4.7 Article

Preparation of carbon foam from depolymerization-reforming lignin for capacitive deionization

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Embedment of graphene in binder-free fungal hypha-based electrodes for enhanced membrane capacitive deionization

Jiao Chen et al.

Summary: In this research, a freestanding and binder-free carbon electrode was developed by embedding graphene or activated carbon in the carbonized fungal hypha fibers. The embedded graphene electrode exhibited higher gravimetric electrosorption capacity and salt adsorption rate compared to the activated carbon electrode. The use of fungal hyphae derived from food waste makes the electrode fabrication technique highly scalable for large-scale capacitive deionization (CDI) applications.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Engineering, Chemical

Green synthesis of high N-doped hierarchical porous carbon nanogranules with ultra-high specific surface area and porosity for capacitive deionization

Hua Qiang et al.

Summary: A sustainable CO(NH2)2-C6H5O7(NH4)3-co-assisted C6H5K3O7 (UA-co-assisted P) self-activation strategy was developed to prepare high N-doped hierarchical porous carbon (HNHPC) with ultrahigh BET surface area (SBET) and pore volume (Vpore). The resulting HNHPCPUA showed excellent properties and demonstrated great potential in desalination applications.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Agricultural Engineering

Removal of heavy metals from aqueous solutions by high performance capacitive deionization process using biochar derived from Sargassum hemiphyllum

Quoc-Minh Truong et al.

Summary: Capacitive deionization (CDI) is an efficient, energy-saving and environmentally friendly technology for water treatment. This study investigated the use of biochar derived from brown algae as CDI electrode material for the removal of Cu(II) from aqueous solutions. The results showed that the optimal pyrolysis temperature was 700 degrees C, and the biochar exhibited excellent electrosorption capacity for Cu(II) and other heavy metals. It also maintained a high Cu(II) removal efficiency in repeated cycles and demonstrated great applicability for water treatment.

BIORESOURCE TECHNOLOGY (2023)

Article Chemistry, Multidisciplinary

Lignin derived porous carbon with favorable mesoporous contributions for highly efficient ionic liquid-based supercapacitors

Jia Liu et al.

Summary: This study investigates the potential of lignin-derived porous carbon materials for supercapacitors. By utilizing a template method, porous carbon materials with desirable mesoporous contributions were designed. These materials exhibit a three-dimensional interconnected network, large specific surface area, and favorable pore size distribution, allowing for accelerated ion and electron mass transfer. Additionally, they feature high electrochemical stability. The resulting electrode demonstrates high capacitance, superior rate performance, and impressive cycle life in ionic liquid electrolytes.

CHINESE CHEMICAL LETTERS (2023)

Article Environmental Sciences

Towards attaining SDG 6: The opportunities available for capacitive deionization technology to provide clean water to the African population

Omari Sufiani et al.

Summary: The availability of clean water in many communities in Africa is a major challenge. Capacitive deionization (CDI) technology offers a promising solution by providing water at a reasonable cost, low energy consumption, and wide applicability. This paper explores the opportunities for CDI to provide clean water to the African population, taking into account various enabling conditions.

ENVIRONMENTAL RESEARCH (2023)

Article Engineering, Environmental

Green double organic salt activation strategy for one-step synthesis of N-doped 3D hierarchical porous carbon for capacitive deionization

Mingxing Shi et al.

Summary: This study develops a green double organic salt activation strategy for fabricating high-performance CDI desalination using lotus stem. The resulting 3DNHPC exhibits a suitable porous structure and abundant surface active sites, showing excellent salt removal capability and adsorption capacity, as well as maintaining high stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Nanoscience & Nanotechnology

Tailoring the Structure of Chitosan-Based Porous Carbon Nanofiber Architectures toward Efficient Capacitive Charge Storage and Capacitive Deionization

Laszlo Szabo et al.

Summary: The study focuses on the relationship between the structure and electrochemical performance of porous carbon nanofibers (PCNFs) derived from the biobased building block chitosan. The researchers found that by varying the amount and molecular weight of the sacrificial pore-forming polymer, they could tailor the structure of the PCNFs to have a high surface area and hierarchical pore network, resulting in fast ion diffusion, high specific capacitance, and rate capability. The chitosan-based materials demonstrated high stability and charge efficiency, making them promising for use in charge storage devices.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Environmental

3D interconnected network architectures assembled from W18O49 and Ti3C2 MXene with excellent electrochemical properties and CDI performance

Jie Liang et al.

