Root cause analysis of flywheel gear failure in a marine diesel engine

Engine gear failures are of significant concern across a wide range of industries. It is important to investigate each gear failure in light of its unique loading and operating conditions for root cause analysis (RCA) and further corrective actions to avoid such failures in the future. The aim of this study was to investigate the premature failure of a flywheel gear of a marine diesel engine and establish the root cause and damage mechanisms using experimental and numerical analysis techniques. A bottom-up creative approach was adopted to assess the loading conditions on the failed gear by first estimating the bending deformation of the failed securing bolt, assuming overload torque on the flywheel caused an equivalent bending moment permanently bending the bolt. Von Mises equivalent stress acting on the gear was numerically estimated as sigma VM = 737 MPa, which was found significantly more than the specified yield strength of gear governing material AISI 1055 (sigma Y = 550 MPa). SEM fractography revealed a quasi-cleavage failure mechanism in the 'case' region near the gear root and a ductile failure mechanism inside the 'core' region of the flywheel gear. A crack was found to initiate from the gear root consisting of high-stress concentration under overload stresses. RCA established that the flywheel gears had failed by overload stresses, caused due to overload torque generated from sudden inertial thrust in the internal combustion (IC) engine due to excess fuel throttle opening.

Automated summary

Engine gear failures are a significant concern in various industries. Investigating each gear failure and determining the root cause is important for preventing future failures. This study used experimental and numerical analysis techniques to investigate the premature failure of a flywheel gear in a marine diesel engine. The findings revealed that the gear failed due to overload stresses caused by overload torque generated from sudden inertial thrust in the internal combustionengine.