☆ 4.7 Article

Void growth in metal anodes in solid-state batteries: Recent progress and gaps in understanding

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Accelerated Short Circuiting in Anode-Free Solid-State Batteries Driven by Local Lithium Depletion

John A. Lewis et al.

Summary: Anode-free solid-state batteries demonstrate high energy density, and commercially relevant quantities of lithium can be plated reliably at moderate current densities using a sulfide solid-state electrolyte. The cycling stability of these batteries is limited by the nonuniform presence of lithium during stripping, leading to high local current densities and void formation. However, thicker lithium at the interface can improve resistance to short circuiting.

ADVANCED ENERGY MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

How Does the Creep Stress Regulate Void Formation at the Lithium-Solid Electrolyte Interface during Stripping?

Hanghang Yan et al.

Summary: Research has shown that in the presence of interfacial defects at the Li/solid electrolyte interface, the creep-induced flux enhancement of vacancies is the primary mechanism that impedes void formation. In contrast to simulations on an ideal flat Li/solid electrolyte interface, interfaces with defects have a greater impact on void formation.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Direct correlation between void formation and lithium dendrite growth in solid-state electrolytes with interlayers

Vikalp Raj et al.

Summary: Using metallic interlayers in solid-state Li half-cells reduces void growth and improves tolerance to dendrite growth.

NATURE MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

The void formation behaviors in working solid-state Li metal batteries

Yang Lu et al.

Summary: This study uncovers the principles of interfacial void evolution in solid-state batteries and establishes a model for void nucleation and growth. Through electrochemical calculations and in situ observations, the microscopic features of void defects under different stripping conditions are studied, and the quantification of void-induced contact loss processes is conducted. The electrochemical-morphological relationship helps to understand and design solid-solid interfaces for advanced solid-state batteries.

SCIENCE ADVANCES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Void growth within Li electrodes in solid electrolyte cells

J. A. B. Agier et al.

Summary: The growth of voids at the electrode/electrolyte interface in solid-state Li batteries is analyzed using a framework that incorporates power-law creep deformation of the Li electrode and Li+ flux through a single-ion conductor solid electrolyte. The results suggest that void growth is influenced by the interfacial resistance, electrolyte conductivity, and the presence of dislocations within the electrode. The findings provide insights into the failure mechanisms of Li batteries due to void growth.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A phase field electro-chemo-mechanical formulation for predicting void evolution at the Li-electrolyte interface in all-solid-state batteries

Ying Zhao et al.

Summary: A mechanistic theory for predicting void evolution in all-solid-state battery cells is presented. The theory incorporates phase field formulation, viscoplastic description of Li deformation, mass transfer formulation and interaction between the electrode and the solid electrolyte to resolve the coupled electro-chemical mechanical problem. Numerical implementation and case studies show that the model can capture the main experimental observations.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2022)

添加到收藏夹

Article Chemistry, Physical

Analyzing void formation and rewetting of thin in situ-formed Li anodes on LLZO

Kiwoong Lee et al.

Summary: The stripping behavior of thin Li electrodes on solid electrolytes is investigated, showing that the accessible discharge capacity increases with lower current density and thicker Li anode. Two different mechanisms are identified for the stripping of thin Li electrodes depending on the current density. It is also demonstrated that the de-wetted Li/LLZO interfaces can be reestablished by thermal treatment.

JOULE (2022)

添加到收藏夹

Article Chemistry, Physical

The initiation of void growth during stripping of Li electrodes in solid electrolyte cells

Siamak S. Shishvan et al.

Summary: The study reveals the importance of considering power-law creep and dislocation motion in predicting void growth in the Li electrode. The modified Butler-Volmer kinetics for the interface flux associated with creep deformation of the Li electrode in a single-ion conductor solid electrolyte is key in understanding the process.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Evolving contact mechanics and microstructure formation dynamics of the lithium metal-Li7La3Zr2O12 interface

Wesley Chang et al.

Summary: The authors investigate the chemo-mechanical changes at the lithium metal/solid electrolyte interface via operando acoustic transmission and magnetic resonance imaging.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Visualizing plating-induced cracking in lithium-anode solid-electrolyte cells

Ziyang Ning et al.

Summary: The propagation of lithium dendrites and cracks through ceramic electrolytes can lead to short circuits in batteries. The cracks initiate near the surface of the lithium electrode and propagate transversely across the electrolyte, driven by lithium ingress.

NATURE MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

An assessment of a mechanism for void growth in Li anodes

U. Roy et al.

Summary: The growth of voids in the solid-state electrolyte of a Lithium (Li) ion battery is influenced by the presence of pre-existing imperfections, with larger imperfections of over 1200 μm being necessary for void initiation. Experimental observations, however, suggest that voids as small as 1 μm can initiate, highlighting a discrepancy with the current model that involves power-law creep of the Li anode combined with Butler-Volmer kinetics.

EXTREME MECHANICS LETTERS (2021)

添加到收藏夹

Review Chemistry, Physical

Transitioning solid-state batteries from lab to market: Linking electro-chemo-mechanics with practical considerations

Michael J. Wang et al.

Summary: SSBs have the potential to replace Li-ion batteries, but they still face challenges. Recent technological advancements are focusing on overcoming these challenges around the electrochemical, thermal, and mechanical properties.

JOULE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sodium/Na β Alumina Interface: Effect of Pressure on Voids

Dominic Spencer Jolly et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Li metal deposition and stripping in a solid-state battery via Coble creep

Yuming Chen et al.

NATURE (2020)

添加到收藏夹

Article Chemistry, Physical

Dendrites as climbing dislocations in ceramic electrolytes: Initiation of growth

S. S. Shishvan et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Growth rate of lithium filaments in ceramic electrolytes

S. S. Shishvan et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Electrochemistry

Molar Volume Mismatch: A Malefactor for Irregular Metallic Electrodeposition with Solid Electrolytes

Aashutosh Mistry et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Physical

Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells

Jitti Kasemchainan et al.

NATURE MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Toward a Fundamental Understanding of the Lithium Metal Anode in Solid-State Batteries-An Electrochemo-Mechanical Study on the Garnet-Type Solid Electrolyte Li6.25Al0.25La3Zr3O12

Thorben Krauskopf et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Characterizing the Li-Solid-Electrolyte Interface Dynamics as a Function of Stack Pressure and Current Density

Michael J. Wang et al.

JOULE (2019)

添加到收藏夹

Article Electrochemistry

Impact of External Pressure and Electrolyte Transport Properties on Lithium Dendrite Growth

Pallab Barai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced strength and temperature dependence of mechanical properties of Li at small scales and its implications for Li metal anodes

Chen Xu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

添加到收藏夹

Article Physics, Multidisciplinary

Stability of Electrodeposition at Solid-Solid Interfaces and Implications for Metal Anodes

Zeeshan Ahmad et al.

PHYSICAL REVIEW LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Surface Chemistry Mechanism of Ultra-Low Interfacial Resistance in the Solid-State Electrolyte Li7La3Zr2O12

Asma Sharafi et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

In-situ, non-destructive acoustic characterization of solid state electrolyte cells

Robert D. Schmidt et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coupled glide-climb diffusion-enhanced crystal plasticity

M. G. D. Geers et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Progress and prospective of solid-state lithium batteries

Kazunori Takada

ACTA MATERIALIA (2013)

添加到收藏夹

Article Electrochemistry

The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces

C Monroe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.