Summary: In this study, a stable three-dimensional interconnected network electrode material composed of W18O49 and Ti3C2 was synthesized. The electrode material showed high specific surface area, fast ion diffusion, and dual pseudocapacitance effect, resulting in excellent salt adsorption capacity, capacitance, and cycling stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Green & Sustainable Science & Technology

Electro-adsorption of Sr(II) from aqueous solution by activated carbon cloth/nickel hexacyanoferrate composite electrode through capacitive deionization

Xiaojing Liu et al.

Summary: The activated carbon cloth/nickel hexacyanoferrate (ACC/NiHCF) electrode was synthesized successfully and evaluated comprehensively as a CDI electrode material for Sr2+ removal. The electrode had a mesoporous and coordination framework structure, providing convenient transport channels for ions or electrons and exhibiting high removal efficiency.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Engineering, Environmental

Reconfiguring the interface charge of Co@Carbon polyhedron for enhanced capacitive deionization

Zehao Zhang et al.

Summary: In this study, the Co-metal organic framework (ZIF-67) was used as a template to prepare 3D mesoporous Co@carbon polyhedron (Co@CP) for capacitive deionization (CDI) anodes, resulting in improved salt removal capacity. The optimized Co@CP exhibited large pore volume, high degree of graphitization, and large specific surface area, with the highest desalination capacity reaching 47.8 mg/g.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Chemical

Ultrasonic-assisted fungi modification of lignocellulose-derived hierarchical porous carbon for efficient desalination

Yaqi Wu et al.

Summary: This article reports a novel strategy of ultrasonic-fungi pretreatment of lignocellulose to obtain biomass-based hierarchical porous carbon. The fabricated electrode based on this carbon material exhibits high conductivity, rapid ion transport properties, and high adsorption capacity, making it suitable for practical application in CDI. This work emphasizes the importance of sustainable development and green environmental protection.

DESALINATION (2022)

Article Engineering, Environmental

Surface Electrochemistry of Carbon Electrodes and Faradaic Reactions in Capacitive Deionization

Jin Soo Kang et al.

Summary: This article thoroughly investigates the surface electrochemistry of carbon electrodes and the Faradaic reactions responsible for the stability issues in capacitive deionization (CDI) systems. By using bare and membrane CDI as model systems, the authors identified various electrochemical reactions of carbon electrodes with water or oxygen, and constructed a complete overview of the Faradaic reactions occurring in CDI.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Wood-Based Self-Supporting Nanoporous Three-Dimensional Electrode for High-Efficiency Battery Deionization

Wenfei Wei et al.

Summary: In this study, a highly efficient wood-based BDI electrode was fabricated for seawater desalination. By tuning the redox-active sites and nanoporous structure, the wood electrode showed excellent ion removal capacity. This work demonstrated a novel resource utilization pathway of converting cheap biomass into highly efficient seawater desalination electrodes.

NANO LETTERS (2022)

Article Engineering, Environmental

Lignin-derived carbon nanofibers with the micro-cracking structure for high-performance capacitive deionization

Chun -Ping Li et al.

Summary: Lignin, as a carbon precursor, can be used to produce high-performance capacitive deionization electrode materials. This study prepares nanofibers with mesoporous fracture structure from depolymerized lignin, improving ion storage and adsorption performance, and providing a simple and efficient strategy for lignin-based carbon fiber conversion.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Article Nanoscience & Nanotechnology

Enhanced Salt Removal Performance Using Graphene-Modified Sodium Vanadium Fluorophosphate in Flow Electrode Capacitive Deionization

Yiran Sun et al.

Summary: Using NVOPF@rGO as the cathode and activated carbon as the anode, better electrode dispersibility and stability, lower internal resistance, higher desalination rate, and lower energy consumption were achieved in FCDI compared to an activated carbon-activated carbon system. The study adjusted the electrode concentration, electrode flow rate, and operation voltage to achieve an average salt adsorption rate of 5.32 μg·cm(-2)·min(-1).

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Two-Dimensional MXene-Polymer Heterostructure with Ordered In-Plane Mesochannels for High-Performance Capacitive Deionization

Qian Li et al.

Summary: The study introduces a novel 2D Ti3C2Tx MXene-polydopamine heterostructure with ordered in-plane mesochannels, which exhibits high-performance characteristics as an electrode material for capacitive deionization (CDI).

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Effect of pyrrolic-N defects on the capacitance and magnetization of nitrogen-doped multiwalled carbon nanotubes

Roque Sanchez-Salas et al.

Summary: Heteroatoms, particularly nitrogen, in multiwalled carbon nanotubes significantly influence their distribution and physicochemical properties. X-ray photoelectron spectroscopy revealed maximal nitrogen content in the second high-temperature zone of the reactor, with predominance of pyrrolic-N doping. The increase in I-D/I-G ratio in Raman spectroscopy indicates the presence of defective graphitic material.

