☆ 4.7 Article

An integrated topology and shape optimization framework for stiffened curved shells by mesh deformation

ENGINEERING WITH COMPUTERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Computer Science, Interdisciplinary Applications

Elite-driven surrogate-assisted CMA-ES algorithm by improved lower confidence bound method

Zengcong Li et al.

Summary: A novel elite-driven surrogate-assisted Covariance Matrix Adaptation Evolution Strategy (ES-CMA-ES) algorithm based on the improved Lower Confidence Bound (ILCB) method is proposed in this paper to relieve computational burden and improve global optimizing ability. By introducing step size to control the uncertainty term of the ILCB formula adaptively, along with an efficient pre-screening strategy and a competitive chaotic operator for model management, ES-CMA-ES achieves efficient candidate point sampling, optimization convergence acceleration, and avoidance of local optima trapping. The proposed algorithm shows outstanding efficiency, global optimizing ability, and applicability compared to other black-box optimization algorithms.

ENGINEERING WITH COMPUTERS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Shape optimization method for axisymmetric disks based on mesh deformation and smoothing approaches

Lei Huang et al.

Summary: This article proposes a shape optimization method for axisymmetric disks based on radial basis function (RBF) mesh deformation and Laplace smoothing approaches. The method uses a greedy algorithm to obtain an optimized reduced control point selection of mesh deformation under the influence of the design space. RBF mesh deformation is used to change the axisymmetric contour shape, and Laplace smoothing is employed to monitor and improve the local mesh quality. The proposed method is validated through two examples in aero-engines, demonstrating its significant potential in reducing the maximum equivalent stress of axisymmetric disks.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2023)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Simultaneous shape and topology optimization of wings

Lukas C. Hoghoj et al.

Summary: This paper presents a method for simultaneous optimization of the outer shape and internal topology of aircraft wings, with the objective of minimizing drag subject to lift and compliance constraints for multiple load cases. The physics are evaluated by the means of a source-doublet panel method for the aerodynamic response and linear elastic finite elements for the structural response, which are one-way coupled. Wings of small fixed-wing airplanes both with and without a stiffening strut are optimized. The resulting wings show internal topologies with struts and wall-truss combinations, depending on the design freedom of the shape optimization. The lift distributions of the optimized wings show patterns like the ones obtained when performing optimization of wing shapes with constraints on the bending moment at the root.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

An explicit approach for simultaneous shape and topology optimization of shell structures

Xudong Jiang et al.

Summary: This study investigates the simultaneous shape and topology optimization of shell structures using the Moving Morphable Component (MMC) approach. Unlike traditional implicit optimization methods, the proposed method is developed in a pure explicit way, which is beneficial for optimizing shell structures with complex geometry. By representing the geometric shape and topological form of the shell using Non-Uniform Rational B-Splines (NURBS) in physical space and a series of components in parametric space, the topology and shape of the shell can be optimized simultaneously with fewer design variables, and the results can be seamlessly integrated with CAD systems. Numerical examples are provided to demonstrate the effectiveness of the proposed method.

APPLIED MATHEMATICAL MODELLING (2023)

添加到收藏夹

Article Engineering, Civil

Efficient buckling analysis and optimization method for rotationally periodic stiffened shells accelerated by Bloch wave method

Kuo Tian et al.

Summary: This paper proposes an efficient buckling analysis and optimization method for rotationally periodic stiffened shells accelerated by the Bloch wave method. The method achieves high prediction accuracy in buckling load and remarkable improvement in modeling and analysis efficiency. It successfully captures both local buckling mode and global buckling mode.

ENGINEERING STRUCTURES (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Stiffener layout optimization framework by isogeometric analysis-based stiffness spreading method

Yu Sun et al.

Summary: An innovative stiffener layout optimization framework is proposed based on the isogeometric analysis-based stiffness spreading method (IGA-based SSM), where the shape and size of stiffeners can be simultaneously optimized. The proposed method provides a clear stiffener layout with a lower computational cost and can easily handle different optimization constraints.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

添加到收藏夹

Article Mechanics

Combined approximation based numerical vibration correlation technique for axially loaded cylindrical shells

Kuo Tian et al.

