☆ 4.7 Article

An IFS-based fractal discrete fracture network for hydraulic fracture behavior of rock mass

ENGINEERING GEOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Computer Science, Interdisciplinary Applications

A Review of Hydraulic Fracturing Simulation

Bin Chen et al.

Summary: This paper discusses the physical processes, numerical models, and commercial software related to hydraulic fracturing, analyzing their effects and highlighting pros and cons. Based on these discussions, recommendations for further research are provided.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Study on the effect of cemented natural fractures on hydraulic fracture propagation in volcanic reservoirs

Zhaoyi Liu et al.

Summary: The study focused on the influence of typical fracture characteristics of volcanic rocks on hydraulic fracturing through numerical research and verification based on indoor tests and simulations. The results indicated that a decrease in the cementation strength ratio leads to an increase in hydraulic fracture propagation rate, with the cementation strength and morphology of NFs significantly affecting the propagation direction of HFs.

ENERGY (2022)

添加到收藏夹

Article Engineering, Geological

An integrated UAV photogrammetry-discrete element investigation of jointed Triassic sandstone near Sydney, Australia

Zack Tuckey

Summary: In the past decade, UAV Structure-from-Motion photogrammetry and digital rock mass mapping tools have been widely used in geotechnical engineering. This study presents a case study that applies UAV photogrammetry mapping, discrete fracture network analysis, and discrete element method modeling to investigate rock mass geomechanical characteristics. The results demonstrate the effectiveness and accuracy of these digital mapping and numerical modeling approaches.

ENGINEERING GEOLOGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Rough Discrete Fracture Network Model for Geometrical Modeling of Jointed Rock Masses and the Anisotropic Behaviour

Peitao Wang et al.

Summary: This paper proposes a rough discrete fractures network (RDFN) characterization method based on the Fourier transform method. By changing the different Fourier series values, the unified characterization of the complex geometric fracture network is achieved. The study findings suggest that the geometry of the joint network significantly influences the strength and failure modes of jointed rock masses, and the orientation of the fracture sets plays a crucial role in the failure modes of opening.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Engineering, Geological

Multi-scale Coupled Processes Modeling of Fractures as Porous, Interfacial and Granular Systems from Rock Images with the Numerical Manifold Method

Mengsu Hu et al.

Summary: This study presents multi-scale modeling capabilities developed based on the numerical manifold method for analyzing coupled hydro-mechanical processes in fractured rocks. Fractures are modeled as continua-finite-thickness porous zones, discontinua-discontinuous interfaces, and microscale asperities and granular systems based on their geometric features. The simulations demonstrate the significant contribution of contact dynamics to geometric, multi-physical evolution in rough fractures systems.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

添加到收藏夹

Article Engineering, Geological

Can we infer the percolation status of 3D fractured media from 2D outcrops?

Weiwei Zhu et al.

Summary: This study investigates the fluid flow in underground fractures by examining their three-dimensional structure and two-dimensional cross-section maps. 3D fracture networks with different geometries are constructed, and their connectivity is analyzed using labeled clusters on cross-section maps. The study reveals that clustering effects have a significant impact on local intersections, but negligible effects on fracture intensities of 3D fracture networks. Empirical limits are provided to predict the fracture intensity and connectivity based on outcrop maps.

ENGINEERING GEOLOGY (2022)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of the impact of fracture aperture anisotropy on EGS thermal performance

Esuru Rita Okoroafor et al.

Summary: The impact of anisotropy within spatially-varying fracture apertures on heat transfer in Enhanced Geothermal Systems was investigated. The results showed that the perpendicular flow configuration had favorable thermal performance in 70% of the fracture aperture distributions studied. The study also found that flow-wetted surface area and volumetric flow through preferential paths contributed significantly to heat extraction.

GEOTHERMICS (2022)

添加到收藏夹

Article Engineering, Geological

Development and verification of three-dimensional equivalent discrete fracture network modelling based on the finite element method

Na Wu et al.

Summary: The discrete fracture network (DFN) method is essential for estimating the mechanical properties of naturally fractured rock masses. Through the combination of a three-dimensional (3D) equivalent DFN model and fracture geometry information, the strength and deformability of complex fractured rock masses can be effectively investigated.

ENGINEERING GEOLOGY (2022)

添加到收藏夹

Article Engineering, Geological

Efficient partitioning of conforming virtual element discretizations for large scale discrete fracture network flow parallel solvers

Stefano Berrone et al.

Summary: In this paper, we propose and compare DFN-based partitioning strategies for discrete fracture network models in large scale geological flow simulations. The results show that these strategies are highly efficient and scalable in distributing fractures and solving linear systems.

