☆ 4.5 Article

Evaluation of the Performance of Commercial High Temperature Superconducting Tapes for Dynamo Flux Pump Applications

ENERGIES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Electrical & Electronic

Impact of Magnet Number on the DC Output of a Dynamo-Type HTS Flux Pump

Pengbo Zhou et al.

Summary: Based on a two-dimensional segregated H-formulation finite-element method model, this study numerically investigates the impact of the number of permanent magnets (PMs) mounted on the rotor on the performance of the high-temperature superconducting flux pump. It is found that the increase in PM number does not always lead to an increase in the dc output voltage (V-DC). Instead, there is a certain threshold value, determined by the size of the PMs and the rotor, above which the dc output voltage begins to decrease continuously. Furthermore, with further increase in PM number, the dc output voltage may disappear and then increase with the opposite polarity. This phenomenon is attributed to the change in the magnetic field profile applied to the HTS stator when increasing the number of PMs, suggesting an optimal value for PM number to achieve the best performance.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2023)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design of a 60 kA Flux Pump for Fusion Toroidal Field Coils

James H. P. Rice et al.

Summary: High-temperature superconducting (HTS) magnets provide a new pathway for magnetically confined fusion energy generation. By using HTS flux pumps to generate and sustain the required multi-kA persistent currents in HTS coils, the cost and footprint of future fusion reactor designs can be significantly reduced.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

添加到收藏夹

Article Physics, Applied

Energy balance, efficiency and operational limits of the dynamo type flux pump

A. Morandi et al.

Summary: This paper investigates the energy behavior of rotating flux pumps and finds that induced currents interact with the rotating magnet(s), converting a significant part of mechanical power into Joule heating. The study also explores the operational limits of the flux pump, showing that generator operation can only be achieved within a restricted range of current and voltage, with maximum power transfer and efficiency reached in the middle of the generator range.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Review Crystallography

High Temperature Superconducting Flux Pumps for Contactless Energization

Zezhao Wen et al.

Summary: This paper summarizes the latest advances in the field of high-temperature superconducting flux pumps, clarifies their working mechanisms, commonly adopted modeling approaches, and provides objective analyses of their applicability. It also specifies the primary challenges for implementing high-temperature superconducting flux pumps and proposes suggestions for improving this wireless excitation technology.

CRYSTALS (2022)

添加到收藏夹

Article Energy & Fuels

A Numerical Study on the Energization of the Field Coils of a Full-Size Wind Turbine with Different Types of Flux Pumps

Giacomo Russo et al.

Summary: High temperature superconductivity is considered a solution for lightweight, cost-effective, and high-power wind generators. This paper assessed the viability of using HTS dynamo and rectifier flux pumps for energizing the field coils, and found that using the dynamo flux pump can significantly reduce the cooling load.

ENERGIES (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Improving the Central Magnetic Field of an HTS Magnet Using Multiple Flux Pumps

Jiafu Wei et al.

Summary: This paper investigated the method of using multiple linear-motor flux pumps to increase the central magnetic field of an HTS magnet composed of six stacking insulated YBCO double pancake coils. The study compared two different excitation methods based on linear-motor flux pumps and revealed that segmented excitation can effectively increase the maximum operation current and central magnetic field of the HTS magnet.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

添加到收藏夹

Article Physics, Applied

Artificial intelligence-based models for reconstructing the critical current and index-value surfaces of HTS tapes

Giacomo Russo et al.

Summary: This paper proposes a new approach using artificial intelligence techniques to address the problem in modelling superconductors. Different AI models, including ANN, XGBoost, and KRR, were implemented to accurately predict the critical current of high temperature superconducting tapes, with the ANN model performing the best.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Physics, Applied

Fast solution of the superconducting dynamo benchmark problem

Leonid Prigozhin et al.

Summary: In this study, a simple, accurate, and faster numerical method is proposed, which can solve the problem of high-temperature superconducting dynamos and is also applicable to problems with transport current and field-dependent critical current density.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Physics, Applied

Sensitivity analysis and machine learning modelling for the output characteristics of rotary HTS flux pumps

Zezhao Wen et al.

Summary: HTS rotary flux pumps can generate DC voltage for industrial applications, with current research focusing on experimental and simulation approaches rather than statistical models.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Two-Dimensional Model of a High-Tc Superconducting Dynamo

Leonid Prigozhin et al.

