☆ 4.6 Article

Simpler and greener preparation of an in-situ polymerized polyimide anode for lithium ion batteries

ELECTROCHIMICA ACTA (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

3D Ordered Porous Nanostructure Confers Fast Charge Transfer Rate and Reduces the Electrode Polarization in Thick Electrode

Shengxuan Lin et al.

Summary: By fabricating a 3D ordered interconnected nanostructure in the electrode, electrode polarization in lithium batteries with high electrode thickness can be reduced, leading to improved performance. The nitrogen-doped carbon photonic crystal (NCPC) with the nanostructure allows for fast charge transfer rate and uniform distribution of electrons and lithium ions, diminishing concentration polarization and gradient.

SMALL (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of Various Components on Time-Dependent Rheological Behavior of Cathode Slurries for Lithium-Ion Batteries

Bin Zhao et al.

Summary: The study demonstrates the significant impact of carbon black, polymeric binders, and active material on the rheological properties of slurry, with viscosity increasing with the content of these components in steady-state tests, while yield stress only increases significantly with carbon black and polymer content. Transient tests show that increasing the content of carbon black, polymer, and active material leads to an increase in the destruction timescale and a decrease in the recovery timescale.

JOURNAL OF ELECTRONIC MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

A multifunctional polyimide enabled high performance silicon composite anode materials for Li-Ion batteries

Xiang Li et al.

Summary: In this study, a conjugate carbonyl polyimide and nano-silicon composite was designed and synthesized to address the challenges of rapid capacity fading and complicated electrode material preparation in silicon-based electrodes for lithium-ion batteries. This composite exhibited a relative high specific capacity and excellent cycling stability, as well as improved electrode kinetics and electrochemical performance.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Materials Science, Ceramics

Concentration dependence of yield stress, thixotropy, and viscoelasticity rheological behavior of lithium-ion battery slurry

Bin Zhao et al.

Summary: This study investigates the concentration-dependent rheological behaviors of electrode slurry using various methods. The results show that the increase in slurry concentration enhances the bonding strength between particles, resulting in an increase in yield stress and thixotropy. The time scale of transient behavior during the creep process decreases with the increase in concentration. Additionally, both storage and loss modulus in oscillatory shear measurement are concentration-dependent.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Physical

Understanding slurry mixing effects on the fast charging capability of lithium-ion battery cells: Methodology and case study

Korbinian Huber et al.

Summary: The slurry preparation of graphite anodes has an important influence on their performance and fast charging capability. This study introduces a method that investigates the impact of slurry preparation on electrode properties and fast charging performance using an in-situ lithium plating detection technique. The results show that high intensity mixing leads to an increased electrode tortuosity, which in turn deteriorates the fast charging performance.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Carbon coated electric arc furnace dust prepared by one-pot pyrolysis: An efficient, low carbon footprint electrode material for lithium-ion batteries

B. Deniz Karahan

Summary: This work provides insights into the evaluation of electric arc furnace dust for green energy applications by surface engineering. The carbon-coating treatment improves the performance of the dust and enables the production of low carbon footprint electrodes at a low cost. Electrochemical tests and characterization analysis show that the carbon-coated dust has high discharge capacity and can withstand high current loads, indicating its potential in energy applications.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electric potential-determined redox intermediates for effective recycling of spent lithium-ion batteries

Yunhui Hua et al.

Summary: An electrochemical approach was developed to evaluate redox abilities and a salt leaching method using water-soluble NH4Fe(SO4)(2) as a redox intermediate was proposed for the synergistic recovery of valuable metals from spent lithium-ion batteries, achieving high efficiency and selectivity.

GREEN CHEMISTRY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D Carbon-Based Porous Anode with a Pore-Size Gradient for High-Performance Lithium Metal Batteries

Hyeon-Jae Noh et al.

Summary: This study reports the development and synthesis of a 3D-carbon-based porous anode with a pore-size gradient, which enables stable Li plating/stripping without dendrite formation and achieves high coulombic efficiency. Furthermore, the use of 3D host designs for the fabrication of LMBs shows promising long-term stability and cycle performances.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Promises and Challenges of Next-Generation Beyond Li-ion Batteries for Electric Vehicles and Grid Decarbonization

Yaosen Tian et al.

