4.7 Article

Longan-Derived Biomass Carbon-Induced Cubic-Type Ferric Oxide Nanoparticles for Efficient Lithium-Ion Battery Anodes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Synergistic structure of LiFeO2 and Fe2O3 layers with electrostatic shielding effect to suppress surface lattice oxygen release of Ni-rich cathode

Youqi Chu et al.

Summary: To address the issues of surface side reactions, slow kinetics, and microcracks in Ni-rich cathodes for LIBs, a dual-modified protective coating consisting of LiFeO2 and Fe2O3 layers was fabricated on the surface of the cathode material (NCM811) by capturing lithium impurities in the electrolyte solution using an electric field. The LiFeO2 layer acted as an ionic conductor, enhancing Li+ transport, and showed a synergistic effect with the bulk material during charging/discharging. The Fe2O3 layer, containing oxygen vacancies, acted as an electrostatic shielding layer and effectively prevented the outward migration of O alpha-(alpha < 2), thus improving structural stability. As a result, the interface-protected NCM@LFO3 cathode exhibited excellent cycling stability (with a capacity retention of 82.4% after 600 cycles at 1 C) and maintained good performance even at a high cut-off voltage of 4.5 V (with a capacity retention of 88.9% after 200 cycles at 1 C).

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Physical

Cobalt Oxide Arrays Anchored to Copper Foam as Efficient Binder-free Anode for Lithium Ion Batteries

Hangning Liu et al.

Summary: This study proposes a simple in-situ strategy for the construction of high-dispersive cobalt oxide nanoneedle arrays on a copper foam substrate. The resulting CoO arrays serve as binder-free anodes in lithium-ion batteries, leading to outstanding rate capability and superior long-term cycling stability. This approach streamlines the electrode fabrication steps and holds significant promise for the future development of the battery industry.

CHEMPHYSCHEM (2023)

Review Chemistry, Physical

Engineering Cooperative Catalysis in Li-S Batteries

Jinlei Qin et al.

Summary: Lithium-sulfur (Li-S) batteries are seen as promising next-generation batteries due to their high theoretical capacity and low cost. However, the electrochemistry of aprotic S is hindered by the shuttling effect and slow conversion of soluble lithium polysulfides (LiPSs). Various electrocatalysts have been developed to improve the conversion kinetics of LiPSs, with heteroatom doping and polar catalyst incorporation playing an important role in overcoming these limitations.

ADVANCED ENERGY MATERIALS (2023)

Article Chemistry, Multidisciplinary

Cycling Stability of Lithium-Ion Batteries Based on Fe-Ti-Doped LiNi0.5Mn1.5O4 Cathodes, Graphite Anodes, and the Cathode-Additive Li3PO4

Pirmin Stueble et al.

Summary: This study focuses on the improved cycling stability of Li-ion batteries using Fe-Ti-doped LiNi0.5Mn1.5O4 (LNMO) high-voltage cathode active material and graphite anodes. By adding 1 wt% Li3PO4 as a cathode additive, the capacity retention for 1000 charge-discharge cycles reaches over 90% and the remaining capacities are 109 mAh g(-1) at an areal capacity of 2.3 mAh cm(-2) (potential range: 3.5-4.9 V). The improved cycling stability is attributed to the low Mn-III content of the Fe-Ti-doped LNMO active material and the use of Li3PO4 as the cathode-additive, which reduces transition metal deposition and prevents Li loss and cell polarization.

ADVANCED SCIENCE (2023)

Article Chemistry, Physical

Coordination chemistry-assisted ecofriendly preparation of Fe2O3 nanoparticles embedded in hierarchical carbon for improved lithium storage

Yueyan Pan et al.

Summary: A novel coordination chemistry-assisted method is demonstrated to prepare a superior performance Fe2O3/C composite anode for lithium ion batteries (LIBs). This composite anode exhibits improved conductivity, enhanced kinetics, high capacitive contribution, and good structure stability. It shows superior electrochemical properties such as high capacity, long life, and good rate performance, making it promising for LIB application. This work also has guiding significance for designing and developing ecofriendly and facile preparation methods of other metal oxides/carbon composites for advanced LIB anodes.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Article Materials Science, Multidisciplinary

Synergistic effect on the improved lithium ion storage performance in the porous Fe2O3@Fe3C@C composite

Yixin Ge et al.

Summary: The porous Fe2O3@Fe3C@C composite was synthesized through a simple two-step thermal treatment. Its structure, morphology, lithium ion storage performance, and diffusion kinetics were discussed. The composite demonstrated a stable cycling capacity of 800.3 mAh g-1 after 100 cycles at 0.1 A g-1, along with superior rate capability. The study also investigated the reversible redox reaction, stable solid electrolyte interphase films, and low charge transfer resistance of the composite.