Summary: This study focused on the application of high temperature superconducting dynamos for pumping large dc currents into superconducting magnet coils. A mathematical model was proposed and two numerical methods were employed and compared for computing loop currents and electric fields induced by a dynamo rotor-mounted permanent magnet in a thin superconducting stator strip. The study found inaccuracies in the 1-D model employed in previous works under certain conditions.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

3D modeling of a superconducting dynamo-type flux pump

Asef Ghabeli et al.

Summary: The paper presents a 3D model of an HTS flux pump, which helps clarify the mechanism of the dynamo and uncover its unnoticed characteristics.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Modelling the Frequency Dependence of the Open-Circuit Voltage of a High-Tc Superconducting Dynamo

Mark D. Ainslie et al.

Summary: This study investigates the frequency dependence of a high-Tc superconducting dynamo and proposes a new explanation for the observed phenomenon. Numerical analysis utilizing a finite-element model is used to study the impact of rotation frequency and temperature on the dynamo's open-circuit DC voltage.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2021)

添加到收藏夹

Article Physics, Applied

Modeling the charging process of a coil by an HTS dynamo-type flux pump

Asef Ghabeli et al.

Summary: The high-T-c superconducting dynamo generates a DC voltage using the nonlinear resistivity of an HTS tape when exposed to a varying magnetic field. Two numerical models were used to examine the process of charging a coil by the dynamo, showing excellent agreement with an analytical method. The models captured the dynamic behavior of the charging process, including current ripples that could cause AC loss in the HTS dynamo.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Physics, Applied

Modeling of airgap influence on DC voltage generation in a dynamo-type flux pump

Asef Ghabeli et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Physics, Applied

Maximising the current output from a self-switching kA-class rectifier flux pump

Jianzhao Geng et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

An HTS NI Magnet Charged by Multiple Flux Pumps: Construction and Test of the Prototype

Xueqing Wang et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Modeling of Stator Versus Magnet Width Effects in High-Tc Superconducting Dynamos

Ratu Mataira et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Compact Linear-Motor Type Flux Pumps With Different Wavelengths for High-Temperature Superconducting Magnets

Yuntian Zhang et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Practical Estimation of HTS Dynamo Losses

Kent Hamilton et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

添加到收藏夹

Article Physics, Applied

Mechanism of the High-Tc Superconducting Dynamo: Models and Experiment

Ratu Mataira et al.

PHYSICAL REVIEW APPLIED (2020)

添加到收藏夹

Article Physics, Applied

Origin of the DC output voltage from a high-Tc superconducting dynamo

R. C. Mataira et al.

APPLIED PHYSICS LETTERS (2019)

添加到收藏夹

Article Physics, Applied

Superconducting flux pumps

T. A. Coombs

JOURNAL OF APPLIED PHYSICS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design and Performance of a Squirrel-Cage Dynamo-Type HTS Flux Pump

Kent Hamilton et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2018)

添加到收藏夹

Article Physics, Applied

A half-bridge HTS transformer-rectifier flux pump with two AC field-controlled switches

J. D. D. Gawith et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Frequency Dependent Behavior of a Dynamo-Type HTS Flux Pump

Chris W. Bumby et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Public Database of High-Temperature Superconductor Critical Current Data

Stuart C. Wimbush et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)

添加到收藏夹

Article Physics, Applied

A finite element calculation of flux pumping

A. M. Campbell

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Physics, Applied

Numerical modelling of iron-pnictide bulk superconductor magnetization

Mark D. Ainslie et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Impact of Stator Wire Width on Output of a Dynamo-Type HTS Flux Pump

Andres E. Pantoja et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Through-Wall Excitation of a Magnet Coil by an External-Rotor HTS Flux Pump

Chris W. Bumby et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2016)

添加到收藏夹

Article Physics, Applied

Origin of dc voltage in type II superconducting flux pumps: field, field rate of change, and current density dependence of resistivity

J. Geng et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2016)

添加到收藏夹

Article Physics, Applied

A flux pumping method applied to the magnetization of YBCO superconducting coils: frequency, amplitude and waveform characteristics

Lin Fu et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2016)

添加到收藏夹

Article Physics, Applied

Impact of flux gap upon dynamic resistance of a rotating HTS flux pump

Zhenan Jiang et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2015)

添加到收藏夹

Article Instruments & Instrumentation

A 1 kA-class cryogen-free critical current characterization system for superconducting coated conductors

N. M. Strickland et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Flux Pump for HTS Magnets

Christian Hoffmann et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.