4.8 Article

Dual-Stacked Bidirectional Boost/Buck DC-DC Converter

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Electrical & Electronic

Single-Phase Isolated AC-AC Symmetrical Full-Bridge Converter

Olympio Ciprianoda da Silva Filho et al.

Summary: This work proposes an ac-ac converter based on interleaved transformers and a dual active bridge converter, which achieves high efficiency, bidirectional power flow, and high power density. The resulting symmetrical full-bridge converter reduces filter element dimensions and provides input power factor correction and a load voltage waveform with low harmonic content.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Analysis and Experimental Verification of an Isolated Half-Bridge Bidirectional DC-DC Converter

Matthias Schulz et al.

Summary: This article discusses the analysis of a zero voltage switched isolated bidirectional half-bridge active-clamp current-fed push-pull converter for a power of 1 kW. By combining active-clamping and advanced control scheme, this converter achieves soft-switching features, reducing overvoltage stress, voltage spikes, and reverse-recovery. The operating principles are analyzed and validated with measurements.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

A Battery Charging Method With Natural Synchronous Rectification Features for Full-Bridge CLLC Converters

Huan Chen et al.

Summary: This article proposes a natural synchronous rectification (SR) battery charging method for a full-bridge CLLC converter. By considering the parameter matching design process and SR control, the proposed method achieves a charging process with natural SR features. Experimental results demonstrate the effectiveness of the method and an obvious efficiency improvement.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Article Automation & Control Systems

Front-End Bidirectional Symmetric Bipolar Outputs LLC DC-Transformer (DCX) for a Half Bridge Class-D Audio Amplifier

Duo Xu et al.

Summary: This article proposes and studies a front-end bidirectional symmetric bipolar outputs LLC dc-transformer for a half bridge class-D audio amplifier system, which achieves soft switching in both positive and negative audio frequency cycles to improve system efficiency.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Bidirectional Soft Switching Push-Pull Resonant Converter Over Wide Range of Battery Voltages

Jong-Won Lim et al.

Summary: This article introduces a bidirectional soft-switching push-pull resonant converter that operates efficiently over a wide range of battery voltages, achieving almost zero-voltage switching at turn-off instants and maintaining high efficiency even during high-frequency operation. Additionally, the converter has a high conversion ratio in both power flow directions without the need for a transformer with a high turns ratio.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Automation & Control Systems

A Nonisolated Bidirectional DC-DC Converter With High Voltage Conversion Ratio Based on Coupled Inductor and Switched Capacitor

Renjun Hu et al.

Summary: This article introduces a nonisolated bidirectional dc-dc converter based on coupled inductor and switched capacitor, which can achieve a high voltage conversion ratio. The converter utilizes pulsewidth modulation plus phase-shift control, enabling zero voltage switching under a wide operating range to improve power conversion efficiency.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Article Automation & Control Systems

A Voltage-Quadrupler Interleaved Bidirectional DC-DC Converter With Intrinsic Equal Current Sharing Characteristic for Electric Vehicles

Hadi Moradisizkoohi et al.

Summary: The article introduces a voltage-quadrupler interleaved bidirectional dc-dc converter with intrinsic equal current sharing, suitable for electric vehicle applications. By adopting capacitive voltage-divider stage, it achieves high voltage gain and low voltage stress across switches, resulting in more efficient and cooler operation.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Article Automation & Control Systems

A Bidirectional Three-Phase Push-Pull Converter With Hybrid PPS-DAPWM Switching Method for High Power and Wide Voltage Range Applications

Tat-Thang Le et al.

Summary: This article proposes a hybrid switching method of dual-asymmetrical pulsewidth modulation (DAPWM) and pulsewidth modulation plus phase-shift (PPS) for efficiency improvement of the bidirectional three-phase push-pull converter with wide voltage range. A seamless mode change method and design considerations for leakage inductance and transformer turn ratio are also introduced, with experimental results from a 22-kW prototype validating the concept.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Multiphase Interleaved Bidirectional DC/DC Converter With Coupled Inductor for Electrified-Vehicle Applications

Robson Mayer et al.

Summary: The article describes a nonisolated high-power-density bidirectional dc/dc converter with a coupled inductor that allows for low current and voltage ripple, reduced power losses, and improved performance. Through the design, development, and testing of a laboratory prototype, the converter was shown to achieve high efficiency under wide load variation. Additionally, a comparison with previous converters was conducted to showcase the advantages of the proposed converter.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Review Engineering, Electrical & Electronic

Review on Advanced Control Technologies for Bidirectional DC/DC Converters in DC Microgrids

Qianwen Xu et al.

