☆ 4.7 Article

Heat transfer enhancement and pressure loss analysis of hydrogen-fueled microcombustor with slinky projection shape channel for micro-thermophotovoltaic system

ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Effect of oxidizer dilution on thermophotovoltaic performance of premixed ammonia/hydrogen/air combustion in radial micro-combustor

Amirreza Mohammadpour et al.

Summary: This study investigates the combustion characteristics, thermal performance, and emissions analyses of a micro-combustor for thermo-photovoltaic application. The results show that increasing the inlet velocity enhances the temperature distribution uniformity and energy conversion efficiency. However, increasing the air dilution level reduces the overall thermo-photovoltaic efficiency and NOx emissions.

FUEL (2023)

添加到收藏夹

Article Energy & Fuels

Exergy analysis and energy output improvement of the micro-thermophotovoltaic system via investigating the fractal angles of secondary Y-shaped fins in the micro combustor

Zongguo Xue et al.

Summary: This study aims to improve the energy output of micro thermophotovoltaic systems by further exploring the thermal performance of the embedded bionic Y-shaped fins (BYF) micro combustor. The results show that the novel design with different fractal angles outperforms the traditional design in terms of thermal performance and energy efficiency, but the temperature uniformity decreases with increasing fractal angle.

FUEL (2023)

添加到收藏夹

Article Energy & Fuels

Numerical simulation and emission analysis of ammonia/oxygen premixed combustion process in micro-combustor with baffle

Shanshan Xiao et al.

Summary: This paper studied the combustion and emission characteristics of ammonia/oxygen in a micro burner with a baffle by numerical simulation. The results show that the addition of a baffle reduces the channel temperature, radiation efficiency, and NO emission. The length, width, and position of the baffle have an impact on the temperature field and NO emission.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2022)

添加到收藏夹

Article Energy & Fuels

Comprehensive numerical insight the thermal performance improvement of the micro combustors with internal bionic Y-shaped fins for micro-thermal voltaic system applications

Zongguo Xue et al.

Summary: An innovative micro-combustion chamber with internal Y-shaped fins is introduced to enhance the comprehensive thermal performance of the micro thermal voltaic system (MTPV). The results show that the micro-combustion chamber with internal Y-shaped fins exhibits excellent thermal performance. However, an increase in the number of fins leads to a decrease in temperature uniformity and an increase in pressure drop.

FUEL (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of a crossed-semicircular-plate on thermal performance of micro-combustor fueled by premixed hydrogen-air mixture

Hongyan Zuo et al.

Summary: This article presents a novel crossed semicircular plate to enhance the thermal efficiency of a micro-combustor. The effects of various design parameters on the thermal performance of the micro-combustor were investigated, and the findings provide important guidance for the design and optimization of micro-combustors.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Investigation on combustion characteristics and thermal performance of a three rearward-step structure micro combustor fueled by premixed hydrogen/air

Yan Tan et al.

Summary: A three-dimensional mathematical model of premixed hydrogen/air mixtures in micro combustors with rearward-step structure is established in this study to achieve high and uniform wall temperature distribution. The effects of rearward-step structure and inlet velocity on combustion characteristics and thermal performance in the micro combustor are investigated. The results indicate that the rearward-step structure enhances combustion intensity and stabilizes the flame, but also increases the temperature non-uniformity of the outer wall in the micro combustor.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Reacting flow characteristics based on the axis-switching phenomenon in a baffled micro combustor with rotated noncircular holes for micro-thermophotovoltaic system

Won Hyun Kim et al.

Summary: This study explores the design of a combustor for a thermophotovoltaic (TPV) generator to strengthen the axis-switching phenomenon. Various simulations and flow field investigations are conducted to analyze the effects of noncircular holes in the combustor on combustion efficiency.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Chemistry, Physical

Entropy production and enhanced thermal performance studies on counter-flow double-channel hydrogen/ammonia-fuelled micro-combustors with different shaped internal threads

He Zhao et al.

