4.7 Article

The impact of inner air jet on fuel mixing mechanism and mass diffusion of single annular extruded nozzle at supersonic combustion chamber

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Comparative investigation on combustion characteristics of ADN-based liquid propellants in inert gas and oxidizing gas atmospheres with resistive ignition method

Hong -Meng Li et al.

Summary: An experimental investigation on the combustion characteristics of ADN-based liquid propellant droplets was conducted using the resistive ignition method. The study showed that the liquid propellant demonstrated feasibility for combustion in an inert gas atmosphere. Ignition energy played a crucial role during the ignition and combustion process, and the atmosphere had a significant influence on the burning duration and droplet diameter.
Article Electrochemistry

Minimum hydrogen consumption-based energy management strategy for hybrid fuel cell unmanned aerial vehicles using direction prediction optimal foraging algorithm

Rui Quan et al.

Summary: This paper proposes an optimization method based on OFA/DP algorithm for energy management in hybrid energy storage systems of fuel cell UAVs. Compared with rule-based and other optimized methods, the proposed method shows significant advantages in energy efficiency and hydrogen consumption.

FUEL CELLS (2023)

Article Engineering, Mechanical

Phased array guided wave propagation in curved plates

Qi Yuan et al.

Summary: Phased array guided wave has great potential for determining damage location and size in plate structures. This study investigates the behavior of phased array guided wave propagation in curved plates through experimental tests and numerical simulations, evaluating the effects of different radii and damage scenarios.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Article Engineering, Mechanical

Tribology and dynamic characteristics of textured journal-thrust coupled bearing considering thermal and pressure coupled effects

Jiahao Shi et al.

Summary: This study aims to establish a thermal elastohydrodynamic (TEHD) lubrication analysis model for textured journal-thrust coupled bearing in diesel engine, taking into consideration the thermal and pressure coupled effects in the lubrication process. The model considers the flow, pressure, and thermal continuity conditions between the journal and thrust parts. Experimental results from a specific testing equipment validated the correctness of the TEHD lubrication model. Parametric analyses were conducted to explore the influences of thermal and pressure coupled effects on lubrication performances and dynamic characteristics.

TRIBOLOGY INTERNATIONAL (2023)

Article Automation & Control Systems

Multi-scale integrated deep self-attention network for predicting remaining useful life of aero-engine

Ke Zhao et al.

Summary: In this paper, a multi-scale integrated deep self-attention network (MSIDSN) is proposed to accurately predict the remaining useful life (RUL) of aero-engine based on multi-sensory data. The network selectively extracts features at different scales and fuses them to output the RUL prediction. Experimental results demonstrate the superiority of MSIDSN.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2023)

Article Thermodynamics

Concept of rapid and controllable combustion for high power-density diesel engines

Long Liu et al.

Summary: In recent years, there has been significant interest in reducing global carbon emissions, leading to stricter policies and regulations. For high power-density marine diesel engines, optimizing fuel consumption is difficult due to the large injection mass and little intake swirl. This article proposes a concept of rapid and controllable combustion to address this issue, which involves optimizing the combustion process based on the Sabathe-Miller cycle and determining controllable parameters through the evolution of in-cylinder spray.

ENERGY CONVERSION AND MANAGEMENT (2023)

Article Engineering, Aerospace

Effects of supersonic nozzle guide vanes on the performance and flow structures of a rotating detonation combustor

Dawen Shen et al.

Summary: The integration of nozzle guide vanes into the rotating detonation combustor enhances the detonation strength and pressure gain capability, resulting in greater thrust potential for the turbine engine. A new shock structure is identified, which prevents the typical unstarting issue for turbines.

ACTA ASTRONAUTICA (2022)

Article Engineering, Mechanical

Study on the effect of raindrops on the dynamic stall of a NACA-0012 airfoil

Armin Sheidani et al.

Summary: In this study, the pure effect of raindrops on dynamic stall of a pitching airfoil has been investigated. It was found that raindrops have negative effects on the lift coefficient of the pitching airfoil, and the presence of raindrops leads to the advancement of some aerodynamic phenomena.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

Article Mechanics

Investigation of counter-rotating shock wave and wave direction control of hollow rotating detonation engine with Laval nozzle

Guangyao Rong et al.