Summary: In DC microgrids, advanced control technologies are necessary to address the challenges brought by constant power loads and pulsed power loads. These technologies include model predictive control, backstepping control, sliding-mode control, passivity-based control, disturbance estimation techniques, intelligent control, and nonlinear modeling approaches. Furthermore, these techniques can also be applied in other high-power applications.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Analysis and Transition Techniques for a Bidirectional DC-DC Converter

Ambuj Sharma et al.

Summary: This study introduces two new pulsewidth modulation schemes to achieve smooth start-up and mode transition for a nonisolated bidirectional dc-dc converter. By developing effective transition techniques and designing different compensators, average current-mode control is achieved.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

A Wide Conversion Ratio Bidirectional Modified SEPIC Converter With Nondissipative Current Snubber

Marcos Paulo Hirth et al.

Summary: A new wide conversion ratio bidirectional dc-dc converter based on the modified Single-ended primary-inductor converter (SEPIC) converter is proposed, featuring a nondissipative current snubber for zero current switching and reduced switching losses with high efficiency. The converter offers intrinsic extended step-up and step-down voltage conversion ratios and reduced voltage stress in all semiconductors. Experimental results show the converter's performance with a 500-W prototype operating at V-1 = 48 V and V-2 = 300 V with efficiency higher than 95% in both operation modes.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

A Novel Non-Isolated Boost-Type Alternate Arm DC Transformer With Bidirectional Fault-Blocking Capability

Shenquan Liu et al.

Summary: This paper proposes a novel non-isolated Boost-type alternate arm DC transformer (Boost-AADCT) for medium- and high-voltage level DC grid application, which achieves bidirectional power transmission and reduces material cost. The Boost-AADCT utilizes an active power buffering method to effectively smooth pulsating power components during transmission.

IEEE TRANSACTIONS ON POWER DELIVERY (2021)

Article Engineering, Electrical & Electronic

A Novel Bidirectional Isolated DC-DC Converter With High Voltage Gain and Wide Input Voltage

Yu-En Wu et al.

Summary: This article proposes a novel bidirectional isolated dc-dc converter with high voltage gain and leakage inductance energy recovery. Experimental results verify its feasibility and high efficiency.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Zero-Voltage Transition Nonisolated Bidirectional Buck-Boost DC-DC Converter With Coupled Inductors

Mahdi Rezvanyvardom et al.

Summary: This article introduces a new zero-voltage transition pulse-width-modulated bidirectional DC-DC buck-boost converter, which features simple control, simple structure, and reduced stresses on power switches, making it suitable for various industrial applications. The converter achieves an efficiency around 97% at full load in both boost and buck modes and can be applied to other basic non-isolated bidirectional converters. The theoretical waveforms and suggested topology were validated through experiments conducted on a hardware prototype of a 100-W converter.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Article Computer Science, Information Systems

Survey of DC-DC Non-Isolated Topologies for Unidirectional Power Flow in Fuel Cell Vehicles

Mahajan Sagar Bhaskar et al.

IEEE ACCESS (2020)

Article Automation & Control Systems

A Bidirectional Two-Switch Flyback Converter With Cross-Coupled LCD Snubbers for Minimizing Circulating Current

Nurhakimah Mohd Mukhtar et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Article Automation & Control Systems

A Common Ground Switched-Quasi-Z-Source Bidirectional DC-DC Converter With Wide-Voltage-Gain Range for EVs With Hybrid Energy Sources

Yun Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

Article Automation & Control Systems

Modeling and Control Design of the Interleaved Double Dual Boost Converter

Fellipe S. Garcia et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2013)

Article Engineering, Electrical & Electronic

Electric Vehicle Battery Life Extension Using Ultracapacitors and an FPGA Controlled Interleaved Buck-Boost Converter

Jose M. Blanes et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2013)

Article Engineering, Electrical & Electronic

Study of a non-isolated bidirectional DC-DC converter

C. -C. Lin et al.

IET POWER ELECTRONICS (2013)

Article Automation & Control Systems

Analysis and Implementation of a Novel Bidirectional DC-DC Converter

Lung-Sheng Yang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2012)

Article Automation & Control Systems

Novel Forward-Flyback Hybrid Bidirectional DC-DC Converter

Fanghua Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2009)

Article Automation & Control Systems

Actively clamped bidirectional flyback converter

G Chen et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2000)