Preparation and characterization of calcined Ni/Mo hydrotalcite for the effective removal of lead from wastewater

In this investigation, calcined Ni/Mo hydrotalcite was prepared via co-precipitation method and used as a sorbent for efficient removal of lead from aqueous solutions. The Pb2+ removal efficiency reached 99% at pH 6 and a sorbent dose of 2 g/L. The equilibrium data were satisfactorily fitted by the Langmuir and Hill models with a maximum capacity of 196.87 mg/g, indicating the monolayer sorption for lead over calcined Ni/Mo hydrotalcite. The Pb2+ sorption kinetic follows a pseudo-second-order reaction due to high correlation coefficients (R-2 > 0.99), while the Boyd's plots confirm the external mass transfer as the rate-limiting step in the Pb2+ sorption. The temperature effect indicated a spontaneous and exothermic Pb2+ uptake. Mechanisms involved in the removal process include surface precipitation, diffusion into the solid pores and isomorphic substitution with Ni2+ of the sheets. The results showed excellent selectivity for Pb2+ removal from multi-divalent cation solutions and good reusability of the sorbent for up to 10 consecutive sorption-regeneration cycles without significant loss of the removal efficiency. As an application, the treatment of wastewater containing Pb2+, generated from the battery industry has been undertaken. The Pb2+ concentration was reduced from 5.7 to 0.6 mg/L, corresponding to an abatement of 89.5%. Therefore, the sorption using calcined Ni/Mo hydrotalcite is an efficient and suitable method for the elimination of Pb2+.

Automated summary

In this investigation, calcined Ni/Mo hydrotalcite was prepared and used as an efficient sorbent for removing lead from aqueous solutions. The sorbent showed high removal efficiency of 99% for Pb2+ at a pH of 6 and a sorbent dose of 2 g/L. The sorption process involved surface precipitation, diffusion, and isomorphic substitution.