Summary: This study investigates the counter-rotating shock wave and wave direction control in a hollow rotating detonation combustor with a Laval nozzle. The phenomenon and spatial distribution of the counter-rotating shock wave in the combustor are revealed using the in-house solver BYRFoam developed on the OpenFOAM platform. The study proposes a method of controlling the wave direction by reducing the inlet total pressure, which in turn controls the intensity of the counter-rotating shock wave. The study also investigates the mechanism of wave direction control and finds a positive feedback interaction between the counter-rotating shock wave and the fresh gas, leading to the evolution of reverse detonation waves.

PHYSICS OF FLUIDS (2022)

Article Multidisciplinary Sciences

Splitting of droplet with different sizes inside a symmetric T-junction microchannel using an electric field

Keivan Fallah et al.

Summary: In this study, droplets dynamics under an asymmetric electric field in a T-junction were numerically investigated, and two novel droplet patterns were observed. It was concluded that using an electric field allows for precise control over droplet size and splitting ratio.

SCIENTIFIC REPORTS (2022)

Article Engineering, Electrical & Electronic

Research on Recognition Method of Electrical Components Based on FEYOLOv4-tiny

Jilong Gao et al.

Summary: In this study, a novel electrical component recognition method based on Feature Enhanced YOLOv4-tiny is proposed, which enhances the feature extraction capability using enhancement module and utilizes attention modules to capture informative and discriminatory features. Experimental results show that the proposed method outperforms other lightweight networks in terms of detection accuracy with almost the same real-time performance, especially for small targets with complex background.

JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (2022)

Article Green & Sustainable Science & Technology

Exploration of environmentally friendly marine power technology-ammonia/diesel stratified injection

Long Liu et al.

Summary: Ammonia is a promising carbon-free alternative fuel for reducing carbon emissions in marine engines. The study found that ammonia-diesel stratified injection technology can significantly reduce CO2 and NOx emissions, improve energy ratio, and meet future low-carbon emission regulations without the need for after-treatment. Increasing injection pressure and reducing pilot fuel proportion is the optimal solution for achieving high IMEP, low NOx, and carbon emissions.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Engineering, Mechanical

Self-feature-based point cloud registration method with a novel convolutional Siamese point net for optical measurement of blade profile

Luofeng Xie et al.

Summary: In this paper, a novel and general framework called convolutional Siamese point net (CSPN) is proposed for partial-to-partial point cloud registration. The network consists of feature extraction, matching matrix computation, and singular value decomposition (SVD), with a pyramidal architecture and novel attention mechanism to address registration challenges for measuring blade profiles.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Aerospace

Numerical investigation on mixing improvement mechanism of transverse injection based scramjet combustor

Gautam Choubey et al.

Summary: The research results indicate that the flame holding capacity of a hydrogen-fuelled supersonic combustor is better than an ethylene-fuelled combustor. The introduction of a shock generator can enhance the mixing of fuel with supersonic airflow.

ACTA ASTRONAUTICA (2021)

Article Computer Science, Interdisciplinary Applications

Injection of hydrogen sonic multi-jet on inclined surface at supersonic flow

Amin Hassanvand et al.

Summary: The study investigates the effects of multiple hydrogen jets on an inclined surface in supersonic airflow, finding that mixing performance improves at high jet pressure and with increasing angle of the exterior surface. The study also highlights the significant impact of power and slant of the separation shock on the size of the mixing zone.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2021)

Article Chemistry, Physical

Mixing efficiency of hydrogen multijet through backward-facing steps at supersonic flow

Chuan Sun et al.

Summary: Injecting hydrogen jets to enhance the fuel mixing efficiency of a scramjet engine, a recent study found that under specific conditions, high circulation value can be achieved to improve mixing efficiency.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Effect of hybrid coaxial air and hydrogen jets on fuel mixing at supersonic crossflow

Yuelei Zhang et al.

Summary: The research applies a computational method to examine the impacts of coaxial hybrid air and fuel jets on fuel mixing at supersonic cross-flow, revealing significant improvement in fuel penetration and mixing inside the combustion chamber. The study also confirms that the coaxial injector enhances the spiral feature of the fuel jet, promoting fuel mixing downstream and increasing circulation strength in far away from an injector.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Engineering, Aerospace

Influence of trapezoidal lobe strut on fuel mixing and combustion in supersonic combustion chamber

Yu Jiang et al.

Summary: This article investigates the fuel injection system in supersonic vehicles, focusing on the use of a trapezoidal strut injector to enhance fuel mixing. The strength of vortices is influenced by injector velocity and free stream conditions, with the results showing an 18% improvement in fuel mixing when using a trapezoidal strut injector.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

Review Physics, Multidisciplinary

Synchrotron-based infrared microspectroscopy under high pressure: An introduction

Lingping Kong et al.