MATERIALS RESEARCH BULLETIN (2023)

Article Chemistry, Physical

Ultrathin porous Fe2O3@C nanosheets: Novel preparation strategy and high lithium storage

Yueyan Pan et al.

Summary: Two-dimensional porous Fe2O3/C nanocomposites are prepared as anodes for lithium-ion batteries (LIBs), addressing the limitations of low conductivity and large volume change in Fe2O3. The conformal carbon coated ultrathin porous Fe2O3 nanosheets (Fe2O3@C) exhibit enhanced conductivity, fast kinetics, superior durability and high capacity, demonstrating outstanding electrochemical performance.

APPLIED SURFACE SCIENCE (2023)

Article Chemistry, Physical

Robust lamellar Fe2O3@SnO(2 )heterostructure for long cycling and high-rate lithium storage

Yao Lu et al.

Summary: This work presents a lamellar Fe2O3@SnO2 heterostructure composite for lithium-ion batteries with impressive capacity, good rate performance, and stable long-cycle durability. The uniform epitaxial growth of SnO2 nanorods on the lamellar Fe2O3 leads to the synergistic effect advantage of the unique heterostructure and two kinds of composition. The lamellar Fe2O3@SnO2 heterostructure provides a promising method for improving the energy storage performance of metal oxide composites and other types of nanocomposites.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

Article Energy & Fuels

Fe2O3/carbon derived from peanut shell hybrid as an advanced anode for high performance lithium ion batteries

Shuaiting Wu et al.

Summary: This paper introduces a peanut shell-derived graphene composite prepared by a two-step hydrothermal method and low-temperature calcination, which exhibits excellent electrochemical performance as an anode material for lithium-ion batteries, including high specific capacity and outstanding cycling stability. This work provides a new approach to improve anode materials in lithium-ion batteries using carbon derived from biomass.

JOURNAL OF ENERGY STORAGE (2023)

Article Electrochemistry

Constructing heterointerface of Bi/Bi2S3 with built-in electric field realizes superior sodium-ion storage capability

Rong Liu et al.

Summary: The construction of a Bi/Bi2S3 heterointerface effectively solves the volume fluctuations, low electrical conductivity, and reaction kinetics of bismuth sulfide in sodium-ion batteries. This modification leads to outstanding cycling life and rate capability, achieving high energy density.

ESCIENCE (2023)

Article Engineering, Environmental

Edge sites-driven accelerated kinetics in ultrafine Fe2O3 nanocrystals anchored graphene for enhanced alkali metal ion storage

Yingying Zhang et al.

Summary: Iron oxides anchored on graphene showed enhanced kinetics for high-rate lithium and sodium storage, exhibiting impressive capacity, rate performance, and long-term durability, surpassing most recorded Fe2O3 based electrodes. This approach may pave a new way for developing outstanding anode materials based on earth-rich resources for energy storage applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Nanoscience & Nanotechnology

Porous Fe2O3 nanorod-decorated hollow carbon nanofibers for high-rate lithium storage

Zhiwen Long et al.

Summary: In this study, a porous Fe2O3 nanorod-decorated hollow carbon nanofiber (HNF) anode was designed to improve the rate performance and cycling stability of lithium-ion batteries. The unique porous hollow structure provided free space that effectively alleviated volume expansion and facilitated the exposure of more active sites during the lithiation/delithiation process, leading to outstanding electrochemical performance.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Review Chemistry, Multidisciplinary

Fast Charging Anode Materials for Lithium-Ion Batteries: Current Status and Perspectives

Shengqiang Li et al.

Summary: With the rapid development of the electric vehicle market, there is a high demand for fast charging battery technology. However, traditional graphite anode materials have limitations in their ability to charge quickly. In this review, the current status of fast charging anode materials is summarized, including the challenges faced, the structures and lithium storage mechanisms of different materials, and the recent progress in improving rate performance through various approaches.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Energy & Fuels

Stabilization of Ultra-Small Stannic Oxide Nanoparticles in Optimizing the Lithium Storage Kinetics

Fanhao Meng et al.

Summary: Ultra-small SnO2 nanoparticle-embedded polyvinyl alcohol-derived carbon prepared by a simple co-precipitation method exhibits excellent performance in lithium-ion batteries, attributed to the confinement effect of the amorphous carbon shell and the role of conductive agent.