Summary: This study presents a numerical analysis of the performances of counterflow double-channel micro-combustors in terms of the first and second laws. The results indicate that the double-channel configuration offers improved uniformity of wall temperature compared to the single channel configuration, with the oval shaped thread configuration achieving the highest wall temperature and uniformity. Increasing the inlet velocity leads to a higher average wall temperature and slightly reduced uniformity. Chemical reaction is found to be the main contributor to entropy generation. Regardless of the thread shapes, the second law efficiency remains just below 0.5. Thread shapes have no significant influence on the combustor exergy. The use of a blended ammonia-hydrogen fuel results in a slightly higher average wall temperature and less uniform wall temperature.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Parametric study of inserting internal spiral fins on the micro combustor performance for thermophotovoltaic systems

Ziqiang He et al.

Summary: With the rapid development of MEMS devices, there is a growing interest in power systems based on micro scale combustion. This study investigates the thermal performance and flame characteristics of micro combustion using three-dimensional models and detailed reaction mechanisms. The findings highlight the significant impact of spiral fins on the energy output of micro thermophotovoltaic systems.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Article Thermodynamics

Effects of micro-combustor geometry and size on the heat transfer and combustion characteristics of premixed hydrogen/air flames

Alireza Rahbari et al.

Summary: The major challenge in the development of micro-combustors is flame instabilities, which lead to non-uniform wall temperature distribution and lower combustion efficiency. This research investigates the combustion characteristics and geometrical configurations on flame stability and combustion efficiency, with a detailed chemical reaction mechanism developed and parametric study conducted. Increasing thermal conductivity coefficient, equivalence ratio, and using a micro-combustor with bluff body are identified as effective ways to improve combustion performance.

ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Non-premixed combustion characteristics and thermal performance of a catalytic combustor for micro-thermophotovoltaic systems

Linhong Li et al.

Summary: The study verified that a symmetrical configuration of micro-combustor can improve combustion efficiency and radiation efficiency, allowing it to operate at higher average velocities. Furthermore, as the average velocity increases, combustion efficiency decreases monotonically while radiation efficiency and radiant energy output increase first and then decrease.

ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Heat transfer and entropy production evaluation on premixed hydrogen/air-fuelled micro-combustors with internal threads

Siliang Ni et al.

Summary: The proposed micro-combustor with tailored internal threads aims to improve the wall temperature uniformity and enhance the second law efficiency of a micro thermophotovoltaic (MTPV) system. Computational fluid dynamics simulations show that the corrugated thread structures can reduce flame temperature and improve heat transfer significantly. The study also reveals the impact of inlet velocity and nominal diameter on thermal performances of the system.

FUEL (2021)

添加到收藏夹

Article Chemistry, Physical

Enhance the energy and exergy performance of hydrogen combustion by improving the micro-combustor outlet in thermofluidic systems

Salar Mohseni et al.

Summary: This study focuses on improving the exit part of conventional micro-combustors to increase heat transfer efficiency and decrease exhaust gas temperature. By enhancing exhaust gas velocity and increasing heat transfer surface area, the new micro-combustors show reduced exhaust gas temperature and increased wall temperature uniformity. Furthermore, micro combustors with porous media demonstrate the best energy and exergy performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement and exergy efficiency improvement of a micro combustor with internal spiral fins for thermophotovoltaic systems

Ziqiang He et al.

Summary: By introducing internal spiral fins, the novel micro combustor can effectively improve the energy efficiency and output of micro thermophotovoltaic system, although with increased pressure loss. Experiment results demonstrate that the micro combustor with 8 spiral fins achieves the highest efficiency and energy output at different inlet velocities.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Numerical investigations on hydrogen-fueled micro-cylindrical combustors with cavity for micro-thermophotovoltaic applications

Wei Zuo et al.

Summary: The study found that the micro-cylindrical combustor with cavity has better thermal performance compared to the one without cavity. By analyzing the effects of cavity length and depth, the optimal cavity size was determined, and it was concluded that the combustor with cavity has better potential for applications in micro-TPV systems.

ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Heat recirculation and heat losses in porous micro-combustors: Effects of wall and porous media properties and combustor dimensions

Jun Li et al.

Summary: The study aims to analyze heat fluxes in porous micro-combustors and discuss the effects of wall thermal conductivity and porous media properties on flame temperature. Results show that smaller porous micro-combustors have a higher proportion of heat recirculation relative to heat losses, and flame temperature is inversely related to the ratio of total heat losses to total heat recirculation.

ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Comparative investigation of combustion and thermal characteristics of a conventional micro combustor and micro combustor with internal straight/spiral fins for thermophotovoltaic system

Ziqiang He et al.

Summary: The study focuses on the impact of hydrogen mass flow rate, equivalence ratio, and materials on the thermal performance of micro-thermophotovoltaic (MTPV) system, providing suggestions for improving energy output.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Effects of porous media on partially premixed combustion and heat transfer in meso-scale burners fuelled with ethanol

Xinjian Chen et al.

Summary: The experimental investigation in this work reveals that foamed porous media significantly enhance heat transfer efficiency in meso-scale burners, showing notable impacts on flame structure and temperature distribution.

ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Thermal performances and emitter efficiency improvement studies on premixed micro-combustors with different geometric shapes for thermophotovoltaics applications

Siliang Ni et al.

Summary: This study compared the thermal performance and efficiency of unconventional T- and Y-shaped micro-combustors with the traditional I-shaped one. Results showed significant improvements in thermal performance and efficiency for T- and Y-shaped combustors under the same conditions. Optimization of parameters can enhance combustion efficiency.

ENERGY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Optimizing thermal performance and exergy efficiency in hydrogen-fueled meso-combustors by applying a bluff-body

Tao Cai et al.

Summary: This study discusses the effects of applying a bluff-body on the thermal performance and exergy efficiency in hydrogen-fueled meso-scale combustors, with evaluations of key parameters and optimal geometry obtained through numerical simulations. The results show significant improvements in the bottom wall mean temperature and exergy efficiency with a bluff-body applied, demonstrating the feasibility of enhancing thermal performance in combustors.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Chemistry, Physical

Numerical investigation of a novel micro combustor with a central and bilateral slotted blunt body

Ziqiang He et al.

Summary: The newly designed MCSB, with a central and bilateral slotted blunt body, shows significant improvement in combustion performance by effectively preventing flame tip opening and exhibiting higher combustion efficiency and blown-off limit. The blown-off limit of MCSB can reach up to 756 cm(3)/s at a flow rate ratio of 0.2 and a bluff body angle of 90 degrees, which is 61.5% higher than that of conventional combustors.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Multi-factor impact mechanism on combustion efficiency of a hydrogen-fueled micro-cylindrical combustor

Wei Zuo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Numerical investigations on thermal performance enhancement of hydrogen-fueled micro planar combustors with injectors for micro-thermophotovoltaic applications

Wei Zuo et al.

ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Development of a numerical model for performance prediction of an integrated microcombustor-thermoelectric power generator

Karan Hiranandani et al.

ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Combustion characteristics and thermal enhancement of premixed hydrogen/air in micro combustor with pin fin arrays

Ziqiang He et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Enhancement of combustion performance in a microchannel: Synergistic effects of bluff-body and cavity

Zheng Zhang et al.

FUEL (2020)

添加到收藏夹

Article Energy & Fuels

Excess enthalpy combustion of methane-air in a novel micro non-premixed combustor with a flame holder and preheating channels

Jianlong Wan et al.

FUEL (2020)

添加到收藏夹

Article Chemistry, Physical

Blowout limit of premixed flame in a micro preheated combustor with a flame holder at different blockage ratios

Jianlong Wan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Numerical investigations on combustion and emission characteristics of a novel elliptical jet-stabilized model combustor

Xiao Yang et al.

ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Numerical and entropy studies of hydrogen-fuelled micro-combustors with different geometric shaped ribs

Siliang Ni et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Combustion characteristics and thermal performance of premixed hydrogen-air in a two-rearward-step micro tube

Qingguo Peng et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Evaluation of the non-gray weighted sum of gray gases models for radiative heat transfer in realistic non-isothermal and non-homogeneous flames using decoupled and coupled calculations

Xiao Yang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Review Thermodynamics

Micro-power generation using micro-turbine (moving) and thermophotovoltaic (non-moving) systems

Seyed Ehsan Hosseini

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Comparative study of combustion and thermal performance in a swirling micro combustor under premixed and non-premixed modes

Xiao Yang et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

A comprehensive experimental characterisation of a novel porous media combustion-based thermophotovoltaic system with controlled emission

Philippe Gentillon et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Investigation of combustion and emission performance of a micro combustor: Effects of bluff body insertion and oxygen enriched combustion conditions

Harun Yilmaz

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

The numerical study of the energy and exergy efficiencies of the micro-combustor by the internal micro-fin for thermophotovoltaic systems

Ebrahim Nadimi et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Thermodynamics

Combustion in wavy micro-channels for thermo-photovoltaic applications - Part I: Effects of wavy wall geometry, wall temperature profile and reaction mechanism

Zakaria Mansouri

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Chemistry, Physical

Enhancement of thermal performance by converging-diverging channel in a micro tube combustor fueled by premixed hydrogen/air

Xiao Yang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Numerical study on premixed hydrogen/air combustion characteristics in micro-combustor with slits on both sides of the bluff body

Yunfei Yan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Effect of heat and mass transfer on the combustion stability in catalytic micro-combustors

Junjie Chen et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Compact design of planar stepped micro combustor for portable thermoelectric power generation

B. Aravind et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Energy & Fuels

Combustion characteristics of premixed hydrogen/air flames in a geometrically modified micro combustor

Ilker Yilmaz et al.

FUEL (2018)

添加到收藏夹

Article Thermodynamics

Effect of backward facing step on radiation efficiency in a micro combustor

Hosein Faramarzpour et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)

添加到收藏夹

Article Thermodynamics

Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor

Wei Zuo et al.

ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

Effect of micro-pin-fin arrays on the heat transfer and combustion characteristics in the micro-combustor

Jianfeng Pan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

A numerical study on combustion and emission characteristics of premixed hydrogen air flames

Omer Cam et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Characterization of commercial thermoelectric modules for application in energy harvesting wireless sensor nodes

Dejan Milic et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Energy & Fuels

Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications

Saad Akhtar et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Engineering, Chemical

Combustion characteristics and performance evaluation of premixed methane/air with hydrogen addition in a micro-planar combustor

Aikun Tang et al.

CHEMICAL ENGINEERING SCIENCE (2015)

添加到收藏夹

Article Thermodynamics

Development of a high-temperature and high-uniformity micro planar combustor for thermophotovoltaics application

Dongyue Jiang et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Review Thermodynamics

A comprehensive review on vibration based micro power generators using electromagnetic and piezoelectric transducer mechanisms

Abu Raihan Mohammad Siddique et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Chemistry, Physical

A numerical investigation on combustion characteristics of H2/air mixture in a microcombustor with wall cavities

Jianlong Wan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

添加到收藏夹

Article Chemistry, Physical

The effect of the blockage ratio on the blow-off limit of a hydrogen/air flame in a planar micro-combustor with a bluff body

Aiwu Fan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Experimental and numerical study of the wall temperature of cylindrical micro combustors

J. Li et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)

添加到收藏夹

Article Thermodynamics

Numerical modeling of non-adiabatic heat-recirculating combustors

C. H. Kuo et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of wall thickness of micro-combustor on the performance of micro-thermophotovoltaic power generators

WM Yang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2005)

添加到收藏夹

Article Thermodynamics

Combustion in micro-cylindrical combustors with and without a backward facing step

WM Yang et al.

APPLIED THERMAL ENGINEERING (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.