4.4 Article

Overview of the Electromagnetic Optimization Literature of Superconducting Solenoidal Magnets and Coils

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Electrical & Electronic

Globally Optimal Algorithm of Superconducting Magnet Design for Gyrotrons

Yunxing Song et al.

Summary: This paper presents a new hybrid global optimization method for designing a high-frequency gyrotron superconducting magnet. The method includes three routines to obtain different types of coil designs and the results show high efficiency and applicability to other superconducting magnet designs.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

Article Physics, Applied

Actively-shielded ultrahigh field MRI/NMR superconducting magnet design

Yaohui Wang et al.

Summary: Active shielding technology shows excellent performance in MRI and NMR magnet design, with optimization strategy being essential for ultra-high field superconducting magnet design.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

Article Physics, Applied

Electromagnetic design and stress analysis of an 8 T no-insulation HTS insert coil for 20 T magnet

Yiming Xie et al.

Summary: This paper focuses on the electromagnetic design and stress analysis of an 8T high temperature superconducting (HTS) insert coil, which is part of a 20T magnet using a 12T low temperature superconducting (LTS) magnet. The paper presents the use of a preserve elitist genetic algorithm for designing a cost-effective coil, and discusses the analysis of pre-stress, thermal stress, and electromagnetic stress during the winding, cooling down, and charging processes of the HTS insert coil.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2022)

Article Engineering, Electrical & Electronic

Optimized Design of a 170-GHz Gyrotron Magnet With Thermally Insulated Structures

Seokho Nam et al.

Summary: This study designs an electron cyclotron system for plasma heating, and a superconducting magnet is optimized to meet the requirements of the system. The design takes into consideration factors like stress, current margin, field uniformity, and losses, and also conducts quench analysis for safe operation.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

Article Engineering, Electrical & Electronic

Analytical Approach for Optimal HTS Solenoid Design

Pranoti R. Raut et al.

Summary: The article focuses on designing an HTS solenoid with maximum energy density using MATLAB optimization toolbox, and presents a mathematical formulation to determine the critical current of the coil. The critical current obtained is compared with literature, and the design results are validated with COMSOL model for critical current and magnetic fields.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2021)

Article Physics, Applied

Optimization of HTS Superconducting Solenoid Magnet Dimensions for Maximum Energy Density

Poulomi Mukherjee et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2020)

Article Engineering, Electrical & Electronic

Design of the Superconducting Main Magnet Based on Variable Density Method in Cylindrical MRI Scanner

Hongyi Qu et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

Article Engineering, Electrical & Electronic

Actively-Shielded Superconducting Magnet Design of a Large-Bore 7 T Animal MRI Scanner

Yaohui Wang et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

Article Engineering, Electrical & Electronic

An Optimal Design of Actively Shielded MRI Superconducting Magnet

Zhenguang Liang

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2019)

Article Engineering, Electrical & Electronic

A Novel Design Method of Independent Zonal Superconducting Shim Coil

Chaoqun Niu et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2019)

Article Engineering, Electrical & Electronic

Influence of Flux Diverter on Energy Storage Property of Small SMES Magnet Wound by 100-m-Class GdBCO Tape

Jian-Xun Jin et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2018)

Article Engineering, Electrical & Electronic

Stress Reduction and Storage Capacity Enhancement of the HTS-SMES Using Reinforcing Overbanding Structure

Yi Li et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)

Article Engineering, Electrical & Electronic

Design Considerations for High-Energy Density SMES

Jeremie Ciceron et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)

Article Thermodynamics

Design and optimization of a HTS insert for solenoid magnets

Giordano Tomassetti et al.

CRYOGENICS (2016)

Article Engineering, Electrical & Electronic

Performance Improvement of a Bi-2223 Solenoid Coil With Optimal Ferromagnetic Disks

Xiao Yuan Chen et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2016)

Article Engineering, Electrical & Electronic

A Parametric Study on Overband Radial Build for a REBCO 800-MHz Insert of a 1.3-GHz LTS/HTS NMR Magnet

Mingzhi Guan et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2016)

Article Physics, Fluids & Plasmas

Electromagnetic Optimization and Preliminary Mechanical Analysis of the CFETR CS Model Coil

Xiaogang Liu et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2016)

Article Engineering, Electrical & Electronic

The Mechanical Design Optimization of a High Field HTS Solenoid

S. L. Lalitha et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2015)

Article Physics, Nuclear

Design of SC solenoid with high homogeneity

Yang Xiao-Liang et al.

CHINESE PHYSICS C (2014)

Article Engineering, Electrical & Electronic

Performance Improvement and Optimization of New High-Temperature Superconducting Coil Assembly

Shinichi Ishiguri et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2014)

Article Engineering, Electrical & Electronic

The Effect of Flux Diverters on Energy Storage Capacity and Heat Losses in a HTS SMES

X. Deng et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2014)

Article Engineering, Electrical & Electronic

A Suitable Design Method of SMES Coil for Reducing Superconducting Wire Usage Considering Maximum Magnetic Flux Density

Y. Saichi et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2014)

Article Engineering, Electrical & Electronic

Evaluation of Step-Shaped Solenoidal Coils for Current-Enhanced SMES Applications

Xiao Y. Chen et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2014)

Article Physics, Applied

Design optimization of superconducting magnetic energy storage coil

Uttam Bhunia et al.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2014)

