☆ 4.7 Article

Assessment of influences of needle lift and hole height on string cavitation in liquid injection

FUEL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Eulerian-Lagrangian modeling of spray G atomization with focus on vortex evolution and its interaction with cavitation

Wenchuan Liu et al.

Summary: This study investigates the internal flow and its role in energy consumption and emissions, focusing on the intricate three-phase flow patterns in an orifice. By analyzing vorticity interactions with cavitation, it is found that cavitation is triggered by vortex evolution. The study also successfully predicts spray morphologies using a coupled model that incorporates internal flow data, demonstrating less dependence on grid resolution and validating the proposed model.

APPLIED MATHEMATICAL MODELLING (2022)

添加到收藏夹

Article Mechanics

Assessment of turbulence and cavitation models in prediction of vortex induced cavitating flow in fuel injector nozzles

Zhixia He et al.

Summary: Vortex-induced cavitation is developed in high pressure fuel injector equipment, which is related to local flow turbulence and can be improved in prediction accuracy by adopting different turbulence models and mass transfer cavitation models.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2022)

添加到收藏夹

Article Thermodynamics

Optical investigations of nozzle geometrical and dynamic factors on formation and development characteristics of string cavitation with large-scale diesel tapered-hole nozzles

Wei Guan et al.

Summary: Cavitation is an essential physical phenomenon in diesel engines, with special attention given to vortex-induced cavitation and string cavitation formation and development. High-speed imaging technology was used to capture the processes in scaled-up transparent replicas of diesel tapered-hole nozzles, showing that string cavitation tends to occur in the middle of the nozzle holes and is influenced by needle lifts and cavitation number. It was also observed that shedding bubbles from geometry-induced cavitation can stimulate the inception of string cavitation.

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)

添加到收藏夹

Article Mechanics

A new Euler-Lagrangian cavitation model for tip-vortex cavitation with the effect of non-condensable gas

Huaiyu Cheng et al.

Summary: This study introduces a new numerical simulation model for tip vortex cavitation that takes into account the influence of non-condensable gas. By considering gas content, a significant improvement in predicting tip vortex cavitation was achieved. The research highlights the crucial role of gas content in cavitation development.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2021)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of transient hole-to-hole variation in cavitation regimes inside a multi-hole diesel nozzle

Genmiao Guo et al.

Summary: This study investigates the impact of needle motion on the evolution of in-nozzle cavitation regimes, revealing different characteristics of needle and hole connecting string cavitation at low and high needle lifts. The formation of both types of string cavitation is strongly influenced by the structure and intensity of in-nozzle vortex flow.

FUEL (2021)

添加到收藏夹

Article Energy & Fuels

Investigations on interactions between vortex flow and the induced string cavitation characteristics in real-size diesel tapered-hole nozzles

Wei Guan et al.

Summary: The study investigated vortex-induced string cavitation in a real-size diesel tapered-hole injector nozzle through experiments and numerical simulations. Intermittent string cavitation mainly occurs in the SAC chamber and near the hole exit due to the complex distribution of vortices. The vortex stretching term is identified as the dominant factor for the formation and development of string cavitation.

FUEL (2021)

添加到收藏夹

Article Mechanics

Euler-Lagrange study of cavitating turbulent flow around a hydrofoil

Ziyang Wang et al.

Summary: This study introduces a multi-scale Eulerian-Lagrangian approach to simulate cavitating turbulent flow around a Clark-Y hydrofoil and study bubble dynamics. Numerical predictions show good agreement with experimental data, and the influence of various parameters on the transformation between Euler and Lagrange models is analyzed.

PHYSICS OF FLUIDS (2021)

添加到收藏夹

Article Thermodynamics

Effects of nozzle configuration on flash boiling fuel sprays of twin-orifice nozzle with aviation kerosene

Junjie Miao et al.

Summary: The study found that under high superheated conditions, bubbles formed and aggregated due to cavitation at the inlet orifice wall, significantly promoting fuel atomization and evaporation. Additionally, a smaller orifice diameter ratio resulted in larger internal bubble volumes, while increasing the expansion chamber's aspect ratio inhibited bubble formation. Furthermore, reducing the orifice diameter ratio facilitated the flash boiling process, while near-nozzle mechanical breakup helped produce higher-quality spray.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Mechanics

Numerical assessment of the erosion risk for cavitating twisted hydrofoil by three methods

Ting-ting Lei et al.

