☆ 4.7 Article

Characterization of the mechanical properties of high-moisture meat analogues using low-intensity ultrasound: Linking mechanical properties to textural and nutritional quality attributes

FOOD RESEARCH INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Food Science & Technology

Investigating the Potential of Full-Fat Soy as an Alternative Ingredient in the Manufacture of Low- and High-Moisture Meat Analogs

Yung-Hee Jeon et al.

Summary: The increase in meat consumption could have negative impacts on the environment, so there is a growing interest in meat analogs. Soy protein isolate is commonly used to produce low- and high-moisture meat analogs, while full-fat soy is a promising ingredient for these analogs. This study manufactured low- and high-moisture meat analogs with full-fat soy and investigated their physicochemical properties. The results showed that the properties of the analogs varied with the content of full-fat soy, with some improvements in the fibrous structure of low-moisture analogs and the need for further research on high-moisture analogs.

FOODS (2023)

添加到收藏夹

Review Food Science & Technology

Thermo-mechanical processing of plant proteins using shear cell and high-moisture extrusion cooking

Steven H. Cornet et al.

Summary: This review discusses the effect of thermo-mechanical processing on the physicochemical properties and phase behavior of proteins and protein mixtures, emphasizes the crucial role of the breaker plate in fibrillation, and points out the limited tools and mechanisms for studying protein-protein interactions.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2022)

添加到收藏夹

Article Food Science & Technology

Physical Properties of Extrudates with Fibrous Structures Made of Faba Bean Protein Ingredients Using High Moisture Extrusion

Katja Kantanen et al.

Summary: This study found that using faba bean protein ingredients can produce meat analogues with a fibrous structure. Increasing the content of faba bean protein isolate (FPI) increases the hardness, gumminess, chewiness, and cutting strength of the meat analogues, resulting in darker color and decreased water absorption capacity. Increased feed water content (FWC) has a weaker and opposite effect on these properties.

FOODS (2022)

添加到收藏夹

Article Chemistry, Applied

Differences in physicochemical properties of high-moisture extrudates prepared from soy and pea protein isolates

Hong Wang et al.

Summary: This study compares the physicochemical properties of high-moisture extrudates made from soy protein and pea protein at different temperatures. Higher temperatures result in more anisotropic structures and darker extrudates. Pea protein extrudates have more fibrous structures than soy protein extrudates at the same temperature. The textural and rheological properties of soy protein extrudates increase significantly with temperature. Compared to soy protein extrudates, pea protein extrudates show weaker shear thinning behavior and have less hardness, chewiness, and tensile strength.

FOOD HYDROCOLLOIDS (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

Potential Development of Sustainable 3D-Printed Meat Analogues: A Review

Karna Ramachandraiah

Summary: In order to mitigate the threat of climate change driven by livestock meat production, a multifaceted approach is proposed, including dietary changes, innovative product development, technological advances, and reductions in food waste/losses. The emerging technology of 3D printing is recognized for its capacity to fabricate intricate food products with reduced material cost and energy consumption, with possible materials for sustainable printing of meat substitutes being analyzed for their environmental effects, technological viability, and consumer acceptance. Despite challenges such as lack of food-safe materials, cost-effectiveness, and consumer acceptance, sustainable 3D printing of meat analogues could be enhanced through utilization of generic components, optimization of cell sourcing, and material flow improvements.

SUSTAINABILITY (2021)

添加到收藏夹

Article Food Science & Technology

High Moisture Extrusion of Soy Protein: Investigations on the Formation of Anisotropic Product Structure

Patrick Wittek et al.

Summary: The high moisture extrusion of plant proteins is suitable for producing protein-rich products that imitate meat. Anisotropic structures are formed by extrusion at high moisture content and elevated temperatures, and are influenced by material temperature. The mechanism behind this structure formation is still not fully understood, with ongoing discussions focusing on protein alignment or morphology development in multiphase systems.

FOODS (2021)

添加到收藏夹

Article Chemistry, Applied

Mapping the texture of plant protein blends for meat analogues

Floor K. G. Schreuders et al.

Summary: The analysis of rheological properties of plant protein blends can accelerate the development of next-gen meat analogues. Pea protein-wheat gluten blends have lower strain, stress, and elasticity values compared to soy protein-wheat gluten blends, which are tougher and more elastic than pea protein-wheat gluten blends. Soy protein-wheat gluten blends show almost similar texture properties for both components.

FOOD HYDROCOLLOIDS (2021)

添加到收藏夹

Article Nutrition & Dietetics

Nutritional Quality of Plant-Based Meat Products Available in the UK: A Cross-Sectional Survey

Roberta Alessandrini et al.

Summary: Plant-based meat products have lower energy density, fat, protein, and higher fiber compared to meat products, but show higher salt content. The UK's Nutrient Profiling Model indicates that PBM products are healthier than meat products, but more efforts are needed to reduce salt content in PBM.

NUTRIENTS (2021)

添加到收藏夹

Article Food Science & Technology

The effect of cooling and rehydration methods in high moisture meat analogs with pulse proteins-peas, lentils, and faba beans

Taehoon Kim et al.