ENGINEERING GEOLOGY (2022)

添加到收藏夹

Article Engineering, Geological

Experimental study on permeability evolution and nonlinear seepage characteristics of fractured rock in coupled thermo-hydraulic-mechanical environment:a case study of the sedimentary rock in Xishan area

Tao Meng et al.

Summary: This paper investigates the evolution of fracture permeability and aperture in a coupled THM environment, analyzing the variations with temperature and triaxial stress. The findings can offer theoretical guidance for assessing the stability of high-temperature underground excavations.

ENGINEERING GEOLOGY (2021)

添加到收藏夹

Article Engineering, Geological

Experiments and analysis on the influence of multiple closed cemented natural fractures on hydraulic fracture propagation in a tight sandstone reservoir

Jun Zhang et al.

Summary: This study investigates the impact of closed cemented natural fractures on the propagation behavior of hydraulic fracture in tight sandstone formations through tri-axial hydraulic fracturing experiments. Four types of interactions between hydraulic fractures and closed cemented pre-existing fractures were identified. The most complicated interaction is observed when the angle between the maximum principal horizontal stress direction and closed cemented pre-existing fracture network is between 30 to 60 degrees.

ENGINEERING GEOLOGY (2021)

添加到收藏夹

Article Engineering, Geological

A new combined analytical-numerical method for evaluating the inflow rate into a tunnel excavated in a fractured rock mass

Alireza Shahbazi et al.

Summary: A new method is developed to evaluate the inflow rate to an underground tunnel excavated in a fractured rock mass, combining analytical and numerical tools. The method uses analytical formulas based on Darcy's and Cubic laws, considering discontinuities as main pathways for groundwater flow to calculate effective parameters for groundwater inflow rate.

ENGINEERING GEOLOGY (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Numerical simulation of forerunning fracture in saturated porous solids with hybrid FEM/Peridynamic model

Tao Ni et al.

Summary: This paper utilizes a novel hybrid FEM and Peridynamic modeling approach to predict the dynamic solution of hydro-mechanical coupled problems. Validation is done through a one-dimensional dynamic consolidation problem and convergence studies, followed by simulations of dynamic fracturing under different loading conditions.

COMPUTERS AND GEOTECHNICS (2021)

添加到收藏夹

Article Computer Science, Software Engineering

Neper2CAE and PyCiGen: Scripts to generate polycrystals and interface elements in Abaqus

Nicolo Grilli et al.

Summary: The two developed codes enable easy intergranular fracture simulations in Abaqus, as well as the automatic creation of different grain structures to reproduce sample-to-sample variability observed in experiments. These scripts extend the simulation capabilities of the finite element solver Abaqus.

SOFTWAREX (2021)

添加到收藏夹

Article Engineering, Geological

Fluid-driven transition from damage to fracture in anisotropic porous media: a multi-scale XFEM approach

Wencheng Jin et al.

ACTA GEOTECHNICA (2020)

添加到收藏夹

Article Engineering, Geological

On the hydraulic fracturing in naturally-layered porous media using the phase field method

Xiaoying Zhuang et al.

ENGINEERING GEOLOGY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Hybrid FEM and peridynamic simulation of hydraulic fracture propagation in saturated porous media

Tao Ni et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Mechanics

An NMM-based fluid-solid coupling model for simulating rock hydraulic fracturing process

Gen Li et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Research on Shear Behavior and Crack Evolution of Symmetrical Discontinuous Rock Joints Based on FEM-CZM

Xianlong Wu et al.

SYMMETRY-BASEL (2020)

添加到收藏夹

Article Geosciences, Multidisciplinary

Dynamic calibration of the Shaikan Jurassic full-field fractured reservoir model through single-well DST and multi-well interference discrete fracture network simulation

Neil Price et al.

JOURNAL OF THE GEOLOGICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional Combined Finite-Discrete Element Modeling of Shear Fracture Process in Direct Shearing of Rough Concrete-Rock Joints

Gyeongjo Min et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Geological

Coupled flow network and discrete element modeling of injection-induced crack propagation and coalescence in brittle rock

Guang Liu et al.

ACTA GEOTECHNICA (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Phase-field modeling of fluid-driven dynamic cracking in porous media

Shuwei Zhou et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

DEM modeling of hydraulic fracturing in permeable rock: influence of viscosity, injection rate and in situ states

Kang Duan et al.

ACTA GEOTECHNICA (2018)

添加到收藏夹

Article Engineering, Marine

A method for simplifying ship trajectory based on improved Douglas-Peucker algorithm

Liangbin Zhao et al.

OCEAN ENGINEERING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Finite element simulation of the micromachining of nanosized-silicon-carbide-particle reinforced composite materials based on the cohesive zone model

Hongmin Pen et al.