Summary: This paper introduces the application of numerical VCT (NVCT) in predicting buckling load, presents the NVCT formula for cylindrical shell buckling load, and combines it with the combined approximation (CA) method. The high efficiency and accuracy of CA-NVCT in buckling analysis and optimization are verified through comparison with experimental results and typical numerical methods.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An efficient method for shape and topology optimization of shell structures

Thuan Ho-Nguyen-Tan et al.

Summary: This paper proposes a novel method for shape and topology optimization of shell structures. By utilizing gradient and level set techniques, the method can minimize the compliance of shell structures under volume constraints and obtain optimal designs with clear boundaries.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2022)

添加到收藏夹

Article Computer Science, Artificial Intelligence

On-line transfer learning for multi-fidelity data fusion with ensemble of deep neural networks

Zengcong Li et al.

Summary: In this paper, a novel method called on-line transfer learning based multi-fidelity data fusion (OTL-MFDF) is proposed to improve the prediction accuracy of DNN. The method includes two parts: establishing an ensemble model of DNNs and developing an on-line learning system for adaptive updating. Experimental results demonstrate the effectiveness, global prediction accuracy, and applicability of the OTL-MFDF method.

ADVANCED ENGINEERING INFORMATICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Geometrically nonlinear design of compliant mechanisms: Topology and shape optimization with stress and curvature constraints

Gabriel Stankiewicz et al.

Summary: In this work, a sequential topology and shape optimization framework is used to design compliant mechanisms, focusing on the refined design of flexure hinges through shape optimization in a geometrically nonlinear setting. Enhanced adaptive shape and domain refinement strategies are proposed, along with local stress constraints and a curvature constraint for durability and manufacturability. The novelties of this work include improved adaptive strategies, geometrically nonlinear optimization, and an adapted traction method with curvature constraint.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Adaptive step-size numerical vibration correlation technique for buckling prediction of thin-walled shells under axial compression and thermal loads

Lei Huang et al.

Summary: This paper proposes a numerical prediction method for buckling loads in shell structures under axial compression and thermal loads based on vibration correlation technique (VCT). The method, named numerical VCT (NVCT), is a non-destructive test method that can be realized numerically. The paper presents the derivation of the VCT formula for thin-walled structures and introduces an adaptive step-size NVCT (AS-NVCT) calculation scheme based on an adaptive increment control strategy. The findings demonstrate that AS-NVCT achieves accurate buckling prediction results and higher efficiency compared to typical numerical buckling methods.

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2022)

添加到收藏夹

Article Engineering, Aerospace

A data-driven modelling and optimization framework for variable-thickness integrally stiffened shells

Hongqing Li et al.

Summary: A novel data-driven modeling and optimization framework is proposed for the variable-thickness integrally stiffened shell, achieving satisfactory results in the case study through new mesh deformation method and deep neural network approach.

AEROSPACE SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Multi-fidelity deep neural network surrogate model for aerodynamic shape optimization

Xinshuai Zhang et al.

Summary: The study establishes an effective optimization framework of aerodynamic shape design based on the multi-fidelity deep neural network (MFDNN) model, achieving high accuracy by blending different fidelity information. The proposed framework significantly improves optimization efficiency and outperforms single-fidelity methods.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Transfer learning based variable-fidelity surrogate model for shell buckling prediction

Kuo Tian et al.

Summary: This paper proposes a novel establishment method of the variable-fidelity surrogate model driven by transfer learning for shell buckling prediction problems, aiming to achieve higher prediction accuracy. The TL-VFSM is constructed through two steps and verified by engineering examples for its effectiveness and efficiency.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Self-supporting structure design with feature-driven optimization approach for additive manufacturing

Lu Zhou et al.

Summary: This work develops a topology optimization approach for additive manufacturing of self-supporting structures, addressing overhang angle control, avoidance of V-shaped areas, and minimum length scale control. By introducing 2D and 3D design primitives for topological changes, the effectiveness of the proposed approach is demonstrated through numerical examples in various build directions, critical overhang angles, and minimum length scales.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Aerospace

Efficient Mesh Generation and Deformation for Aerodynamic Shape Optimization

Ney R. Secco et al.

Summary: The paper presents an efficient approach for generating high-quality structured meshes in a semi-automatic manner, along with a flexible mesh deformation method and an efficient approach for computing mesh deformation derivatives. The proposed approaches are evaluated for speed, scalability, and robustness, showing fast speed, strong scalability, and good robustness.

