相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Fracture toughness evaluation of 1.4841 bolt subjected to simultaneous effects of creep and hydrogen embrittlement phenomena using small punch test: A case study in a superheater of a petrochemical unit
G. H. Farrahi et al.
ENGINEERING FAILURE ANALYSIS (2023)
Feasibility assessment of local repairment for reformer furnace tubes in service exposure
Cheng-ming Fuyang et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2020)
Aging Phenomena during In-Service Creep Exposure of Heat-Resistant Steels
G. N. Haidemenopoulos et al.
METALS (2019)
Evaluation of the ductile-brittle transition temperature of anisotropic materials by small punch test with un-notched and U-notched specimens
Kaishu Guan et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Degradation and reduction of small punch creep life of service-exposed Super304H steel
Thi Giang Le et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2019)
Determination of fracture toughness from the small punch test using circular notched specimens
Roger Hurst et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Creep characteristics and deformation analysis of service-exposed material using small punch creep test
Sisheng Yang et al.
ENGINEERING FRACTURE MECHANICS (2018)
Estimation of yield and ultimate stress using the small punch test method applied to non-standard specimens: A computational study validated by experiments
E. Priel et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
A new method based on energy principle to predict uniaxial stress-strain relations of ductile materials by small punch testing
Yun-qiang Peng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
On the estimation of ultimate tensile stress from small punch testing
E. Altstadt et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Heat affected zone creep characterization of INCOLOY 800H by means of small punch test
M. Nafari et al.
ENGINEERING FAILURE ANALYSIS (2018)
The Relationship Between Magnetism and Microstructure of Ethylene Pyrolysis Furnace Tubes after a Long-term Service
Jingfeng Guo et al.
MICROSCOPY AND MICROANALYSIS (2018)
Microstructural analysis of Cr35Ni45Nb heat-resistant steel after a five-year service in pyrolysis furnace
Jingfeng Guo et al.
ENGINEERING FAILURE ANALYSIS (2017)
Creep life prediction of small punch creep testing specimens for service-exposed Cr5Mo using the theta-projection method
Yangyan Zheng et al.
ENGINEERING FAILURE ANALYSIS (2017)
Estimation of residual stresses by inverse analysis based on experimental data from sample removal for small punch tests
V. Buljak et al.
ENGINEERING STRUCTURES (2017)
Improved correlation for elastic modulus prediction of metallic materials in the Small Punch Test
Jose Calaf Chica et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
On the determination of the ductile to brittle transition temperature from small punch tests on Grade 91 ferritic-martensitic steel
M. Bruchhausen et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2017)
Numerical development of a new correlation between biaxial fracture strain and material fracture toughness for small punch test
Pradeep Kumar et al.
JOURNAL OF NUCLEAR MATERIALS (2017)
Creep behaviors evaluation of Incoloy800H by small punch creep test
Sisheng Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Study on Temper Embrittlement and Hydrogen Embrittlement of a Hydrogenation Reactor by Small Punch Test
Kaishu Guan et al.
MATERIALS (2017)
Fragmented structure of niobium carbide particles in as-cast modified HP alloys
Sergey Yu. Kondrat'ev et al.
ACTA MATERIALIA (2017)
Small punch test evaluation methods for material characterisation
Adam Janca et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Recent developments in small punch testing: Tensile properties and DBTT
M. Bruchhausen et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Microstructure and Carburization Detection in HP Alloy Pyrolysis Tubes
A. C. McLeod et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2015)
Estimation of the mechanical properties of metallic materials by means of the small punch test
T. E. Garcia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Determination of creep properties of a P91 weldment by small punch testing and a new evaluation approach
B. Gulcimen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of geometric factors and processing parameters on plastic damage of SUS304 stainless steel by small punch test
Sisheng Yang et al.
MATERIALS & DESIGN (2012)
Assessment of toughness in long term service CrMo low alloy steel by fracture toughness and small punch test
Kaishu Guan et al.
NUCLEAR ENGINEERING AND DESIGN (2011)
A study on influence factors of small punch creep test by experimental investigation and finite element analysis
Zhixiang Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Usage of the small-punch-test for the characterisation of reactor vessel steels in the brittle-ductile transition region
T. Linse et al.
ENGINEERING FRACTURE MECHANICS (2008)
3D analysis of creep voids in hydrogen reformer tubes
AA Wahab et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Analysis of failed ethylene cracking tubes
KS Guan et al.
ENGINEERING FAILURE ANALYSIS (2005)
Quantitative study of creep cavity area of HP40 furnace tubes
KS Guan et al.
NUCLEAR ENGINEERING AND DESIGN (2005)
Typical failures in pyrolysis coils for ethylene cracking
D Jakobi et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2003)
Microstructural characterization of modified 25Cr-35Ni centrifugally cast steel furnace tubes
LH de Almeida et al.
MATERIALS CHARACTERIZATION (2002)
Creep property measurement of service-exposed SUS 316 austenitic stainless steel by the small-punch creep-testing technique
ML Saucedo-Muñoz et al.
JOURNAL OF MATERIALS RESEARCH (2002)