☆ 4.7 Article

Depolymerization of Household Plastic Waste via Catalytic Hydrothermal Liquefaction

ENERGY & FUELS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Environmental Sciences

Impact of Red Sludge Dumps, Originating from Industrial Activity, on the Soil and Underground Water

Olimpia Smaranda Mintas et al.

Summary: The management of waste in the aluminum industry, particularly red sludge, is a sensitive economic and environmental issue. This research aims to evaluate the environmental aspects of storing red sludge in a landfill in Oradea, Romania. Monitoring of soil and groundwater showed that the red sludge poses a pollution risk and requires further monitoring.

WATER (2023)

添加到收藏夹

Article Energy & Fuels

Influence of Red Mud Catalyst and Reaction Atmosphere on Hydrothermal Liquefaction of Algae

Tawsif Rahman et al.

Summary: This study investigated the effects of reaction environments on biocrude production from Tetraselmis sp. algae strain by HTL process using red mud (RM) based catalyst. The Ni/RM catalyst produced the highest biocrude yield and reduced sulfur and oxygen content, while the RRM catalyst maximized the biocrude carbon content.

ENERGIES (2023)

添加到收藏夹

Article Thermodynamics

Characterization of pyrolysis oil produced from organic and plastic wastes using an auger reactor

M. M. Hasan et al.

Summary: The objective of this study was to evaluate the suitability of pyrolysis oils produced from organic and plastic wastes for engine application. The study conducted experiments using different waste materials and temperatures, and characterized the properties of the obtained pyrolysis oils using various analysis techniques. The results showed that the oils derived from organic wastes had limitations such as higher viscosity and density, while the oil obtained from HDPE met most criteria to be an engine fuel, although further testing in an engine is needed for confirmation.

ENERGY CONVERSION AND MANAGEMENT (2023)

添加到收藏夹

Article Engineering, Environmental

Multilayer plastic film chemical recycling via sequential hydrothermal liquefaction

Edoardo Tito et al.

Summary: This study proposes a two-stage hydrothermal liquefaction (HTL) process for chemical recycling of a two-layer film made of LLDPE-PET. Experimental results showed that a first subcritical stage at 325 degrees C can recover 94% of terephthalic acid (TPA) from the PET fraction as a solid and 47% of ethylene glycol in the aqueous phase. The unconverted PE can then be used as feedstock for a subsequent supercritical HTL stage, achieving mass yields of 47% and 29% in a naphtha-gasoline oil and an alkane-rich gas, respectively.

RESOURCES CONSERVATION AND RECYCLING (2023)

添加到收藏夹

Article Engineering, Environmental

Transforming red mud into an efficient Acid-Base catalyst by hybridization with mesoporous ZSM-5 for Co-pyrolysis of biomass and plastics

Mohamed H. M. Ahmed et al.

Summary: This study reported the development of a novel multifunctional catalyst by modifying red mud for the co-pyrolysis of biomass and polyethylene. The hybrid catalyst exhibited higher porosity and catalytic activity, leading to an increase in the produced oil's H/Ceff value, making it a more suitable fuel.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Thermodynamics

A review on catalytic pyrolysis of plastic wastes to high-value products

Yujie Peng et al.

Summary: With the increasing plastic waste and decreasing fossil energy, pyrolysis has emerged as a promising technology for converting plastic waste into fuels and chemicals. This review discusses the properties of common plastics, the pyrolysis mechanism, and the product distribution. Catalysts, such as zeolites, base catalysts, and clays, have shown advantages over thermal cracking. Upgrading and further utilization of the liquid fuels and non-condensable gas co-product are necessary before commercial application. The review emphasizes the importance of techno-economic assessment and aims to inspire research efforts in creating a circular economy.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Thermodynamics

Performance of biochar assisted catalysts during hydroprocessing of non-edible vegetable oil: Effect of transition metal source on catalytic activity

Poulami Roy et al.