Summary: The significant advancements in performance and cost of lithium-ion batteries have made them the preferred technology for electrical energy storage, but they may not meet all the requirements for large-scale applications. Hence, exploration of beyond lithium-ion technologies including sodium-ion batteries, potassium-ion batteries, all-solid-state batteries, and multivalent batteries is accelerating.

CHEMICAL REVIEWS (2021)

添加到收藏夹

Article Chemistry, Physical

An effective approach to improve electrochemical performance of thick electrodes

Kaifang Song et al.

Summary: Increasing areal active material loading by thick electrodes is an effective approach to improve the energy density of lithium-ion batteries, but may induce large polarization effects. This study demonstrates that dual-layered cathodes with CNTs and Super P can achieve high areal capacity and excellent capacity retention over cycles, providing a viable approach for improving the performance of thick electrodes.

IONICS (2021)

添加到收藏夹

Article Chemistry, Physical

TiO2 quantum dots confined in 3D carbon framework for outstanding surface lithium storage with improved kinetics

Jinpeng Yin et al.

Summary: Pseudocapacitive lithium storage using TiO2 quantum dots confined in a 3-dimensional carbon framework shows excellent electrochemical properties with high pseudocapacitance contribution and long cycling life. The obtained composites exhibit an ultra-high discharge capacity and ultra-long life, with a high capacity retention in a full cell with LiCoO2 as the cathode.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Polyimide schiff base as a high-performance anode material for lithium-ion batteries

Jun Wang et al.

Summary: The novel polyimide NBI-PI, with extended pi-conjugated naphthalene ring and Schiff-base structure, shows promising reversible capacity, rate performance, and capacity retention as an organic anode material for lithium-ion batteries.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Electrochemical Kinetic Study of a Polyimide Anode for Lithium-Ion Batteries Using the AC Impedance Technique

Yucong Liao et al.

Summary: The study investigates the electrochemical mechanisms and kinetics of a polyimide anode material for lithium-ion batteries using electrochemical impedance spectroscopy (EIS), focusing on Ohmic impedance, solid-electrolyte-interphase impedance, and charge-transfer resistance as key parameters. Results show that charge-transfer and SEI resistances are crucial factors affecting the electrochemical performance of the polyimide anode material. Increasing temperature enhances the total electrochemical kinetics of the material, improving its performance at elevated temperatures.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advances in Lithium-Sulfur Batteries: From Academic Research to Commercial Viability

Yi Chen et al.

Summary: Lithium-sulfur (Li-S) batteries, with their high energy density, show great potential as an energy storage system. Significant progress has been made in the past few decades, and there are promising prospects for the future.

ADVANCED MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Electrode Materials in Modern Organic Electrochemistry

David M. Heard et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advances in Organic Anode Materials for Na-/K-Ion Rechargeable Batteries

Aamod Desai et al.

CHEMSUSCHEM (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polyimide Surface Modification Using He-H2O Atmospheric Pressure Plasma Jet-Discharge Power Effect

Essam Abdel-Fattah et al.

COATINGS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithium Ion Battery Electrodes Made Using Dimethyl Sulfoxide (DMSO)-A Green Solvent

Ming Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent Advances on the Modulation of Electrocatalysts Based on Transition Metal Nitrides for the Rechargeable Zn-Air Battery

Xinxin Yu et al.

ACS MATERIALS LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A simple method for producing bio-based anode materials for lithium-ion batteries

William J. Sagues et al.

GREEN CHEMISTRY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-Density Planar-like Fe2N6 Structure Catalyzes Efficient Oxygen Reduction

Nan Zhang et al.

MATTER (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advances in the green chemistry of coordination polymer materials

Emile R. Engel et al.

GREEN CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

Perylenedianhydride-Based Polyimides as Organic Cathodes for Rechargeable Lithium and Sodium Batteries

Michael Ruby Raj et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electrode Materials with a Crater-Type Morphology Prepared by Electrospraying for High-Performance Lithium-Ion Batteries

Jae-Kwang Kim

CHEMSUSCHEM (2019)

添加到收藏夹

Review Multidisciplinary Sciences

Recycling lithium-ion batteries from electric vehicles

Gavin Harper et al.

NATURE (2019)

添加到收藏夹

Article Chemistry, Physical

Hierarchical multicarbonyl polyimide architectures as promising anode active materials for high-performance lithium/sodium ion batteries

Jun Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Review Chemistry, Inorganic & Nuclear

Metal-organic framework-based materials for the recovery of uranium from aqueous solutions

Weiting Yang et al.