ENERGY & FUELS (2022)

Article Engineering, Electrical & Electronic

Growth of Epitaxial Fe2O3 Films on Lithium Niobate Substrates

V. A. Luzanov

Summary: Epitaxial films of hematite and maghemite were successfully obtained on LiNbO3 substrates using reactive magnetron high-frequency sputtering method. X-ray diffraction analysis showed that the small lattice mismatch allowed for the formation of structurally perfect epitaxial Fe2O3 layers with different polymorphic modifications on LiNbO3 substrates.

JOURNAL OF COMMUNICATIONS TECHNOLOGY AND ELECTRONICS (2022)

Article Chemistry, Physical

Amorphous Lithium-Phosphate-Encapsulated Fe2O3 as a High-Rate and Long-Life Anode for Lithium-Ion Batteries

Hang Dong et al.

Summary: Fe2O3 is a promising candidate for lithium-ion battery anode due to its high specific capacity, low cost, and environmental friendliness. However, it suffers from capacity fading and insufficient rate performance. By encapsulating Fe2O3 with lithium phosphate, the anode exhibits improved cycling stability and fast conversion reactions, leading to enhanced discharge performance.

ACS APPLIED ENERGY MATERIALS (2022)

Article Materials Science, Multidisciplinary

Facile synthesis of porous iron oxides heterostructural nanosheets as an enhanced anode material for lithium ion battery

Wen-Chao Shi et al.

Summary: To address the issues of poor electrical conductivity and volume expansion in Fe2O3 anodes for lithium-ion batteries, researchers synthesized porous Fe2O3 nanosheets with a heterostructural beta-Fe2O3/alpha-Fe2O3 composition. Through simple pyrolysis and subsequent washing, the nanosheets exhibited improved lithium-ion storage performance, with high reversible capacity and fast charging capability.

MATERIALS LETTERS (2022)

Article Chemistry, Physical

In Situ Grown MnO2 Nanoflower Arrays on Ni Foam (MnO2@NF) as 3D Lithiophilic Hosts for a Stable Lithium Metal Anode

Yanchao Fan et al.

Summary: A three-dimensional lithium-phobic host composed of Ni foam and MnO2 nanoflowers is developed for a stable lithium metal anode, which exhibits excellent stability, uniform lithium nucleation, and dendrite-free lithium deposition.

ACS APPLIED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Revealing the complex lithiation pathways and kinetics of core-shell NiO@CuO electrode

Jie Wang et al.

Summary: In this study, NiO@CuO core-shell nanocomposites were prepared and used as anodes for lithium-ion batteries. By using a combination of in situ and ex situ electron microscopy, the researchers identified a two-stage lithiation reaction pathway on NiO@CuO and revealed the key role of the core-shell structure in high cycling stability.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Superior lithium storage in Fe2O3 nanoporous arrays endowed by surface phosphorylation and bulk phosphorous doping

Jun Chen et al.

Summary: Extraordinary cyclability and rate performance boosting of nanoporous Fe2O3 film anode is achieved using facile phosphorous heteroatom doping, which promotes electron and Li+ transportation while enhancing surface faradaic redox sites through the synergistic effect of surface phosphorylation layer and bulk P doping defect.

APPLIED SURFACE SCIENCE (2022)

Article Nanoscience & Nanotechnology

Porous Fe2O3 Nanoparticles as Lithium-Ion Battery Anode Materials

Chi Zhang et al.

Summary: Fe2O3 nanoparticles with multicavity structures were successfully synthesized using a microwave-assisted-template method, showing excellent electrochemical performance when used as anode materials for lithium-ion batteries. The unique advantages of nanomaterials, high surface area, and large pore volume contribute to the improved movement of electrolyte and reduced resistance in Fe2O3-MW-4h nanoparticles.

ACS APPLIED NANO MATERIALS (2021)

Article Nanoscience & Nanotechnology

Three-dimensional porous flower-like S-doped Fe2O3 for superior lithium storage

Zhaoqian Yan et al.

Summary: The sulfur-doped three-dimensional porous flower-like Fe2O3, designed for lithium ion batteries, delivered high performance by changing morphology, improving electrical conductivity, and providing active sites for lithium storage.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Chemistry, Physical

Core-shell structured Fe2O3@Fe3C@C nanochains and Ni-Co carbonate hydroxide hybridized microspheres for high-performance battery-type supercapacitor

Shuge Dai et al.

Summary: A novel Fe2O3@Fe3C@C nanochains and urchin-like Ni-Co carbonate hydroxide hybridized microspheres were reported for advanced battery-type supercapacitors. The device showed high specific capacity, good rate capability, high energy density, and excellent cycling stability. In situ Raman spectroscopy revealed the reversibility of the NiCo-CHH electrode and the energy storage mechanism involving synergistic effects of Ni and Co ions.