AIAA JOURNAL (2021)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Accelerating Large-scale Topology Optimization: State-of-the-Art and Challenges

Sougata Mukherjee et al.

Summary: Large-scale structural topology optimization has been constrained by high computational costs, primarily due to solving Finite Element equations and the need for fine 3D models for accurate simulation. In recent years, there have been promising techniques to accelerate the optimization process, such as re-analysis, multi-grid solvers, model reduction, machine learning, and high-performance computing.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Topology optimization of self-supporting structures for additive manufacturing with B-spline parameterization

Che Wang et al.

Summary: This paper presents a B-spline based topology optimization method to design self-supporting structures for additive manufacturing, which effectively controls overhang using B-spline parameterization and Heaviside function. The proposed method is demonstrated to be independent of the FE mesh and works well with free-form design domains.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Stiffener layout optimization of shell structures with B-spline parameterization method

Shengqi Feng et al.

Summary: This paper presents an effective B-spline parameterization method for stiffener layout optimization of thin-walled shell structures, generating a continuous height field matching the characteristics of the shell structure. The finite element method is used for structural analysis, and compared with the standard method, the proposed method can produce checkerboard-free design results.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Simultaneous optimization of topology and layout of modular stiffeners on shells and plates

Coen Bakker et al.

Summary: This study focuses on optimizing the topology and layout of stiffened shells and plates by introducing modular design and density-based topology optimization. The method is able to generate clear topologies for any number of modules, demonstrating distinct layouts of stiffeners on the base shell or plate.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Engineering, Civil

Accelerated optimization of curvilinearly stiffened panels using deep learning

Karanpreet Singh et al.

Summary: The aerospace industry aims to design robust and fuel efficient structures, utilizing advanced manufacturing techniques like additive manufacturing. Approximating FEA buckling response can accelerate the optimization process, with trained DNN achieving 95% accuracy on the test set.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A unified simultaneous shape and topology optimization method for multi-material laminated shell structures

Masatoshi Shimoda et al.

Summary: This paper proposes a simultaneous shape and topology optimization method for designing multi-material structures. The method effectively combines shape and topology optimization by using shape along with fictitious homogenized-density variations as design variables. The proposed method allows for obtaining an optimal multi-material laminated shell structure without the need for design parameterization, eliminating numerical instabilities such as checkerboard pattern and zigzag shape problems.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A component-based method for the optimization of stiffener layout on large cylindrical rib-stiffened shell structures

Florent Savine et al.

Summary: This study proposes an optimization method for producing innovative stiffening layouts for large stiffened cylindrical shell structures in the aerospace industry. The method applies component-based logic on a ground mesh to control sets of beam elements for evaluating optimization objectives and constraints.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Coupled topology and shape optimization using an embedding domain discretization method

Gabriel Stankiewicz et al.

Summary: In this work, density-based topology optimization and node-based shape optimization are combined into a single optimization problem using an embedding domain discretization technique. The use of a variable pseudo-density field allows for the design of fine-tuned structures without predefined topological features. Through this approach, the advantages of both topology and shape optimization methods are brought together to provide an efficient way to generate production-ready designs.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

AuTO: a framework for Automatic differentiation in Topology Optimization

Aaditya Chandrasekhar et al.

Summary: This paper introduces the use of automatic differentiation (AD) for computing sensitivities in topology optimization (TO) problems. The framework called AuTO, implemented using the high-performance Python library JAX, is illustrated through several examples in compliance minimization, compliant mechanism design, and microstructural design.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Toward the robust establishment of variable-fidelity surrogate models for hierarchical stiffened shells by two-step adaptive updating approach

Kuo Tian et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Hole seeding in level set topology optimization via density fields

Jorge L. Barrera et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

CAD-compatible structural shape optimization with a movable Bezier tetrahedral mesh

Jorge Lopez et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Imposing minimum and maximum member size, minimum cavity size, and minimum separation distance between solid members in topology optimization

Eduardo Fernandez et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Novel implementation of extrusion constraint in topology optimization by Helmholtz-type anisotropic filter

Bo Wang et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Data-driven modelling and optimization of stiffeners on undevelopable curved surfaces

