☆ 4.5 Article

Uncertainty for fatigue life of low carbon alloy steel based on improved bootstrap method

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Experimental investigation of the relation between the surface integrity and bending fatigue strength of carburized gears

DiFa Chen et al.

Summary: In this study, bending fatigue tests were conducted on carburized gears with different surface integrities to investigate the effects of manufacturing parameters and surface integrities on gear fatigue. The experimental results revealed that the improvement of surface integrities after shot peening increased the nominal bending stress number (fatigue limit) by 6.3%-31.1%, with an amplitude range of 39-143 MPa. A supervised learning algorithm of a random forest was used to determine the contribution of surface hardness and surface residual stress to the nominal stress number, and an empirical formula was proposed to predict the nominal stress number considering the surface integrities, with a prediction error of less than 7.53%.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2023)

添加到收藏夹

Article Engineering, Civil

Parameter Estimation for Univariate Hydrological Distribution Using Improved Bootstrap with Small Samples

Hanlin Li et al.

Summary: This study proposes an improved Bootstrap method and combines it with three commonly used parameter estimation methods, i.e., improved Bootstrap with method of moments (IBMOM), maximum likelihood estimation (IBMLE), and maximum entropy principle (IBMEP). A series of numerical experiments and a case study on the estimation of distribution parameters demonstrate that the proposed methods provide more accurate and less deviated results compared to conventional Bootstrap and without-Bootstrap approaches. Moreover, the improved Bootstrap method shows significant improvement in parameter estimation when smaller sample size is used. The method based on improved Bootstrap offers a new solution to the requirement of large sample size in quality hydrological frequency analysis.

WATER RESOURCES MANAGEMENT (2023)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Uncertainty-Based Analysis of Random Load Signal and Fatigue Life for Mechanical Structures

Xintian Liu et al.

Summary: This paper proposes a processing method for random load signals to handle uncertainty, by converting the collected load signals into interval load signals and carrying out peak-over-threshold extrapolation based on the generalized Pareto distribution to predict the fatigue life of mechanical structures more accurately.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of carburizing process on high cycle fatigue behavior of 18CrNiMo7-6 steel

Shengwei Qin et al.

Summary: This research studied the effects of carburizing process on the material properties and fatigue performance of 18CrNiMo7-6 gear steel. The evolution processes of hardness, microstructure, and residual stress of carburized specimens during fatigue testing were observed, and the initiation of fatigue cracks and the transformation of retained austenite were analyzed. The results showed that the fatigue strength of carburized specimens increased and then decreased with the increase of effective case depth, and the fatigue failure mode changed from surface failure to internal failure after carburizing.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

Evaluation and prediction of material fatigue characteristics under impact loads: review and prospects

Xintian Liu et al.

Summary: The impact load has significant importance on materials, different materials exhibit different performance under impact load, and there are numerous research methods. Factors such as temperature, gap, and load speed play a role in the impact load situation.

INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Small samples data augmentation and improved MobileNet for surface defects classification of hot-rolled steel strips

Liyuan Lin et al.

Summary: Surface defects in hot-rolled steel strips are a common problem in the steel industry. We propose a random offline data augmentation algorithm and an improved MobileNet architecture to address this issue. Experimental results demonstrate that our method outperforms existing methods in terms of accuracy and real-time performance.

JOURNAL OF ELECTRONIC IMAGING (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental estimation of the residual fatigue life of in-service wind turbine bolts

A. Rincon-Casado et al.

Summary: This study presents an experimental methodology for estimating the residual fatigue life of in-service wind turbine bolts. The objective is to assess the remaining life of the bolts to plan replacement and avoid unexpected breakages of wind turbine blade connections.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Mechanical

Random fatigue life prediction of automobile lower arm via modified Corten-Dolan model

Xizhou Yang et al.

Summary: This study investigates the fatigue life of the rear suspension lower arm of a passenger car. The road load signals are collected and processed, and the distribution characteristics are analyzed. A parametric method is used to extrapolate the load signal and compile a one-dimensional load spectrum of the lower arm. The Corten-Dolan model is modified based on nonlinear fatigue cumulative damage theory, and an improved fatigue life prediction model is established and validated with experimental data.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An improved bootstrap method introducing error ellipse for numerical analysis of fatigue life parameters

Haiyan Ge et al.

Summary: This paper introduces error ellipse into the bootstrap method to improve the reliability of small samples and the credibility of the S-N curve. Two error ellipse models are proposed based on the bootstrap method and the reliability of the original samples. Case analysis proves the feasibility of the tangent error ellipse method and its impact on the accuracy of parameter estimation with small samples.

ENGINEERING COMPUTATIONS (2021)

添加到收藏夹

Article Plant Sciences

A bootstrap approach is a superior statistical method for the comparison of non-normal data with differing variances

Matthew G. Johnston et al.

NEW PHYTOLOGIST (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Reliability analysis of excavator boom considering mixed uncertain variables

Yuru Zhang et al.

Summary: This study introduces an α, β-Cut-FORM method for analyzing the reliability of structures considering mixed uncertain variables, including optimization of fuzzy variables and interval variables. The method involves nested probabilistic analysis and interval analysis, providing an effective approach for the reliable design of excavator booms.