Summary: In this study, biochar-supported nickel and cobalt catalysts were developed for the hydrotreatment of carinata oil. The catalysts were characterized and a reaction network was proposed based on chemical analysis of upgraded carinata oil and erucic acid model compound. Results indicated that methanation was more dominant on nitrate-based catalysts, while dehydrogenation and aromatization occurred mainly on hydroxide-based catalysts.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Engineering, Environmental

Precise regulation of acid pretreatment for red mud SCR catalyst: Targeting on optimizing the acidity and reducibility

Xiang Zhang et al.

Summary: In this study, the researchers achieved directional control of the chemical state of active sites in red mud by tuning the acid pretreatment process. Dealkalization improved the acidity and reducibility of red mud, leading to high NOx conversion and SCR performance of the activated catalysts at pH values of 3 and 5.

FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Catalytic hydrothermal liquefaction of Spirulina platensis for biocrude production using Red mud

Janakan S. Saral et al.

Summary: In this study, catalytic hydrothermal liquefaction of Spirulina platensis using red mud as a catalyst was investigated. The catalyst significantly influenced the biocrude yield and quality, with process conditions such as temperature, reaction time, slurry concentration, and catalyst-to-biomass ratio playing important roles in maximizing the biocrude yield. By analyzing the biocrude components and investigating various process parameters, it was found that nitrogen-containing compounds were not prominent in biocrude from catalytic hydrothermal liquefaction.

BIOMASS CONVERSION AND BIOREFINERY (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Thermochemical Conversion of Plastic Waste into Fuels, Chemicals, and Value-Added Materials: A Critical Review and Outlooks

Ren-Xuan Yang et al.

Summary: This review summarizes the current research status, commercial implementation status, and current challenges and future perspectives of catalytic thermochemical conversion of plastic waste.

CHEMSUSCHEM (2022)

添加到收藏夹

Article Engineering, Environmental

Heavy metals, PAHs and POPs in recycled polyethylene samples of agricultural, post-commercial, post-industrial and post-consumer origin

Samuel S. Nunez et al.

Summary: This study analyzed recycled polyethylene samples from agricultural, post-commercial, post-industrial, and post-consumer sources, and found that black samples had higher concentrations of contaminants, particularly PCBs and PCDD/Fs. The PAHs content was also higher in black samples, related to the carbon black content. Furthermore, the PCDD/Fs congener profile in the samples was similar to that found in urban air samples, indicating environmental influence on the plastic. However, these pollutants were significantly reduced during the recycling processes.

WASTE MANAGEMENT (2022)

添加到收藏夹

Article Thermodynamics

Hydrotreatment of solvent-extracted biocrude from hydrothermal liquefaction of municipal sewage sludge

Hossein Jahromi et al.

Summary: This research investigated the influence of four solvents on the hydrotreatment of hydrothermal liquefaction biocrude derived from municipal sewage sludge. The results showed that hexane extraction resulted in the highest biocrude yield and the upgraded oil produced from hexane-extracted biocrude had the best quality in terms of fuel properties.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Engineering, Environmental

Production of a bio-magnetic adsorbent via co-pyrolysis of pine wood waste and red mud

Kang Kang et al.

Summary: This study focuses on the co-pyrolysis of different biomasses with red mud and investigates the reaction mechanism and characterization of the produced magnetic adsorbents. The findings show that samples prepared at high temperature exhibit the best performance, and cellulose-rich adsorbents have higher adsorption efficacy.

WASTE MANAGEMENT (2022)

添加到收藏夹

Article Environmental Sciences

Valorization of Plastic Waste: A Lab-Scale Approach with the Aid of Solar Hydrothermal Liquefaction Technology

Charikleia A. Poravou et al.

Summary: This study investigates the product properties and biocrude yield resulting from the hydrothermal liquefaction (HTL) of plastic waste and polypropylene using conventional heating and solar energy-aided methods. The results show that the solar energy-aided treatment can increase the biocrude yield and improve the heating value of the products.

WASTE AND BIOMASS VALORIZATION (2022)

添加到收藏夹

Article Thermodynamics

Understanding the effects of feedstock blending and catalyst support on hydrotreatment of algae HTL biocrude with non-edible vegetable oil

Poulami Roy et al.

