plus cryogenic treatment on the machinability of 7075 aluminum alloy

Ping Zhang et al.

Summary: This study investigates the effect of aging plus cryogenic treatment on the machinability of 7075 aluminum alloy in high speed cutting. The results show that cryogenic treatment reduces the cutting force and leads to smaller grain size and more precipitates in the aluminum matrix. After cryogenic treatment, the alloy precipitates are denser and discontinuous, and the stacking fault on the machined surface is greatly improved.

VACUUM (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of heat treatment process on the micro machinability of 7075 aluminum alloy

Ping Zhang et al.

Summary: This study investigates the effect of heat treatment process on the micro machinability of 7075 aluminum alloy. Different heat treatment processes are found to have varying effects on the cutting force, surface roughness, surface quality, and residual stress of the alloy. Changes in cutting parameters also influence the machining performance of the alloy differently under different heat treatment processes.

VACUUM (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Three-dimensional finite element analysis for temperature filed of composite materials during the cure

Zhangxin Guo et al.

Summary: The finite element method is used to simulate the curing of composite structures with arbitrary geometry. The simulated results match experimental results well, indicating the reliability of the finite element analysis models. Compared to one- and two-dimensional finite element analysis, this study allows for the calculation of temperature and degree of cure at any point within composite structures.

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Water jet impact damage mechanism and dynamic penetration energy absorption of 2A12 aluminum alloy

Ping Zhang et al.

Summary: This study investigates the impact of waterjet cavitation on the dynamic penetration energy absorption of 2A12 aluminum alloy. Experimental and simulation results show that waterjet cavitation can enhance the residual compressive stress and improve the surface quality of the target. The combination of small jet angle with large jet pressure or large jet angle with medium jet pressure delivers the best strengthening effect.

VACUUM (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quench Sensitivity of 7475 Aluminum Alloy Using End-Quenching Technique and TTP Diagrams

Lianghua Lin et al.

Summary: The sensitivity of 7475 aluminum alloy to cooling rate was investigated, revealing a critical temperature range of 300-350 degrees Celsius and a wide precipitate-free zone at cooling rates lower than 12.5 degrees Celsius per second. At lower cooling rates, eta phases form, suppressing the formation of strengthening precipitates.

JOM (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface integrity and tool wear mechanism of 7050-T7451 aluminum alloy under dry cutting

Zhang Ping et al.

Summary: The cutting parameters significantly affect the surface roughness, work hardening, and residual stress of AA7050-T7451 aluminum alloy. Higher cutting speeds and lower feed rates can improve surface roughness, while cutting depth has little effect on surface roughness. Residual stress is closely related to changing cutting parameters.

VACUUM (2021)

添加到收藏夹

Article Engineering, Mechanical

Analysis on the tool wear behavior of 7050-T7451 aluminum alloy under ultrasonic elliptical vibration cutting

Ping Zhang et al.

Summary: The machinability and tool wear behavior of 7050-T7451 aluminum alloy were compared under different cutting parameters and vibration frequencies in conventional cutting (CC) and ultrasonic elliptical vibration cutting (UEVC) processes. Results showed that UEVC required about three fifths the cutting force of CC under the same parameters, with higher cutting surface quality. The cutting surface of UEVC exhibited precipitate-free zones, while tool wear in CC was typically tipping, spalling, adhesive, or oxidative wear, while in UEVC it mainly consisted of impact-induced mechanical wear such as abrasive, mild oxidative, and mild adhesive wear.

WEAR (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Study on the effect of cutting parameters on bamboo surface quality using response surface methodology

Yanhe Liu et al.

Summary: This study optimized diamond cutting tools for bamboo cutting using response surface methodology and found that feed speed has a significant impact on surface roughness. The best cutting combination can achieve better surface quality.

MEASUREMENT (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion resistance of aluminum fluoride modified 6061 aluminum alloy

Wei Xiao et al.

