☆ 4.7 Article

Fracture behavior and energy efficiency of silica under a tensile load using molecular dynamics

ENGINEERING FRACTURE MECHANICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

A Review on the Modeling of the Elastic Modulus and Yield Stress of Polymers and Polymer Nanocomposites: Effect of Temperature, Loading Rate and Porosity

Reema H. Alasfar et al.

Summary: Porous polymer-based nanocomposites are widely used due to their advantages such as multi-functionalities, easy manufacturability, and low cost. Understanding the mechanical properties of these materials is crucial for their applications and efficiency. This review paper focuses on the modeling of the mechanical properties of porous polymer-based nanocomposites, including the effects of loading rates, operational temperatures, and porosity. Experimental techniques and applications are also discussed.

POLYMERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical behavior of polycrystals: Coupled in situ DIC-EBSD analysis of pure copper under tensile test

J. P. Goulmy et al.

Summary: Understanding the mechanisms at the microstructure scale is crucial for modeling material behavior. This study explores the use of high resolution digital image correlation (HRDIC) combined with in situ Scanning Electron Microscope (SEM) tests to establish a connection between polycrystalline modeling and experiment. The tensile behavior of a pure copper polycrystal is evaluated using HRDIC, and the impact of grain orientation on mechanical behavior is discussed through EBSD analysis.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Engineering, Mechanical

In-situ investigation on tensile properties of a novel Ti/Al composite sheet

Zhou Li et al.

Summary: This study investigated the tensile properties, microstructural evolution, and deformation behaviors of a new explosive welded TA1/5083 composite sheet, revealing the formation of a wavy transition zone, predominant occurrence of slip bands on the 5083 side, and significant increase in dislocation density in the 5083 layer.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

In-situ TEM observation of the ITB evolution in aluminum deformation twinning

Kang Yan et al.

Summary: Deformation twinning is an important phenomenon in the plastic deformation of metals and alloys, alongside dislocation slip. In this study, the plastic deformation behavior of coarse-grained aluminum with high stacking fault energy was investigated using in-situ tensile TEM. The findings reveal that deformation twins occur at the crack tip under continuous applied stress, with the thickness of deformation twin increasing as incoherent twin boundaries (ITBs) appear. Analysis shows that Frank partial dislocation in deformation twins decompose into perfect dislocation and Shockley partial dislocation under applied stress. These dislocations slip along crystal planes and react to form dislocation combinations that constitute the ITBs. The results provide researchers with a new perspective on the role of ITBs in deformation twinning and the formation of dislocation combinations in ITBs.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Study on Determination Method of Rock Tensile Modulus of Brazilian Disc Splitting Test Based on Digital Speckle Correlation Method (DSCM)

Tongbin Zhao et al.

Summary: The study on split rocks revealed that the tensile modulus goes through three stages: rapid increase, slow increase, and steady increase. The impact of vertical load and lateral displacement on the tensile modulus varies in different stages.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Engineering, Chemical

Effect of feed quantity on breakage degree of ore particles subjected to high voltage pulses

Binglei Li et al.

Summary: The effect of feed sample spatial arrangement on the breakage degree of high voltage pulse breakage (HVPB) product was investigated, with results indicating that the fineness of HVPB product increases with feed quantity while the pre-weakening degree decreases. A new index of equivalent product fineness was introduced to represent the overall breakage degree, showing a positive correlation with feed quantity.

MINERALS ENGINEERING (2021)

添加到收藏夹

Article Engineering, Chemical

Historical perspective and bibliometric analysis of molecular modeling applied in mineral flotation systems

Lucas A. Silva et al.

Summary: The review highlights China as the main contributor to international peer-reviewed literature on molecular modeling in mineral flotation systems studies. The research mainly focuses on minerals such as iron and aluminum, with an emphasis on evaluation and development of flotation collectors. Despite significant progress, further advancements in methodology and computational methods are still necessary.

MINERALS ENGINEERING (2021)

添加到收藏夹

Article Geochemistry & Geophysics

Investigation of thermal properties of crystalline alpha quartz by employing different interatomic potentials: A molecular dynamic study

Fatemeh Molaei et al.