Summary: The performance of cobalt-molybdenum catalysts in the hydrotreating of algae biocrude and carinata oil was investigated. The results showed a synergistic effect in the hydrotreating of the blends, with the yield of the upgraded blend oils higher than the individual parent oils. Sulfided CoMo/DF exhibited superior activity in hydrodeoxygenation reactions, while sulfided CoMo/Al showed high activity in hydrodenitrogenation and hydrodesulfurization reactions.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Engineering, Environmental

Hydrothermal liquefaction of sewage sludge - effect of four reagents on relevant parameters related to biocrude and PFAS

Weilan Zhang et al.

Summary: Catalytic hydrothermal liquefaction can convert wet biomass into oil-like substances and has the potential to degrade pollutants in the process. Adding red mud to the process can improve the yield of the biocrude and increase carbon conversion efficiency and energy recovery. However, some PFAS mass increased in the HTL products, indicating that not all PFAS in sewage sludge were degraded under the studied conditions.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Hydrothermal liquefaction of municipal sewage sludge: Effect of red mud catalyst in ethylene and inert ambiences

Tawsif Rahman et al.

Summary: The study found that ethylene atmosphere can increase biocrude yield, reduce viscosity, lower acidity, and efficiently reduce nitrogen content in the biocrude. These results suggest that ethylene atmosphere has the potential to enhance biocrude production during catalytic HTL treatment.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Engineering, Environmental

Synergistic interactions during hydrothermal liquefaction of plastics and biomolecules

Mahadevan Subramanya Seshasayee et al.

Summary: Interactions between biomolecules and plastics can enhance the oil yield of hydrothermal liquefaction and enable processing of plastics at lower temperatures. Different types of biomolecules synergistically interact with plastic mixtures to accelerate the depolymerization process.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Hydrothermal decomposition of polyethylene waste to hydrocarbons rich oil

Maja Colnik et al.

Summary: In this study, the supercritical water degradation of polyethylene plastics was investigated, showing that under high temperature and long reaction times, the concentration of long-chain hydrocarbons decreased in the oil phase, while short-chain hydrocarbons increased in the gas phase.

JOURNAL OF SUPERCRITICAL FLUIDS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Back-to-monomer recycling of polycondensation polymers: opportunities for chemicals and enzymes

Shanmugam Thiyagarajan et al.

Summary: The use of plastics has significantly increased in recent decades, but renewable alternatives are currently not sufficient to replace fossil-based plastics. Chemical recycling processes offer potential solutions for transforming plastic waste into new polymers, but further strategies are needed to efficiently utilize plastic waste.

RSC ADVANCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of Novel Biolubricants from Waste Cooking Oil and Cyclic Oxygenates through an Integrated Catalytic Process

Hossein Jahromi et al.

Summary: This study proposes a novel approach to produce biolubricants through the reaction between waste cooking oil and cyclic oxygenated hydrocarbons. The resulting biolubricants have long hydrocarbon chains, low unsaturation, naphthenic rings, and polar molecules, demonstrating good pour-point, viscosity, viscosity index, and volatility properties.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Red Mud from the Aluminium Industry: Production, Characteristics, and Alternative Applications in Construction Materials-A Review

Nathalia C. G. Silveira et al.

Summary: Approximately 120 million tons of red mud is produced globally each year, posing critical environmental challenges due to its high basicity and potential leaching. Industrial solutions consuming large volumes of this material are needed, with potential reuse in metallurgical procedures, building materials, and chemical industry.

SUSTAINABILITY (2021)

添加到收藏夹

Article Chemistry, Applied

Production of green transportation fuels from Brassica carinata oil: A comparative study of noble and transition metal catalysts

Hossein Jahromi et al.

Summary: This study demonstrates the production of jet and diesel range hydrocarbons from non-edible Brassica carinata oil, with Ni/SiO2-Al2O3 catalyst achieving the highest liquid yield. The results indicate that all catalysts are capable of regeneration after partial deactivation.

FUEL PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Review Engineering, Environmental

Applications of red mud as an environmental remediation material: A review

Mengfan Wang et al.

Summary: Red mud is an alkaline by-product from alumina plants, and various waste treatment methods utilizing red mud as an environmental remediation material have been developed. RM-ERMs can be used for purifying waste water, waste gas, and soil, providing an opportunity to improve the environment through purification technologies.