INORGANIC CHEMISTRY FRONTIERS (2019)

添加到收藏夹

Article Environmental Sciences

Heat-treatment recycling of waste toner and its applications in lithium ion batteries

Yang Li et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Binder-induced surface structure evolution effects on Li-ion battery performance

S. J. Rezvani et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Preparation and characterization of flexible lithium iron phosphate/graphene/cellulose electrode for lithium ion batteries

Yan Wang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fluorinated Polyimide as a Novel High-Voltage Binder for High-Capacity Cathode of Lithium-Ion Batteries

Hieu Quang Pham et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Lithium-ion batteries for sustainable energy storage: recent advances towards new cell configurations

Daniele Di Lecce et al.

GREEN CHEMISTRY (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of Battery Electric Vehicle technology and readiness levels

Amin Mahmoudzadeh Andwari et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Article Engineering, Chemical

A high-temperature stable ceramic-coated separator prepared with polyimide binder/Al2O3 particles for lithium-ion batteries

Chuan Shi et al.

JOURNAL OF MEMBRANE SCIENCE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries

Brandon Ludwig et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly Adhesive and Soluble Copolyimide Binder: Improving the Long-Term Cycle Life of Silicon Anodes in Lithium-Ion Batteries

Jaecheol Choi et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Large-Area Polyimide/SWCNT Nanocable Cathode for Flexible Lithium-Ion Batteries

Haiping Wu et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent Achievements on Inorganic Electrode Materials for Lithium-Ion Batteries

Laurence Croguennec et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Towards greener and more sustainable batteries for electrical energy storage

D. Larcher et al.

NATURE CHEMISTRY (2015)

添加到收藏夹

Article Chemistry, Physical

Preparation of Sn-Co alloy electrode for lithium ion batteries by pulse electrodeposition

H. Gul et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review on structure model and energy system design of lithium-ion battery in renewable energy vehicle

Yong Li et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

添加到收藏夹

Article Environmental Sciences

Impact of materials used in lab and field experiments on the recovery of organic micropollutants

Klaus H. Hebig et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2014)

添加到收藏夹

Article Chemistry, Physical

Effect of polyimide binder on electrochemical characteristics of surface-modified silicon anode for lithium ion batteries

Jung Sub Kim et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Li-Ion Rechargeable Battery: A Perspective

John B. Goodenough et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries

Yuwon Park et al.

ADVANCED MATERIALS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

How Many Lithium Ions Can Be Inserted onto Fused C6 Aromatic Ring Systems?

Xiaoyan Han et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

添加到收藏夹

Article Chemistry, Physical

Organic Electrode Materials for Rechargeable Lithium Batteries

Yanliang Liang et al.

ADVANCED ENERGY MATERIALS (2012)

添加到收藏夹

Article Chemistry, Physical

Organic tailored batteries materials using stable open-shell molecules with degenerate frontier orbitals

Yasushi Morita et al.

NATURE MATERIALS (2011)

添加到收藏夹

Article Chemistry, Physical

Surface modification of polyimide films using unipolar nanosecond-pulse DBD in atmospheric air

Tao Shao et al.

APPLIED SURFACE SCIENCE (2010)

添加到收藏夹

Review Chemistry, Physical

Challenges for Rechargeable Li Batteries

John B. Goodenough et al.

CHEMISTRY OF MATERIALS (2010)

添加到收藏夹

Article Chemistry, Physical

Cell properties for modified PTMA cathodes of organic radical batteries

Kentaro Nakahara et al.

JOURNAL OF POWER SOURCES (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly conductive polymer anodes as replacements for inorganic materials in high-efficiency organic light-emitting diodes

Karsten Fehse et al.

ADVANCED MATERIALS (2007)

添加到收藏夹

Article Chemistry, Physical

Surface modification-based synthesis and microstructural tuning of nanocomposite layers: Monodispersed copper nanoparticles in polyimide resins

K Akamatsu et al.

CHEMISTRY OF MATERIALS (2003)

添加到收藏夹

Article Chemistry, Multidisciplinary

Formation of silver nanowires through a sandwiched reduction process

YJ Xiong et al.

ADVANCED MATERIALS (2003)

添加到收藏夹

Review Materials Science, Multidisciplinary

Inorganic materials for the negative electrode of lithium-ion batteries: state-of-the-art and future prospects

JL Tirado

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.