JOURNAL OF POWER SOURCES (2021)

Article Engineering, Chemical

Rational design and synthesis of sandwich-like reduced graphene oxide/Fe2O3/N-doped carbon nanosheets as high-performance anode materials for lithium-ion batteries

Jitong Wang et al.

Summary: A sandwich-like nanostructure composed of reduced graphene oxide/Fe2O3/N-doped carbon nanosheets was designed to address the challenges of poor conductivity and volume change for iron oxide. It demonstrated outstanding cycle stability and high rate capability, showing great potential for further development in lithium ion batteries.

CHEMICAL ENGINEERING SCIENCE (2021)

Article Chemistry, Multidisciplinary

Improving cycling stability of Bi-encapsulated carbon fibers for lithium/sodium-ion batteries by Fe2O3 pinning

Tianyi Hou et al.

Summary: This study reported Fe2O3 nanoparticle-pinning Bi-encapsulated carbon fiber composites prepared through electrospinning technique, which improved the cycling stability and reversible capacity of Bi in lithium-ion and sodium-ion batteries.

CHINESE CHEMICAL LETTERS (2021)

Article Chemistry, Physical

Improved lithium storage in Fe2O3 nano-particles over nano-rods morphology

Jay Singh et al.

Summary: Fe2O3 nano-particles show superior electrochemical performance compared to nano-rods as anode materials in Lithium ion batteries, attributed to their high stability, small agglomerations, and providing extra reaction sites for large Li-ions. Nano-rods morphology leads to poor electrochemical performance due to structural collapse during lithiation/de-lithiation reactions after a certain number of cycles.

SOLID STATE IONICS (2021)

Article Chemistry, Inorganic & Nuclear

One-pot thermal decomposition of commercial organometallic salt to Fe2O3@C-N and MnO@C-N for lithium storage

Denghu Wei et al.

Summary: Fe2O3@C-N, MnO@C-N, and ZnO@C-N nanoparticles were successfully synthesized via thermal decomposition, showing promising reversible capacities and good cycling performances as anode materials for lithium storage. This synthetic strategy can be extended to prepare similar products efficiently.

DALTON TRANSACTIONS (2021)

Article Chemistry, Inorganic & Nuclear

Al-Doped Fe2O3 nanoparticles: advanced anode materials for high capacity lithium ion batteries

Yongqing Yuan et al.

Summary: Al-Doped Fe2O3 nanoparticles with a reconstructed electronic structure, oxygen vacancy and modified physical/chemical features are synthesized and utilized as an advanced anode for Lithium Ion Batteries (LIBs).

DALTON TRANSACTIONS (2021)

Article Chemistry, Inorganic & Nuclear

A facile route to achieve Fe2O3 hollow sphere anchored on carbon nanotube for application in lithium-ion battery

Yang Cao et al.

INORGANIC CHEMISTRY COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

Strain Coupling of Conversion-type Fe3O4 Thin Films for Lithium Ion Batteries

Sooyeon Hwang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Review Chemistry, Physical

Low voltage anode materials for lithium-ion batteries

Ali Eftekhari

ENERGY STORAGE MATERIALS (2017)

Article Chemistry, Multidisciplinary

TiO2 Hollow Spheres Composed of Highly Crystalline Nanocrystals Exhibit Superior Lithium Storage Properties

Genqiang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Article Chemistry, Multidisciplinary

Strongly coupled carbon nanofiber-metal oxide coaxial nanocables with enhanced lithium storage properties

Genqiang Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Multidisciplinary

α-Fe2O3 multi-shelled hollow microspheres for lithium ion battery anodes with superior capacity and charge retention

Simeng Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Multidisciplinary

Carbon-Encapsulated Fe3O4 Nanoparticles as a High-Rate Lithium Ion Battery Anode Material

Chunnian He et al.

ACS NANO (2013)

Article Chemistry, Multidisciplinary

General Formation of Complex Tubular Nanostructures of Metal Oxides for the Oxygen Reduction Reaction and Lithium-Ion Batteries

Genqiang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

Article Chemistry, Multidisciplinary

Accurate Control of Multishelled Co3O4 Hollow Microspheres as High-Performance Anode Materials in Lithium-Ion Batteries

Jiangyan Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

Article Chemistry, Physical

Origin of additional capacities in metal oxide lithium-ion battery electrodes

Yan-Yan Hu et al.

NATURE MATERIALS (2013)

Review Chemistry, Multidisciplinary

Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries

Liwen Ji et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Review Chemistry, Multidisciplinary

Nanomaterials for rechargeable lithium batteries

Peter G. Bruce et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)