NANOTECHNOLOGY AND PRECISION ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

Modelling hydraulic fractures in porous media using flow cohesive interface elements

Vinh Phu Nguyen et al.

ENGINEERING GEOLOGY (2017)

添加到收藏夹

Article Mechanics

A phase-field modeling approach of hydraulic fracture in saturated porous media

Y. Heider et al.

MECHANICS RESEARCH COMMUNICATIONS (2017)

添加到收藏夹

Article Physics, Multidisciplinary

XFEM modeling of hydraulic fracture in porous rocks with natural fractures

Tao Wang et al.

SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Investigation on jointed rock strength based on fractal theory

Yang Lan-lan et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

FDEM-flow3D: A 3D hydro-mechanical coupled model considering the pore seepage of rock matrix for simulating three-dimensional hydraulic fracturing

Chengzeng Yan et al.

COMPUTERS AND GEOTECHNICS (2017)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

The use of discrete fracture networks for modelling coupled geomechanical and hydrological behaviour of fractured rocks

Qinghua Lei et al.

COMPUTERS AND GEOTECHNICS (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A 2D, fully-coupled, hydro-mechanical, FDEM formulation for modelling fracturing processes in discontinuous, porous rock masses

A. Lisjak et al.

COMPUTERS AND GEOTECHNICS (2017)

添加到收藏夹

Article Engineering, Geological

Combined Finite-Discrete Element Method for Simulation of Hydraulic Fracturing

Chengzeng Yan et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Hydraulic fracturing modeling using the discontinuous deformation analysis (DDA) method

Ling Qian Choo et al.

COMPUTERS AND GEOTECHNICS (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Application of distinct element methods to simulation of hydraulic fracturing in naturally fractured reservoirs

Branko Damjanac et al.

COMPUTERS AND GEOTECHNICS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase-field modeling of hydraulic fracture

Zachary A. Wilson et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)

添加到收藏夹

Article Water Resources

Two-phase flow properties of a horizontal fracture: The effect of aperture distribution

Zuyang Ye et al.

ADVANCES IN WATER RESOURCES (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Simulation of hydraulic fracture utilizing numerical manifold method

Zhang GuoXin et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2015)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Mesoscale modelling of crack-induced diffusivity in concrete

Filip Nilenius et al.

COMPUTATIONAL MECHANICS (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An open source program to generate zero-thickness cohesive interface elements

Vinh Phu Nguyen

ADVANCES IN ENGINEERING SOFTWARE (2014)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Investigation of natural rock joint roughness

Yunfeng Ge et al.

COMPUTERS AND GEOTECHNICS (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Coupling schemes for modeling hydraulic fracture propagation using the XFEM

Elizaveta Gordeliy et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)

添加到收藏夹

Article Geosciences, Multidisciplinary

The RANSAC Method for Generating Fracture Networks from Micro-seismic Event Data

Younes Fadakar Alghalandis et al.

MATHEMATICAL GEOSCIENCES (2013)

添加到收藏夹

Article Mechanics

Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model

Benoit Carrier et al.

ENGINEERING FRACTURE MECHANICS (2012)

添加到收藏夹

Article Geochemistry & Geophysics

Mechanics of fluid-driven fracture growth in naturally fractured reservoirs with simple network geometries

Xi Zhang et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2009)

添加到收藏夹

Article Engineering, Multidisciplinary

An extended finite element method for hydraulic fracture problems

Brice Lecampion

COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING (2009)

添加到收藏夹

Article Environmental Sciences

A comparative simulation study of coupled THM processes and their effect on fractured rock permeability around nuclear waste repositories

Jonny Rutqvist et al.

ENVIRONMENTAL GEOLOGY (2009)

添加到收藏夹

Article Engineering, Geological

Coupled HM analysis using zero-thickness interface elements with double nodes. Part I: Theoretical model

J. M. Segura et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2008)

添加到收藏夹

Article Engineering, Geological

Analysis of thermally induced changes in fractured rock permeability during 8 years of heating and cooling at the Yucca Mountain Drift Scale Test

J. Rutqvist et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)

添加到收藏夹

Article Engineering, Geological

Coupled thermal-hydrological-mechanical analyses of the Yucca Mountain Drift Scale Test - Comparison of field measurements to predictions of four different numerical models

J Rutqvist et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2005)

添加到收藏夹

Article Environmental Sciences

Evaluation of cubic law based models describing single-phase flow through a rough-walled fracture

JS Konzuk et al.

WATER RESOURCES RESEARCH (2004)

添加到收藏夹

Article Energy & Fuels

Estimation of tortuosity of fluid flow through a single fracture

S Murata et al.

JOURNAL OF CANADIAN PETROLEUM TECHNOLOGY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.