Summary: This paper adopts the LES method and Zwart cavitation model to evaluate erosion risk on a hydrofoil surface, using three methods including IFM, TAIs and GLM. IFM's erosion intensity index is highly sensitive to thresholds, limiting its application; predictions by the four indicators in TAIs do not align well with experiments; GLM using instantaneous pressure field is satisfactory, while using time-average pressure field improves erosion risk prediction accuracy.

JOURNAL OF HYDRODYNAMICS (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A three-phase VOF solver for the simulation of in-nozzle cavitation effects on liquid atomization

F. Giussani et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Large eddy simulation of the tip-leakage cavitating flow with an insight on how cavitation influences vorticity and turbulence

H. Y. Cheng et al.

APPLIED MATHEMATICAL MODELLING (2020)

添加到收藏夹

Article Thermodynamics

Experimental study on the effect of vortex cavitation in scaled-up diesel injector nozzles and spray characteristics

Tianyi Cao et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

EXPERIMENTAL STUDY ON THE EFFECT OF CAVITATION ON PRESSURE FLUCTUATIONS IN OPTICAL DIESEL NOZZLES AND SPRAY CHARACTERISTICS

Tianyi Cao et al.

ATOMIZATION AND SPRAYS (2020)

添加到收藏夹

Article Mechanics

Verification and validation of Large Eddy Simulation of attached cavitating flow around a Clark-Y hydrofoil

Yun Long et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2019)

添加到收藏夹

Article Thermodynamics

First observation and characterization of vortex flow in steel micronozzles for high-pressure diesel injection

Seoksu Moon et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2019)

添加到收藏夹

Review Engineering, Aerospace

Quantification of model uncertainty in RANS simulations: A review

Heng Xiao et al.

PROGRESS IN AEROSPACE SCIENCES (2019)

添加到收藏夹

Article Energy & Fuels

In-nozzle flash boiling flow of multi-component fuel and its effect on near-nozzle spray

Shangze Yang et al.

FUEL (2019)

添加到收藏夹

Article Thermodynamics

Simulations on the cavitating flow and corresponding risk of erosion in diesel injector nozzles with double array holes

Liang Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Mechanics

Large eddy simulation and Euler-Lagrangian coupling investigation of the transient cavitating turbulent flow around a twisted hydrofoil

Xinping Long et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2018)

添加到收藏夹

Article Engineering, Marine

Numerical simulation for the tip leakage vortex cavitation

Qiang Guo et al.

OCEAN ENGINEERING (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of methods for vortex identification in hydroturbines

Yuning Zhang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Mechanics

Improvement of cavitation mass transfer modeling based on local flow properties

A. Asnaghi et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2017)

添加到收藏夹

Article Thermodynamics

Visual experiment of transient cavitating flow characteristics in the real-size diesel injector nozzle

Zhixia He et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Physics, Multidisciplinary

New omega vortex identification method

ChaoQun Liu et al.

SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2016)

添加到收藏夹

Article Thermodynamics

Visualization analysis of relationship between vortex flow and cavitation behavior in diesel nozzle

Hiroki Watanabe et al.

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2015)

添加到收藏夹

Article Engineering, Marine

Influence of the empirical coefficients of cavitation model on predicting cavitating flow in the centrifugal pump

Hou-lin Liu et al.

International Journal of Naval Architecture and Ocean Engineering (2015)

添加到收藏夹

Article Engineering, Marine

Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation-vortex interaction

Bin Ji et al.

OCEAN ENGINEERING (2014)

添加到收藏夹

Article Energy & Fuels

The effect of temperature and pressure on thermodynamic properties of diesel and biodiesel fuels

R. Payri et al.

FUEL (2011)

添加到收藏夹

Article Mechanics

Comparison of mass transfer models for the numerical prediction of sheet cavitation around a hydrofoil

Mitja Morgut et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2011)

添加到收藏夹

Article Mechanics

Characterization of string cavitation in large-scale Diesel nozzles with tapered holes

M. Gavaises et al.

PHYSICS OF FLUIDS (2009)

添加到收藏夹

Article Thermodynamics

Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions

M. Gavaises

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2008)

添加到收藏夹

Article Engineering, Mechanical

Mathematical basis and validation of the full cavitation model

AK Singhal et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2002)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A preconditioned Navier-Stokes method for two-phase flows with application to cavitation prediction

RF Kunz et al.

COMPUTERS & FLUIDS (2000)

添加到收藏夹

Article Engineering, Aerospace

Turbulence modeling in rotating and curved channels: Assessing the Spalart-Shur correction

ML Shur et al.

AIAA JOURNAL (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.