CARBON (2021)

Article Green & Sustainable Science & Technology

Effective and continuous removal of Cr(VI) from brackish wastewater by flow-electrode capacitive deionization (FCDI)

Yi Dong et al.

Summary: This study demonstrated the effectiveness of utilizing flow-electrode capacitive deionization (FCDI) for continuous removal of Cr(VI) from brackish wastewaters, highlighting the preferential removal of Cr(VI) compared to Cl- and the varying removal behaviors between Cr(VI) and Cl-. Results also indicated the favorable impact of factors such as current density, HRT, activated carbon loading, and initial pH on the removal of Cr(VI). Additionally, inhibitory effects of different coexisting anions, especially carbonate species, were identified.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Electrochemistry

Lignin-derived Porous and Microcrystalline Carbon for Flow-Electrode Capacitive Deionization

Hai Deng et al.

Summary: Porous carbon prepared by KOH activation of alkali lignin exhibits high specific capacitance and salt adsorption capacity, making it suitable for use in capacitive deionization systems to effectively remove salt from solutions.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2021)

Article Engineering, Environmental

Selective Capacitive Removal of Heavy Metal Ions from Wastewater over Lewis Base Sites of S-Doped Fe-N-C Cathodes via an Electro-Adsorption Process

Minlin Mao et al.

Summary: The highly efficient selective capacitive removal of heavy metal ions from complex wastewater was successfully achieved through electro-adsorption on Lewis base sites of S-doped Fe-N-C cathodes. The removal efficiency can reach up to 99%, demonstrating a promising new approach for heavy metal ion removal in wastewater.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Review Chemistry, Multidisciplinary

Recent Advances in Faradic Electrochemical Deionization: System Architectures versus Electrode Materials

Yong Liu et al.

Summary: Traditional carbon-based CDI systems have low desalination capacity, and research has shifted towards the development of faradic electrochemical desalination systems using faradic materials. Focus is primarily on faradic reactions and materials, yet the correlation between faradic materials and system architectures remains relatively unexplored.

ACS NANO (2021)

Article Engineering, Environmental

Capacitive Removal of Fluoride Ions via Creating Multiple Capture Sites in a Modulatory Heterostructure

Guizhi Wang et al.

Summary: This study demonstrates the capacitive removal of F- ions by creating multiple capture sites in a modulatory heterostructure, achieving exceptional removal efficiency and good regeneration ability. The removal mechanisms of F- ions were investigated by in situ Raman, in situ X-ray diffraction, and ex situ X-ray photoelectron spectroscopy measurements, leading to a deep understanding of the process and offering a new pathway for efficient removal of F- ions from wastewater.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Agricultural Engineering

Lignin-based electrodes for energy storage application

Huayu Liu et al.

Summary: Lignin, as the second most abundant organic polymer in nature, has shown promising potential for energy storage applications due to its low cost, high carbon content, and plentiful functional groups. Recent research has focused on the design and fabrication of lignin-based electrode materials, providing new material options for supercapacitors and batteries.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Article Chemistry, Multidisciplinary

Sustainable development of ultrathin porous carbon nanosheets with highly accessible defects from biomass waste for high-performance capacitive desalination

Silu Huo et al.

Summary: A sustainable method was developed to produce highly accessible defect-rich carbon nanosheets, overcoming traditional issues of environmental pollution and energy consumption. The resulting carbon materials with ultrathin layered and hierarchically porous structures effectively improve ion storage performance, demonstrating excellent performance for capacitive deionization technology.

GREEN CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Graphene-carbon 2D heterostructures with hierarchically-porous P,N-doped layered architecture for capacitive deionization

Jingru Guo et al.

Summary: Through the assembly of metal-organic framework nanoparticles, a hierarchically porous N,P-doped carbon-graphene 2D heterostructure (NPC/rGO) with outstanding deionization performance was fabricated, exhibiting superior performance compared to the commercial benchmark and most previously reported carbon materials in capacitive deionization applications.

CHEMICAL SCIENCE (2021)

Review Chemistry, Multidisciplinary

A Critical Review on Functionalization of Air-Cathodes for Nonaqueous Li-O2 Batteries

Moran Balaish et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Engineering, Environmental

Trace-Fe-Enhanced Capacitive Deionization of Saline Water by Boosting Electron Transfer of Electro-Adsorption Sites

Guizhi Wang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

The structure of copper ferrite prepared by five methods and its catalytic activity on lignin oxidative degradation

Zhihui Ye et al.

