☆ 4.7 Article

Preparation of porous TiNi intermetallic compound and the corrosion behavior in NaCl solution

INTERMETALLICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Effect of sulphide concentration on corrosion behaviors of HVOF-sprayed WC-Cr3C2-Ni and WC-Ni coatings

Ziyu Wei et al.

Summary: In this study, WC-Cr3C2-Ni and WC-Ni coatings were applied to steel surfaces using HVOF spray. The corrosion behaviors of these coatings in 3.5 wt% NaCl solution with varying Na2S concentrations were investigated. Electrochemical tests were conducted to measure the corrosion resistances of the coatings, while SEM and XPS analysis were used to study their morphologies and corrosion products. It was found that the passivation of the coatings played a key role in their corrosion resistances, with sulphide concentration negatively affecting the integrity of passive films. The WC-Cr3C2-Ni coating exhibited better corrosion resistance due to its stable structure and higher tendency for repassivation.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Microstructure and properties of Cu-TiNi composites prepared by vacuum hot pressing

Xi Zhang et al.

Summary: Cu-TiNi composites with different TiNi volume percentages were prepared, and their microstructure, thermal and mechanical properties were analyzed. The results showed that diffusion of elements occurred at the interface and formed a diffusion layer. TiNi particles were uniformly distributed in the Cu matrix and had a well-bonded interface. The hardness and yield strength increased with the increase of TiNi volume percentage, while the thermal expansion coefficient showed an opposite trend.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ phase transformation and corrosion behavior of TiNi via LPBF

Gang Chen et al.

Summary: This study controls the composition of B2/B19' phases in NiTi components using LPBF, conducts electrochemical testing, and finds that the as-printed sample demonstrates better corrosion resistance, with a much stronger pitting corrosion resistance for the full B2 phase sample.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D microstructure and anti-oxidation behavior of porous CoAl intermetallic fabricated by rapid thermal explosion

Zhichao Shang et al.

Summary: In this study, high porosity and 3D microstructure CoAl material was prepared and the relationship between pore structure, mechanical properties and oxidation resistance was established using 3D-XRM. The oxidation corrosion test revealed different mass gain mechanisms at different growth stages.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

3D nanoporous Ni@NiO/metallic glass sandwich electrodes without corrosion cracks for flexible supercapacitor application

Xinhao Sun et al.

Summary: This research successfully fabricated sandwich uniform nanoporous Ni@NiO core@shell electrodes with enhanced flexibility and high electrochemical performance. Controlling the corrosion rates effectively eliminated corrosion cracks and significantly improved the flexibility of the electrodes. The assembled flexible all-solid-state supercapacitor (FAS) device showed great potential as a wearable energy storage device.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on corrosion behavior of the selective laser melted NiTi alloy with superior tensile property and shape memory effect

Ping Qiu et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Exploiting ultra-large linear elasticity over a wide temperature range in nanocrystalline NiTi alloy

Zhen Sun et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stability, structure, and suppression of the martensitic transition temperature by B19' compound twins in NiTi: ab initio and classical simulations

Luis Sandoval et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Chemistry, Physical

Synthesis of NiTi microtubes via the Kirkendall effect during interdiffusion of Ti-coated Ni wires

A. E. Paz y Puente et al.

INTERMETALLICS (2018)

添加到收藏夹

Review Chemistry, Physical

A Review of Selective Laser Melted NiTi Shape Memory Alloy

Zhong Xun Khoo et al.

MATERIALS (2018)

添加到收藏夹

Proceedings Paper Engineering, Biomedical

Three dimensional printing of stiffness-tuned, nitinol skeletal fixation hardware with an example of mandibular segmental defect repair

Narges Shayesteh Moghaddam et al.

SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of grain size on the rate-dependent thermomechanical responses of nanostructured superelastic NiTi

Aslan Ahadi et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Porous NiTi alloys produced by press-and-sinter from Ni/Ti and Ni/TiH2 mixtures

Gang Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Review Materials Science, Multidisciplinary

Manufacturing and processing of NiTi implants: A review

Mohammad H. Elahinia et al.

PROGRESS IN MATERIALS SCIENCE (2012)

添加到收藏夹

Review Materials Science, Multidisciplinary

High temperature shape memory alloys

J. Ma et al.

INTERNATIONAL MATERIALS REVIEWS (2010)

添加到收藏夹

Article Chemistry, Physical

On the transformation behaviour of NiTi particulate reinforced AA2124 composites

R. R. Thorat et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Chemistry, Physical

Processing of porous TiNi alloys using magnesium as space holder

Tarik Aydogmus et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermomechanical cyclic response of an ultrafine-grained NiTi shape memory alloy

B. Kockar et al.

ACTA MATERIALIA (2008)

添加到收藏夹

Article Chemistry, Physical

Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi

I. V. Shishkovsky et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

XPS study on the surface films of a newly designed Ni-free Ti-based bulk metallic glass

C. L. Qin et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Review Materials Science, Multidisciplinary

Physical metallurgy of Ti-Ni-based shape memory alloys

K Otsuka et al.

PROGRESS IN MATERIALS SCIENCE (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.