JOURNAL OF HAZARDOUS MATERIALS (2021)

添加到收藏夹

Review Thermodynamics

The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions

Onur Dogu et al.

Summary: Chemical recycling of solid plastic waste is crucial for reducing pollution, enabling circular economy. Pyrolysis and gasification technologies show promise in reducing greenhouse gas emissions, but require improved understanding of chemistry and innovative reactor designs.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Systematic and collaborative approach to problem solving using X-ray photoelectron spectroscopy

Neal Fairley et al.

Summary: The methodology presented in this work is a result of interactions between junior and senior XPS users within the CasaXPS framework, particularly through workshops organized by IMN. The discussions from these workshops have been instrumental in developing the XPS data processing concept and promoting interdisciplinary collaboration in surface analysis problem-solving. This methodology has evolved over subsequent workshops and now represents the philosophy used in CasaXPS spectral data processing paradigm.

APPLIED SURFACE SCIENCE ADVANCES (2021)

添加到收藏夹

Article Chemistry, Physical

Supercritical water co-liquefaction of LLDPE and PP into oil: properties and synergy

Peitao Zhao et al.

Summary: The study found that scH(2)O can efficiently liquefy a mixture of LLDPE and PP into oil, achieving high conversion rate and oil yield without the need for additional catalysts or hydrogen. During co-liquefaction, more cyclic hydrocarbons were generated and the oil quality was slightly reduced.

SUSTAINABLE ENERGY & FUELS (2021)

添加到收藏夹

Article Chemistry, Analytical

Pyrolysis of plastic waste: Opportunities and challenges

Muhammad Saad Qureshi et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)

添加到收藏夹

Article Engineering, Environmental

Co-processing of common plastics with pistachio hulls via hydrothermal liquefaction

Sukanya Hongthong et al.

WASTE MANAGEMENT (2020)

添加到收藏夹

Article Thermodynamics

Enhancing jet fuel range hydrocarbons production from catalytic copyrolysis of Douglas fir and low-density polyethylene over bifunctional activated carbon catalysts

Xiaona Lin et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Effects of Inexpensive Mixed Metal Oxides for Catalytic Hydrothermal Liquefaction of Food Wastes

Feng Cheng et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

Conversion of polyethylene waste into clean fuels and waxes via hydrothermal processing (HTP)

Kai Jin et al.

FUEL (2020)

添加到收藏夹

Article Engineering, Chemical

Screening of common synthetic polymers for depolymerization by subcritical hydrothermal liquefaction

Juliano Souza dos Passos et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

添加到收藏夹

Article Engineering, Environmental

Red-mud based porous nanocatalysts for valorisation of municipal solid waste

Mohamed H. M. Ahmed et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hydrogen production via thermocatalytic decomposition of methane using carbon-based catalysts

Khalida Harun et al.

RSC ADVANCES (2020)

添加到收藏夹

Article Energy & Fuels

Oil from plastic via hydrothermal liquefaction: Production and characterization

Mahadevan Subramanya Seshasayee et al.

APPLIED ENERGY (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Disposal Practices and Utilization of Red Mud (Bauxite Residue): A Review in Indian Context and Abroad

Suchita Rai et al.

JOURNAL OF SUSTAINABLE METALLURGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Composite zeolite beta catalysts for catalytic hydrocracking of plastic waste to liquid fuels

Dureem Munir et al.

MATERIALS FOR RENEWABLE AND SUSTAINABLE ENERGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hydrothermal Treatment of E-Waste Plastics for Tertiary Recycling: Product Slate and Decomposition Mechanisms

Xuyuan Zhao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Use of Supercritical Water for the Liquefaction of Polypropylene into Oil

Wan-Ting Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Desilicated zeolite BEA for the catalytic cracking of LDPE: the interplay between acidic sites' strength and accessibility

Kamila Pyra et al.