MATERIALS RESEARCH EXPRESS (2020)

Review Engineering, Environmental

Recent advances in the fabrication and application of biopolymer-based micro- and nanostructures: A comprehensive review

Malgorzata Stanisz et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Green & Sustainable Science & Technology

The rational design of biomass-derived carbon materials towards next-generation energy storage: A review

Zongyuan Zhu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Engineering, Chemical

Developing self-activated lignosulfonate-based porous carbon material for ethylene adsorption

Szu-Han Wang et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Article Chemistry, Multidisciplinary

Sustainable lignin-derived hierarchically porous carbon for capacitive deionization applications

Saowaluk Chaleawlert-umpon et al.

NEW JOURNAL OF CHEMISTRY (2020)

Review Chemistry, Multidisciplinary

Selectively transform lignin into value-added chemicals

Qingqing Mei et al.

CHINESE CHEMICAL LETTERS (2019)

Review Agricultural Engineering

Lignin materials for adsorption: Current trend, perspectives and opportunities

Nontipa Supanchaiyamat et al.

BIORESOURCE TECHNOLOGY (2019)

Article Engineering, Environmental

Membrane-Free Hybrid Capacitive Deionization System Based on Redox Reaction for High-Efficiency NaCl Removal

Shiyong Wang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Chemistry, Physical

From Waste to Wealth: From Kraft Lignin to Free-standing Supercapacitors

Philipp Schlee et al.

CARBON (2019)

Article Chemistry, Multidisciplinary

A Simple Route to Porous Graphene from Carbon Nanodots for Supercapacitor Applications

Volker Strauss et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Applied

Recent advances in oxidative valorization of lignin

Ruoshui Ma et al.

CATALYSIS TODAY (2018)

Article Green & Sustainable Science & Technology

Activated carbon recycled from bitter-tea and palm shell wastes for capacitive desalination of salt water

P. -A. Chen et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Materials Science, Multidisciplinary

Polyvinylpyrrolidone (PVP) effects on iron oxide nanoparticle formation

Kyungah Seo et al.

MATERIALS LETTERS (2018)

Article Chemistry, Physical

Electrochemical supercapacitor performance of boron and nitrogen co-doped porous carbon nanowires

Zhichao Zhao et al.

JOURNAL OF POWER SOURCES (2018)

Review Biochemical Research Methods

Opportunities and challenges in biological lignin valorization

Gregg T. Beckham et al.

CURRENT OPINION IN BIOTECHNOLOGY (2016)

Article Chemistry, Physical

Hierarchically porous and heteroatom doped carbon derived from tobacco rods for supercapacitors

Yong-Qing Zhao et al.

JOURNAL OF POWER SOURCES (2016)

Article Energy & Fuels

A metal-organic framework-derived bifunctional oxygen electrocatalyst

Bao Yu Xia et al.

NATURE ENERGY (2016)

Article Chemistry, Multidisciplinary

Metal-organic framework-derived porous carbon polyhedra for highly efficient capacitive deionization

Yong Liu et al.

CHEMICAL COMMUNICATIONS (2015)

Article Electrochemistry

Porous carbon spheres via microwave-assisted synthesis for capacitive deionization

Yong Liu et al.

ELECTROCHIMICA ACTA (2015)

Article Chemistry, Multidisciplinary

Water desalination via capacitive deionization: what is it and what can we expect from it?

M. E. Suss et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Multidisciplinary

Controlling Porosity in Lignin-Derived Nanoporous Carbon for Supercapacitor Applications

Ju-Won Jeon et al.

CHEMSUSCHEM (2015)

Review Chemistry, Physical

H- and J-Aggregate Behavior in Polymeric Semiconductors

Frank C. Spano et al.

ANNUAL REVIEW OF PHYSICAL CHEMISTRY, VOL 65 (2014)

Review Multidisciplinary Sciences

Lignin Valorization: Improving Lignin Processing in the Biorefinery

Arthur J. Ragauskas et al.

SCIENCE (2014)

Review Materials Science, Multidisciplinary

Review on the science and technology of water desalination by capacitive deionization

S. Porada et al.

PROGRESS IN MATERIALS SCIENCE (2013)

Article Chemistry, Multidisciplinary

C-C or C-O Bond Cleavage in a Phenolic Lignin Model Compound: Selectivity Depends on Vanadium Catalyst

Susan K. Hanson et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Article Engineering, Environmental

Mesoporous Carbon for Capacitive Deionization of Saline Water

C. Tsouris et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)

Article Biochemistry & Molecular Biology

Macromolecular replication during lignin biosynthesis

Yi-ru Chen et al.

PHYTOCHEMISTRY (2010)

Review Multidisciplinary Sciences

Science and technology for water purification in the coming decades

Mark A. Shannon et al.

NATURE (2008)

Article Engineering, Environmental

Production of granular activated carbon from waste walnut shell and its adsorption characteristics for Cu2+ ion

JW Kim et al.

JOURNAL OF HAZARDOUS MATERIALS (2001)