Summary: The oxide film on the surface of aluminum alloy is vulnerable to damage in marine and lake environments, leading to corrosion. This study used PVDF as a surface treatment material and deposited a protective layer of aluminum fluoride on the aluminum alloy surface, improving its corrosion resistance.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Milling dynamic model based on rotatory Euler-Bernoulli beam model under distributed load

Qi Yao et al.

APPLIED MATHEMATICAL MODELLING (2020)

添加到收藏夹

Article Automation & Control Systems

Effect of cutting and vibration parameters on the cutting performance of 7075-T651 aluminum alloy by ultrasonic vibration

Heng Luo et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Forming and Warm Die Quenching Process for AA7075 Aluminum Alloy and Its Application

Zhiqiang Zhang et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study on the dynamic mechanical behavior and microtexture of 6082 aluminum alloy under different direction

Ping Zhang et al.

VACUUM (2020)

添加到收藏夹

Article Engineering, Manufacturing

Experimental and Numerical Investigation on Strengthening Behavior of 7075 Aluminum Alloy Sheets in Hot Forming-Quenching Integrated Process

Shichao Chen et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Article Automation & Control Systems

A prediction model of milling force for aviation 7050 aluminum alloy based on improved RBF neural network

Yaonan Dai et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Application of Plasma Sprayed Cu Intermediate Layers in the Soldering Process of Graphite Composite to 6060 Aluminum Alloy

Tomasz Wojdat et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Marine

Weld Residual Stress Measurement Using Portable XRD Equipment in a Shipyard Environment

Yu-Ping Yang et al.

JOURNAL OF SHIP PRODUCTION AND DESIGN (2019)

添加到收藏夹

Article Engineering, Industrial

On modelling of cutting force and temperature in bone milling

Zhirong Liao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Effects of WC grain size and Co content on microscale wear behavior of micro end mills in aluminum alloy 7075 machining

Peng Gao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Application of hot forming cold die quenching for facilitating equal channel angular pressing of AA2024 aluminum alloy

A. Baghbani Barenji et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Engineering, Mechanical

Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy

A. M. B. S. Antunes et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

添加到收藏夹

Article Automation & Control Systems

Investigation of surface properties in turn milling of particle-reinforced aluminium matrix composites using MCD-tipped tools

Benjamin Clauss et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of vibration in cutting on tool flank wear: Fundamental study by conducting a cutting experiment with forced vibration in the depth-of-cut direction

Ryosuke Kataoka et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Scandium Addition and T7 Heat Treatment on Thermal Stability and Corrosion Properties of A201 Alloy

Chih-Ting Wu

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study on chip and microstructure of 7055 aluminum alloy's 3D HSC based on FEM and experiment

Ping Zhang et al.

VACUUM (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of a Minor Sr Modifier on the Microstructures and Mechanical Properties of 7075 T6 Al Alloys

Shaoming Ma et al.

METALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cutting performance and wear mechanisms of Sialon ceramic cutting tools at high speed dry turning of gray cast iron

Guizhao Tu et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dry Machining Aeronautical Aluminum Alloy AA2024-T351: Analysis of Cutting Forces, Chip Segmentation and Built-Up Edge Formation

Badis Haddag et al.

METALS (2016)

添加到收藏夹

Article Engineering, Manufacturing

Application of local mechanical tensioning and laser processing to refine microstructure and modify residual stress state of a multi-pass 304L austenitic steels welds

Jibrin Sule et al.

JOURNAL OF MANUFACTURING PROCESSES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of retrogression and re-aging treatment on corrosion behaviour of an Al-Zn-Mg-Cu alloy

Yan-Ping Xiao et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Engineering, Manufacturing

Modified material constitutive models for serrated chip formation simulations and experimental validation in machining of titanium alloy Ti-6Al-4V

Mohammad Sima et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)

添加到收藏夹

Article Engineering, Mechanical

Monitoring of dry cutting and applications of cutting fluid

S. Tangjitsitcharoen

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2010)

添加到收藏夹

Article Mechanics

Three-dimensional cure simulation of composite structures by the finite element method

HC Park et al.

COMPOSITE STRUCTURES (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.