Summary: Pulse proteins can serve as an alternative source to soy proteins, and using a 2% brine solution for cooling and rehydration by boiling can help reduce the water solubility index.

JOURNAL OF FOOD SCIENCE (2021)

添加到收藏夹

Article Food Science & Technology

High-Moisture Meat Analogues Produced from Yellow Pea and Faba Bean Protein Isolates/Concentrate: Effect of Raw Material Composition and Extrusion Parameters on Texture Properties

Ferawati Ferawati et al.

Summary: This study examines the functionality of local yellow pea and faba bean protein isolates/concentrates as meat analogue products and successfully produces high-moisture meat analogues with fibrous layered structures through extrusion. The texture properties of the HMMA are mainly influenced by protein content, ash, fiber, water-holding capacity, and extrusion process parameters.

FOODS (2021)

添加到收藏夹

Article Food Science & Technology

Thermal processing methods differentially affect the protein quality of Chickpea (Cicer arietinum)

Matthew G. Nosworthy et al.

FOOD SCIENCE & NUTRITION (2020)

添加到收藏夹

Article Chemistry, Applied

Effects of material characteristics on the structural characteristics and flavor substances retention of meat analogs

Zengwang Guo et al.

FOOD HYDROCOLLOIDS (2020)

添加到收藏夹

Article Food Science & Technology

Development of High-Moisture Meat Analogues with Hemp and Soy Protein Using Extrusion Cooking

Izalin Zahari et al.

FOODS (2020)

添加到收藏夹

Review Food Science & Technology

Changes in conformation and quality of vegetable protein during texturization process by extrusion

Jinchuang Zhang et al.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2019)

添加到收藏夹

Article Food Science & Technology

Online non-contact quality control of noodle dough using ultrasound

S. O. Kerherve et al.

FOOD CONTROL (2019)

添加到收藏夹

Article Engineering, Chemical

Comparing structuring potential of pea and soy protein with gluten for meat analogue preparation

Floor K. G. Schreuders et al.

JOURNAL OF FOOD ENGINEERING (2019)

添加到收藏夹

Article Agriculture, Multidisciplinary

High moisture extrusion of lupin protein: influence of extrusion parameters on extruder responses and product properties

Megala Palanisamy et al.

JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (2019)

添加到收藏夹

Article Food Science & Technology

Physical properties of puffed yellow pea snacks produced by nitrogen gas assisted extrusion cooking

Filiz Koksel et al.

LWT-FOOD SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Agriculture, Multidisciplinary

Impact of Processing on the Protein Quality of Pinto Bean (Phaseolus vulgaris) and Buckwheat (Fagopyrum esculentum Moench) Flours and Blends, As Determined by in Vitro and in Vivo Methodologies

Matthew G. Nosworthy et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2017)

添加到收藏夹

Review Food Science & Technology

Ultrasound as a tool to study bubbles in dough and dough mechanical properties: A review

Filiz Koksel et al.

FOOD RESEARCH INTERNATIONAL (2016)

添加到收藏夹

Article Engineering, Chemical

Experimental characterisation and numerical modelling of cutting processes in viscoelastic solids

Martin Boisly et al.

JOURNAL OF FOOD ENGINEERING (2016)

添加到收藏夹

Article Food Science & Technology

In Situ Ultrasonic Characterization of Cocoa Butter Using a Chirp

Michaela Haeupler et al.

FOOD AND BIOPROCESS TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Chemical

High moisture extrusion cooking of pea protein isolates: Raw material characteristics, extruder responses, and texture properties

Raffael Osen et al.

JOURNAL OF FOOD ENGINEERING (2014)

添加到收藏夹

Article Food Science & Technology

Effects of composition on dough development and air entrainment in doughs made from gluten-starch blends

F. Koksel et al.

JOURNAL OF CEREAL SCIENCE (2012)

添加到收藏夹

Article Engineering, Chemical

Particle size-starch-protein digestibility relationships in cowpea (Vigna unguiculata)

T. Tinus et al.

JOURNAL OF FOOD ENGINEERING (2012)

添加到收藏夹

Article Radiology, Nuclear Medicine & Medical Imaging

Noncontact ultrasound imaging applied to cortical bone phantoms

J. B. Bulman et al.

MEDICAL PHYSICS (2012)

添加到收藏夹

Article Agriculture, Dairy & Animal Science

Physical properties, molecular structures, and protein quality of texturized whey protein isolate: Effect of extrusion moisture content

P. X. Qi et al.

JOURNAL OF DAIRY SCIENCE (2011)

添加到收藏夹

Article Agriculture, Multidisciplinary

Comparison of ultrasonic velocities in dispersive and nondispersive food materials

Laura A. E. B. Cobus et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2007)

添加到收藏夹

Review Food Science & Technology

Nutritional aspects of food extrusion: a review

Shivendra Singh et al.

INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Article Chemistry, Applied

In situ monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

S Martini et al.

JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2005)

添加到收藏夹

Article Food Science & Technology

Extrusion process parameters, sensory characteristics, and structural properties of a high moisture soy protein meat analog

S Lin et al.

JOURNAL OF FOOD SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.