CATALYSIS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Hydrodeoxygenation of pinyon-juniper catalytic pyrolysis oil using red mud-supported nickel catalysts

Hossein Jahromi et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

添加到收藏夹

Article Thermodynamics

Study on co-liquefaction of Spirulina and Spartina alterniflora in ethanol-water co-solvent for bio-oil

Huan Feng et al.

ENERGY (2018)

添加到收藏夹

Article Thermodynamics

Integration of hydrothermal liquefaction and supercritical water gasification for improvement of energy recovery from algal biomass

Pei-Gao Duan et al.

ENERGY (2018)

添加到收藏夹

Review Engineering, Environmental

An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling

John N. Hahladakis et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

添加到收藏夹

Article Engineering, Chemical

Hydrodeoxygenation of Aqueous-Phase Catalytic Pyrolysis Oil to Liquid Hydrocarbons Using Multifunctional Nickel Catalyst

Hossein Jahromi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Article Engineering, Chemical

Hydrocracking of a plastic mixture over various micro-mesoporous composite zeolites

Dureem Munir et al.

POWDER TECHNOLOGY (2017)

添加到收藏夹

Article Energy & Fuels

Production of upgraded bio-oils by biomass catalytic pyrolysis in an auger reactor using low cost materials

A. Veses et al.

FUEL (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Continuous catalytic upgrading of fast pyrolysis oil using iron oxides in red mud

James R. Kastner et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Effect of temperature and Na2CO3 catalyst on hydrothermal liquefaction of algae

Rajdeep Shakya et al.

ALGAL RESEARCH-BIOMASS BIOFUELS AND BIOPRODUCTS (2015)

添加到收藏夹

Article Energy & Fuels

Production and characterization of bio-oil and bio-char from pyrolysis of potato peel wastes

Shaobo Liang et al.

BIOMASS CONVERSION AND BIOREFINERY (2015)

添加到收藏夹

Article Agricultural Engineering

Insight into the effect of hydrogenation on efficiency of hydrothermal liquefaction and physico-chemical properties of biocrude oil

HongYi Li et al.

BIORESOURCE TECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Analytical

Hydrothermal liquefaction of lignite, wheat straw and plastic waste in sub-critical water for oil: Product distribution

Baofeng Wang et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives

Mohd Hafizil Mat Yasin et al.

MALAYSIAN TECHNICAL UNIVERSITIES CONFERENCE ON ENGINEERING & TECHNOLOGY 2012 (MUCET 2012) (2013)

添加到收藏夹

Article Engineering, Environmental

Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste

A. Adrados et al.

WASTE MANAGEMENT (2012)

添加到收藏夹

Article Chemistry, Physical

Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud

A. Lopez-Urionabarrenechea et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2011)

添加到收藏夹

Article Agricultural Engineering

Chemical properties of biocrude oil from the hydrothermal liquefaction of Spirulina algae, swine manure, and digested anaerobic sludge

Derek R. Vardon et al.

BIORESOURCE TECHNOLOGY (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient Dehydrogenation of Formic Acid Using an Iron Catalyst

Albert Boddien et al.

SCIENCE (2011)

添加到收藏夹

Article Chemistry, Analytical

Pyrolysis of the rejects of a waste packaging separation and classification plant

I. de Marco et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)

添加到收藏夹

Article Chemistry, Analytical

Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time

Jude A. Onwudili et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)

添加到收藏夹

Review Chemistry, Physical

Chemical recycling of plastics using sub- and supercritical fluids

Motonobu Goto

JOURNAL OF SUPERCRITICAL FLUIDS (2009)

添加到收藏夹

Article Polymer Science

Thermal decomposition of polystyrene in supercritical methanol

Hee-Yong Shin et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

添加到收藏夹

Review Chemistry, Physical

Hot compressed water as reaction medium and reactant - Properties and synthesis reactions

A. Kruse et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2007)

添加到收藏夹

Article Chemistry, Physical

Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds

AP Grosvenor et al.

SURFACE AND INTERFACE ANALYSIS (2004)

添加到收藏夹

Article Polymer Science

The catalytic effect of Red Mud on the degradation of poly (vinyl chloride) containing polymer mixture into fuel oil

J Yanik et al.

POLYMER DEGRADATION AND STABILITY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.