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL (2021)

添加到收藏夹

Article Mechanics

A machine-learning fatigue life prediction approach of additively manufactured metals

Hongyixi Bao et al.

Summary: In this study, the influence of defects on the fatigue life of selective laser melted Ti-6Al-4V alloy was explored using a machine learning method, specifically supported by a support vector machine. Through a combination of high cycle fatigue post mortem examination and synchrotron X-ray tomography, geometric features of critical defects were acquired and trained. The results showed a high coefficient of determination of 0.99 between predicted and experimental fatigue lives, indicating strong training ability of the SVM model.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Aerospace

Improved uncertain method for safety analysis of aircraft landing gear

Xintian Liu et al.

Summary: This article discusses dealing with uncertain factors in practical engineering applications and proposes a new mixed method to represent the confidence interval of output results. The feasibility of the proposed methods is verified through a stepped bar and applied to analyzing aircraft landing gear safety uncertainty.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Strength uncertainty analysis of composite turbine blade with small sample size

Gaoxiang Chen et al.

Summary: This study established a simplified simulation method to determine the randomness of material behavior in SiC/SiC ceramic matrix composites (CMCs), which exhibit significant randomness of damage processes under load. The reliability and error of the characterization methods were compared with specimens using extreme-value interval, tolerance interval, evidence theory, and fuzzy set method. The randomness of mechanical behavior was more evident at the damage stage, with the uncertainty of material behavior reliant on the loading state.

STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Fatigue and damage tolerance assessment of induction hardened S38C axles under different foreign objects

Jie-Wei Gao et al.

Summary: This study focuses on the impact of surface damages caused by flying objects on the fatigue performance of high-speed railway axles. Results show that fatigue strength decreases with increase in damage depth, and factors such as damage orientation, shape, and microstructural damage also play a role. Evaluation of fatigue strength reduction is performed based on damage tolerance philosophy in order to assess maintenance needs for these axles.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Engineering, Mechanical

A time series model-based method for gear tooth crack detection and severity assessment under random speed variation

Yuejian Chen et al.

Summary: This paper presents a time series model-based method for gear tooth crack detection and severity assessment under random speed variation. The proposed method outperforms the novelty diagnostic method and SVM-based method in accuracy, correctly assessing 93.8% of tooth crack severity states.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of shot peening coverage on residual stress and surface roughness of 18CrNiMo7-6 steel

Jizhan Wu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Mechanical

Small sample test approach for obtaining P-S-N curves based on a unified mathematical model

Jianxiong Gao et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Review Engineering, Mechanical

Determination of the fatigue P-S-N curves - A critical review and improved backward statistical inference method

Cunhai Li et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Parameter distribution characteristics of material fatigue life using improved bootstrap method

Minghui Zhang et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2019)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Testing Model Fit by Bootstrap Selection

Steffen Gronneberg et al.

STRUCTURAL EQUATION MODELING-A MULTIDISCIPLINARY JOURNAL (2019)

添加到收藏夹

Article Statistics & Probability

Investigation of parameter uncertainty in clustering using a Gaussian mixture model via jackknife, bootstrap and weighted likelihood bootstrap

Adrian O'Hagan et al.

COMPUTATIONAL STATISTICS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Machine learning algorithm validation with a limited sample size

Andrius Vabalas et al.

PLOS ONE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fatigue reliability assessment of small sample excavator working devices based on Bootstrap method

Yuhong Shao et al.

FRATTURA ED INTEGRITA STRUTTURALE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Probabilistic modeling of unified S-N curves for mechanical parts

Minlong Wang et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2018)

添加到收藏夹

Article Engineering, Chemical

An application of bootstrap method for analysis of particle size distribution

Tatsushi Matsuyama

ADVANCED POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Mechanical

Automated modal parameter estimation using correlation analysis and bootstrap sampling

Vahid Yaghoubi et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

The nature and the mechanism of crack initiation and early growth for very-high-cycle fatigue of metallic materials - An overview

Youshi Hong et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Bootstrap Confidence Intervals of the Modified Process Capability Index for Weibull distribution

Muhammad Kashif et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2017)

添加到收藏夹

Article Statistics & Probability

Bootstrap methods for long-memory processes: a review

Young Min Kim et al.

COMMUNICATIONS FOR STATISTICAL APPLICATIONS AND METHODS (2017)

添加到收藏夹

Article Engineering, Aerospace

Weapon systems accuracy evaluation using the error spectrum

Weishi Peng et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Model based bootstrap methods for interval censored data

Bodhisattva Sen et al.

COMPUTATIONAL STATISTICS & DATA ANALYSIS (2015)

添加到收藏夹

Article Engineering, Mechanical

Base material fatigue data for low alloy forged steels used in the subsea industry. Part 1: In air S-N data

Anders Wormsen et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

The performance of methods to test upper-level mediation in the presence of nonnormal data

Keenan A. Pituch et al.

MULTIVARIATE BEHAVIORAL RESEARCH (2008)

添加到收藏夹

Article Engineering, Mechanical

Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety

C. M. Sonsino

INTERNATIONAL JOURNAL OF FATIGUE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.