Summary: The use of synchrotron sources and diamond anvil cells has greatly advanced high-pressure science. SIRMS offers high sensitivity and provides a good platform for high-pressure research on small amounts of materials.

MATTER AND RADIATION AT EXTREMES (2021)

Article Engineering, Aerospace

The influence of the wedge shock generator on the vortex structure within the trapezoidal cavity at supersonic flow

Zhixiong Li et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Aerospace

The influence of the sinusoidal shock generator on the mixing rate of multi hydrogen jets at supersonic flow

Yicheng Li et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Article Chemistry, Physical

Numerical simulation of mixing of hydrogen jet at supersonic cross flow in presence of upstream wavy wall

Tran Dinh Manh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Computational investigation of multi-cavity fuel injection on hydrogen mixing at supersonic combustion chamber

Zhixiong Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Computer Science, Interdisciplinary Applications

Computational study of the cavity flow over sharp nose cone in supersonic flow

F. Pish et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2020)

Article Engineering, Aerospace

Mixing enhancement of multi hydrogen jets through the cavity flameholder with extended pylon

Zhixiong Li et al.

ACTA ASTRONAUTICA (2020)

Article Engineering, Aerospace

Effect of inclined block on fuel mixing of multi hydrogen jets in scramjet engine

Zhixiong Li et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Article Multidisciplinary Sciences

Hyperpolarized Xe NMR signal advancement by metal-organic framework entrapment in solution

Qingbin Zeng et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Article Chemistry, Physical

Injection of multi hydrogen jets within cavity flameholder at supersonic flow

Amirhossein Edalatpour et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Effect of fuel jet arrangement on the mixing rate inside trapezoidal cavity flame holder at supersonic flow

Sunwen Du et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Engineering, Aerospace

The influence of upstream wavy surface on the mixing zone of the transverse hydrogen jet at supersonic free stream

M. Barzegar Gerdroodbary et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2019)

Article Chemistry, Physical

The optimization via response surface method for micro hydrogen gas actuator

Zhixiong Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Thermodynamics

Viscous equilibrium analysis of heat transfer on blunted cone at hypersonic flow

F. Pish et al.

CASE STUDIES IN THERMAL ENGINEERING (2019)

Article Engineering, Aerospace

The influence of micro air jets on mixing augmentation of fuel in cavity flameholder at supersonic flow

Keivan Fallah et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

Article Chemistry, Physical

Shape effect of cavity flameholder on mixing zone of hydrogen jet at supersonic flow

Rasoul Moradi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Thermodynamics

DROP FORMATION IN CROSS-JUNCTION MICRO-CHANNEL USING LATTICE BOLTZMANN METHOD

Keivan Fallah et al.

THERMAL SCIENCE (2018)

Article Engineering, Aerospace

Mixing augmentation of transverse hydrogen jet by injection of micro air jets in supersonic crossflow

A. Anazadehsayed et al.

ACTA ASTRONAUTICA (2017)

Article Engineering, Aerospace

Characteristics of transverse hydrogen jet in presence of multi air jets within scramjet combustor

M. Barzegar Gerdroodbary et al.

ACTA ASTRONAUTICA (2017)

Article Engineering, Mechanical

Numerical investigation of MHD water-based nanofluids flow in porous medium caused by shrinking permeable sheet

P. Valipour et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2016)

Article Nanoscience & Nanotechnology

Investigation on vibration of single-walled carbon nanotubes by variational iteration method

A. A. Ahmadi Asoor et al.

APPLIED NANOSCIENCE (2016)

Article Engineering, Aerospace

Supersonic Combustion and Flame Stabilization of Coflow Ethylene and Air with Splitter Plate

Liwei Zhang et al.

JOURNAL OF PROPULSION AND POWER (2015)

Article Thermodynamics

Heat transfer of swirling impinging jets ejected from Nozzles with twisted tapes utilizing CFD technique

Younes Amini et al.

CASE STUDIES IN THERMAL ENGINEERING (2015)

Article Engineering, Aerospace

Numerical Investigation of Transverse Jets Through Multiport Injector Arrays in Supersonic Crossflow

Adrian S. Pudsey et al.

JOURNAL OF PROPULSION AND POWER (2010)

Article Engineering, Aerospace

Transverse injection through diamond and circular ports into a Mach 5.0 freestream

Ravichandra Srinivasan et al.

AIAA JOURNAL (2008)