Summary: The thermal properties of crystalline alpha-quartz were studied using NEMD simulation method, showing that thermal conductivities calculated using ReaxFF and BKS force fields are more accurate and exhibit better agreement with experimental values at higher temperatures. Additionally, Tersoff and SW force fields corroborated experimental findings for thermal expansion coefficient (TEC) and showed smaller magnitude of TEC in the z direction.

PHYSICS OF THE EARTH AND PLANETARY INTERIORS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of Domain Size, Boundary, and Loading Conditions on Mechanical Properties of Amorphous Silica: A Reactive Molecular Dynamics Study

Truong Vo et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Engineering, Chemical

Size-energy relationship exponents in comminution

Sudarshan Martins

MINERALS ENGINEERING (2020)

添加到收藏夹

Article Engineering, Chemical

Enhancement of gold agitation leaching by HPGR comminution via microstructural modification of gold ore particles

Yuan Tang et al.

MINERALS ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

Comparison of breakage behavior between the sieving crusher and ordinary teeth roll crushers

Baoqiang Wang et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)

添加到收藏夹

Article Mechanics

Effects of surface crack on the mechanical properties of Silica: A molecular dynamics simulation study

Sanjib C. Chowdhury et al.

ENGINEERING FRACTURE MECHANICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of water on the mechanical properties of silica glass using molecular dynamics

Hai Mei et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Acoustics

Ultrasonically assisted drilling in marble

N. Mikhailova et al.

JOURNAL OF SOUND AND VIBRATION (2019)

添加到收藏夹

Article Chemistry, Physical

Atomistic uniaxial tension tests: investigating various many-body potentials for their ability to produce accurate stress strain curves using molecular dynamics simulations

Liam S. Morrissey et al.

MOLECULAR SIMULATION (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Point defects production and energy thresholds for displacements in crystalline and amorphous SiC

Benjamin J. Cowen et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

添加到收藏夹

Article Geochemistry & Geophysics

Chemical Effects on Subcritical Fracture in Silica From Molecular Dynamics Simulations

Jessica M. Rimsza et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2018)

添加到收藏夹

Article Engineering, Chemical

Dynamics in double roll crushers

Holger Lieberwirth et al.

MINERALS ENGINEERING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fracture surface energy and toughness of inorganic glasses

Tanguy Rouxel

SCRIPTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Molecular dynamics simulations of the structure and mechanical properties of silica glass using ReaxFF

Sanjib C. Chowdhury et al.

JOURNAL OF MATERIALS SCIENCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Atomic scale modeling of shock response of fused silica and α-quartz

J. Wang et al.

JOURNAL OF MATERIALS SCIENCE (2015)

添加到收藏夹

Article Materials Science, Ceramics

Fracture toughness of calcium-silicate-hydrate from molecular dynamics simulations

M. Bauchy et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)

添加到收藏夹

Article Chemistry, Physical

A reactive molecular dynamics simulation of the silica-water interface

Joseph C. Fogarty et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evolution of nanoscale defects to planar cracks in a brittle solid

Ashfaq Adnan et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

添加到收藏夹

Article Mineralogy

Chemistry, textures and physical properties of quartz - geological interpretation and technical application

J. Goetze

MINERALOGICAL MAGAZINE (2009)

添加到收藏夹

Article Engineering, Chemical

Mineral comminution: Energy efficiency considerations

Desmond Tromans

MINERALS ENGINEERING (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interatomic potential for Si-O systems using Tersoff parameterization

Shinji Munetoh et al.

COMPUTATIONAL MATERIALS SCIENCE (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoscale damage during fracture in silica glass

D. Bonamy et al.

INTERNATIONAL JOURNAL OF FRACTURE (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Temperature variation of elastic constants of quartz across the α-β transition

I Ohno et al.

PHYSICS AND CHEMISTRY OF MINERALS (2006)

添加到收藏夹

Article Engineering, Chemical

Size reduction by means of low-speed rotary shears

D Woldt et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2004)

添加到收藏夹

Review Materials Science, Multidisciplinary

Fracture and deformation in brittle solids: A perspective on the issue of scale

BR Lawn

JOURNAL OF MATERIALS RESEARCH (2004)

添加到收藏夹

Article Engineering, Chemical

The energy efficiency of ball milling in comminution

DW Fuerstenau et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.