Kuo Tian et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

添加到收藏夹

Article Engineering, Civil

Two-scale buckling topology optimization for grid-stiffened cylindrical shells

Yan Zhou et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Computer Science, Information Systems

Pymoo: Multi-Objective Optimization in Python

Julian Blank et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiscale topology optimization using neural network surrogate models

Daniel A. White et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Explicit level set and density methods for topology optimization with equivalent minimum length scale constraints

Miche Jansen

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Topology optimization of self-supporting structures with polygon features for additive manufacturing

Weihong Zhang et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)

添加到收藏夹

Article Engineering, Civil

Tailoring the optimal load-carrying efficiency of hierarchical stiffened shells by competitive sampling

Kuo Tian et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Engineering, Industrial

Topology optimization of stiffened plate/shell structures based on adaptive morphogenesis algorithm

Honglei Liu et al.

JOURNAL OF MANUFACTURING SYSTEMS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Giga-voxel computational morphogenesis for structural design

Niels Aage et al.

NATURE (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Applications of automatic differentiation in topology optimization

Sebastian A. Norgaard et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)

添加到收藏夹

Article Engineering, Aerospace

Influences of shield ratio on the infrared signature of serpentine nozzle

Wen Cheng et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Mechanics

Fundamental frequency maximization of orthotropic shells using a free-form optimization method

Jin-Xing Shi et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Topology optimization with manufacturing constraints: A unified projection-based approach

Sandro L. Vatanabe et al.

ADVANCES IN ENGINEERING SOFTWARE (2016)

添加到收藏夹

Article Engineering, Aerospace

Improved Point Selection Method for Hybrid-Unstructured Mesh Deformation Using Radial Basis Functions

Gang Wang et al.

AIAA JOURNAL (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

A staggered approach to shape and topology optimization using the traction method and an evolutionary-type advancing front algorithm

Stefan Riehl et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Non-parametric shape optimization method for natural vibration design of stiffened shells

Yang Liu et al.

COMPUTERS & STRUCTURES (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

H-DGTP-a Heaviside-function based directional growth topology parameterization for design optimization of stiffener layout and height of thin-walled structures

Shutian Liu et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2015)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Aerodynamic Shape Optimization in Aeronautics: A Fast and Effective Multi-Objective Approach

Claudio Comis Da Ronco et al.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2014)

添加到收藏夹

Article Construction & Building Technology

Buckling of stiffened curved panels under uniform axial compression

K. L. Tran et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Buckling resistance of grid-stiffened carbon-fiber thin-shell structures

Shanshan Shi et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Filters in topology optimization based on Helmholtz-type differential equations

B. S. Lazarov et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Shape optimization of shell structures based on NURBS description using automatic differentiation

L. F. R. Espath et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A level set based method for the optimization of cast part

Qi Xia et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2010)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Efficient mesh motion using radial basis functions with data reduction algorithms

T. C. S. Rendall et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2009)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Imposing maximum length scale in topology optimization

James K. Guest

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2009)

添加到收藏夹

Article Engineering, Multidisciplinary

Isogeometric structural shape optimization

Wolfgang A. Wall et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2008)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Mesh deformation using radial basis functions for gradient-based aerodynamic shape optimization

S. Jakobsson et al.

COMPUTERS & FLUIDS (2007)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Mesh deformation based on radial basis function interpolation

A. de Boer et al.

COMPUTERS & STRUCTURES (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

Adaptive growth technique of stiffener layout pattern for plate and shell structures to achieve minimum compliance

XH Ding et al.

ENGINEERING OPTIMIZATION (2005)

添加到收藏夹

Article Engineering, Multidisciplinary

Achieving minimum length scale in topology optimization using nodal design variables and projection functions

JK Guest et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Combined shape and reinforcement layout optimization of shell structures

R Ansola et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2004)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An integrated approach for shape and topology optimization of shell structures

R Ansola et al.

COMPUTERS & STRUCTURES (2002)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Integration of topology and shape optimization for design of structural components

PS Tang et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2001)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics

GIN Rozvany

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2001)

添加到收藏夹

Article Operations Research & Management Science

A taxonomy of global optimization methods based on response surfaces

DR Jones

JOURNAL OF GLOBAL OPTIMIZATION (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.