Article Engineering, Electrical & Electronic

A Fast Algorithm for Initial Design of HTS Coils for SMES Applications

Nuno Amaro et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2013)

Article Engineering, Electrical & Electronic

Globally Optimal Algorithm for Design of 0.7 T Actively Shielded Whole-Body Open MRI Superconducting Magnet System

Zhipeng Ni et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2013)

Article Engineering, Electrical & Electronic

Numerical Analysis of AC Loss Reduction in HTS Superconducting Coils Using Magnetic Materials to Divert Flux

Mark D. Ainslie et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2013)

Article Physics, Applied

A Novel Design Approach of High Temperature Superconducting Magnets by Cultural Evolution Algorithms

L. Chen et al.

JOURNAL OF LOW TEMPERATURE PHYSICS (2013)

Article Engineering, Multidisciplinary

A homogeneous superconducting magnet design using a hybrid optimization algorithm

Zhipeng Ni et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2013)

Article Engineering, Electrical & Electronic

Uniform Field Solenoid Optimization Study

Valeriy Lysenko

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2012)

Article Engineering, Electrical & Electronic

SMES Optimization for High Energy Densities

P. Tixador et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2012)

Article Engineering, Electrical & Electronic

A Superconducting Magnet System for Whole-Body Metabolism Imaging

Q. Wang et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2012)

Article Engineering, Electrical & Electronic

Geometry Optimization for SMES Solenoids Using HTS Ribbons

J. -M. Rey et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2011)

Article Engineering, Electrical & Electronic

Multiple Layer Superconducting Magnet Design for Magnetic Resonance Imaging

Chunzhong Wang et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2010)

Article Engineering, Electrical & Electronic

Optimization of the Superconducting and Mechanical Properties of Conductors for High Field Solenoid Magnets

Davide Uglietti et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2009)

Article Engineering, Electrical & Electronic

Design of Open High Magnetic Field MRI Superconducting Magnet With Continuous Current and Genetic Algorithm Method

Qiuliang Wang et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2009)

Article Engineering, Electrical & Electronic

Optimization design of SMES solenoids considering the coil volume and the magnet volume

Yu Xinjie et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2008)

Article Engineering, Electrical & Electronic

Pareto competition based evolution strategy for two-objective optimization design of SMES solenoids

Zhao Yuan et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2008)

Article Engineering, Electrical & Electronic

An optimal design of coaxial coils with constraints on inner and outer multipole magnetic fields

M Kitamura et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2004)

Article Engineering, Electrical & Electronic

Study on a cross section of high temperature superconducting coil

S Ishiguri et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2004)

Article Engineering, Electrical & Electronic

Scaling law of fringe fields as functions of stored energy and maximum magnetic field for SMES configurations

T Hamajima et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2004)

Article Engineering, Electrical & Electronic

Comparison of shape and topology optimization methods for HTS solenoid design

JK Byun et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2004)

Article Physics, Applied

Optimization of HTS superconducting magnetic energy storage magnet volume

A Korpela et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2003)

Article Engineering, Electrical & Electronic

A study on performance improvements of HTS coil

M Yamaguchi et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2003)

Article Engineering, Electrical & Electronic

Experimental study of solenoid using Bi2223/Ag tape with ferromagnetic disks

J Kondoh et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2003)

Article Engineering, Electrical & Electronic

AC loss measurement of HTS coils with ferromagnetic disks

M Furuse et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2003)

Article Engineering, Multidisciplinary

A design method for superconducting MRI magnets with ferromagnetic material

HW Zhao et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2002)

Article Engineering, Electrical & Electronic

Minimum-volume coil arrangements for generation of uniform magnetic fields

JH Jensen

IEEE TRANSACTIONS ON MAGNETICS (2002)

Article Chemistry, Physical

Current density mapping approach for design of clinical magnetic resonance imaging magnets

S Crozier et al.

CONCEPTS IN MAGNETIC RESONANCE (2002)

Article Physics, Applied

Radial magnetic field reduction to improve critical current of HTS solenoid

J Kang et al.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2002)

Article Engineering, Multidisciplinary

Rapid field calculations for the effect of ferromagnetic material in MRI magnet design

HW Zhao et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2002)

Article Engineering, Electrical & Electronic

Genetic algorithms for MRI magnet design

NR Shaw et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2002)

Article Engineering, Electrical & Electronic

An optimal design method for SMES coils using HTS tapes

S Noguchi et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2002)

Article Engineering, Electrical & Electronic

Shape optimization of high T-c superconducting magnets

V Cavaliere et al.

IEEE TRANSACTIONS ON MAGNETICS (2002)

Article Engineering, Electrical & Electronic

An optimal design method for superconducting magnets using HTS tape

S Noguchi et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2001)

Article Radiology, Nuclear Medicine & Medical Imaging

A hybrid, inverse approach to the design of magnetic resonance imaging magnets

HW Zhao et al.

MEDICAL PHYSICS (2000)

Article Engineering, Electrical & Electronic

Optimization of SMES magnet volume with electromagnetic and mechanical constraints

A Korpela et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2000)

Article Engineering, Electrical & Electronic

Homogeneous magnet design using linear programming

H Xu et al.

IEEE TRANSACTIONS ON MAGNETICS (2000)