☆ 4.7 Article

Intelligent monitoring of concrete-rock interface debonding via ultrasonic measurement integrated with convolutional neural network

CONSTRUCTION AND BUILDING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Monitoring the curing process of in-situ concrete with piezoelectric-based techniques - A practical application

Zi Sheng Tang et al.

Summary: This study presents the first field application of electromechanical impedance (EMI) and wave propagation (WP) techniques for monitoring concrete curing, using smart aggregate (SA) sensors. The results obtained from EMI and WP techniques were consistent and comparable to destructive compression and non-destructive ultrasonic pulse velocity (UPV) tests. The study also presents semi-analytical models for quantifying the compressive strength and modulus of elasticity of concrete at different curing durations.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2023)

添加到收藏夹

Article Engineering, Mechanical

On the explainability of convolutional neural networks processing ultrasonic guided waves for damage diagnosis

L. Lomazzi et al.

Summary: This study explores the application of an explainable framework to interpret the predictions of convolutional neural networks for damage diagnosis using ultrasonic guided waves. By scoring and aggregating piezoelectric devices, the reliability of damage diagnosis is improved. The capabilities of the explainable algorithm are demonstrated through a realistic numerical case study, revealing hidden features of ultrasonic guided waves related to damage.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Instruments & Instrumentation

Bonding performance monitoring between CFRP and timber column interfaces based on piezoelectric ceramics

Wenwei Yang et al.

Summary: To solve the problem of the difficulty in directly measuring the bond strength between carbon fibre reinforced polymer (CFRP) composite material and timber column during the process of strengthening, a real-time monitoring method based on piezoelectric ceramic active sensing is proposed to determine the bond strength through the structural response signal. Fifteen specimens were designed for testing and the monitoring signals were analyzed using wavelet packets, power spectral density, and short-time Fourier transform. It was found that the amplitude and power spectral density of the signals increased with the reinforcement time. The mapping relationship between wavelet packet energy and bond strength was obtained, providing a more efficient and robust way to monitor the bond strength between CFRP and timber columns during reinforcement.

SMART MATERIALS AND STRUCTURES (2023)

添加到收藏夹

Article Instruments & Instrumentation

Monitoring mechanical behaviors of CLT connections under reciprocating loading based on PZT-enabled active sensing and machine learning algorithms

Weihang Gao et al.

Summary: Monitoring the mechanical behaviors of cross-laminated timber (CLT) connections is crucial for assessing the condition of timber structures. Previous research has shown that Lead Zirconate Titanate (PZT)-enabled active sensing approaches are effective for monitoring structural health under monotonic loads, but their effectiveness under reciprocating loads needs further investigation. This study proposes an innovative method that integrates PZT-enabled active sensing and eight machine learning (ML) approaches to monitor the mechanical behaviors of CLT connections under reciprocating loading. Cyclic loading tests demonstrate the superior capabilities of the proposed method compared to conventional PZT-enabled active sensing approaches.

SMART MATERIALS AND STRUCTURES (2023)

添加到收藏夹

Article Materials Science, Characterization & Testing

Automatic defect depth estimation for ultrasonic testing in carbon fiber reinforced composites using deep learning

Xiaoying Cheng et al.

Summary: This work proposes an automatic signal classification method based on deep learning for depth estimation of low-velocity impact (LVI) damage in carbon fiber reinforced plastics (CFRPs). Three types of neural networks, LSTM, CNN, and CNNLSTM, are used to analyze the attributes at different depths and identify the depth information of impact damage. The results show that the CNN-LSTM model is more accurate in-depth classification for LVI defects in CFRP based on A-scan signals compared to the other two structures.

NDT & E INTERNATIONAL (2023)

添加到收藏夹

Article Construction & Building Technology

Detection of delamination and rebar debonding in concrete structures with ultrasonic SH-waveform tomography

Ruoyu Chen et al.

Summary: This paper presents a novel application of 2D fullwaveform inversion of ultrasonic SH-waves for detection of delamination and rebar debonding in concrete structures, providing accurate location and characterization of delaminations and identification of rebar debonding. The SH-FWI method offers clearer structural images with more detailed information compared to traditional techniques such as SAFT.

AUTOMATION IN CONSTRUCTION (2022)

添加到收藏夹

Article Construction & Building Technology

High spatial resolution imaging for damage detection in concrete based on multiple wavelet decomposition

Weihang Gao et al.

Summary: An improved DAS imaging method based on multiple wavelet decomposition is proposed in this paper, which can achieve high spatial resolution imaging for damage detection through signal post-processing and adjust the spatial resolution by changing the number of utilized mother wavelets.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Uniaxial stress identification of steel components based on one dimensional-CNN and ultrasonic method

Lu Deng et al.

Summary: This study proposes a new method based on deep learning and ultrasonic technique to obtain the absolute stress of steel components with different thicknesses. The method collects ultrasonic signals of steel components under different stress levels, builds datasets, and determines the optimal architecture of a one-dimensional convolutional neural network for stress identification. The results show that the proposed method achieves an average stress identification error of 3.83% for unknown test datasets, overcoming the drawbacks of traditional techniques and providing useful references for stress identification of steel components in practical engineering.

MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Civil

Deep learning-based autonomous damage-sensitive feature extraction for impedance-based prestress monitoring

Thanh-Truong Nguyen et al.

Summary: In this study, a deep learning-based autonomous feature extraction approach is proposed for impedance-based damage monitoring. By developing a 1-dimensional convolutional neural network model, the optimal features of prestress-loss in beams can be automatically extracted and learned. Experimental results show that this method can accurately estimate the severity of prestress loss.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Developing a heterogeneous ensemble learning framework to evaluate Alkali-silica reaction damage in concrete using acoustic emission signals

Li Ai et al.

Summary: This paper develops an automatic ASR monitoring and evaluation approach by leveraging acoustic emission (AE) and a heterogeneous ensemble learning framework. Experimental results show that the proposed method can accurately classify AE signals into different ASR phases.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

An innovative deep neural network-based approach for internal cavity detection of timber columns using percussion sound

Lin Chen et al.

Summary: Timber structures have been a dominant form of construction historically, but are susceptible to termite damages causing internal cavities. This study proposes a deep neural network-based approach using percussion sound for internal cavity detection in timber columns, showing high accuracy and generality across different conditions, suggesting great potential for field applications.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2022)

添加到收藏夹

Article Instruments & Instrumentation

Interface damage monitoring of assembled GFRP-UHPC composite beams using piezoelectric smart aggregate

Hui Qian et al.

Summary: The combination of glass fiber reinforced plastic (GFRP) and ultra-high performance concrete (UHPC) in a new composite beam for ocean engineering improves durability. Prefabricated construction technology and piezoelectric smart aggregate monitoring effectively assess the interface damage level of composite beams.

SMART MATERIALS AND STRUCTURES (2022)

添加到收藏夹

Article Construction & Building Technology

Deep long short-term memory (LSTM) networks for ultrasonic-based distributed damage assessment in concrete

Iman Ranjbar et al.

Summary: This paper presents a deep learning approach for ultrasonic-based distributed damage assessment in concrete, demonstrating its effectiveness and reliability through experiments. The use of time series of ultrasonic response signals as the input for LSTM models outperforms the idea of using manually extracted features for evaluating concrete damage.

CEMENT AND CONCRETE RESEARCH (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

Monitoring of concrete curing using the electromechanical impedance technique: review and path forward

Yee Yan Lim et al.

Summary: This article introduces the monitoring of early-age concrete strength development using piezoelectric-based electromechanical impedance technique, which has the potential to be developed into an autonomous, remote monitoring system capable of predicting the strength development of concrete structures in real time. The article reviews existing research, identifies key themes, and discusses critical developments and knowledge gaps in the field.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

If structure can exclaim: a novel robotic-assisted percussion method for spatial bolt-ball joint looseness detection

Furui Wang et al.

Summary: A novel percussion method was developed to detect spatial bolt looseness, achieving accurate detection of multi-bolt looseness for the first time with the use of a memory-augmented neural network. This approach effectively avoids inefficient relearning, improves detection accuracy, and preliminarily explores the potential of implementing automation applications in real industries.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Measurement and evaluation of soft soil strength development during freeze-thaw process based on electromechanical impedance technique

Chuan Zhang et al.

Summary: The research extended the applicability of the electromechanical impedance (EMI) method to monitoring the soil freeze-thaw process and strength development for the first time. Experimental results verified the effectiveness and reliability of the proposed method in monitoring the soil compressive strength development, showing promising prospects for in-situ monitoring in AGF projects.

MEASUREMENT SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Modelling of the electromechanical impedance technique for prediction of elastic modulus of structural adhesives

Zi Sheng Tang et al.

Summary: This study introduces electromechanical impedance-based finite element and analytical models for monitoring the curing process of structural adhesives. The dynamic elastic modulus of structural adhesives during curing can be determined through model updating, and semi-empirical relationships were developed to predict tensile strength from resonance frequency obtained from the electromechanical impedance technique.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

添加到收藏夹

Article Engineering, Geological

Towards concrete-rock interface shear containing similar triangular asperities

Heng Zhao et al.

Summary: The study shows that the shear behavior of the concrete-rock interface is highly dependent on the uniformity of asperity geometry, with regular asperities exhibiting more brittleness. The local lift-off of some asperities is pronounced, depending on their heights, and the redistribution of local stresses can affect the global shear behavior.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Characteristics and treatment measures of lining damage: A case study on a mountain tunnel

Chang Liu et al.

Summary: Lining damage in mountain tunnels affects the bearing capacity and service life, therefore, investigation and treatment of lining damage are crucial for safety and longevity. Through field investigation, numerical simulation, and in-situ monitoring, characteristics and treatment measures of lining damage can be understood to enhance tunnel performance.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Geological

Experimental, analytical, and finite element assessment of the shear strength of concrete-rock interfaces at different scales

Sylvain Renaud et al.

Summary: This study introduces a new analytical approach to assess the shear strength of concrete-rock interfaces, considering the effects of scale, roughness, and matching conditions. The validation results based on experimental data indicate that geometry matching conditions play a crucial role in evaluating the shear strength at concrete-rock interfaces.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

An intelligent model for the prediction of the compressive strength of cementitious composites with ground granulated blast furnace slag based on ultrasonic pulse velocity measurements

Slawomir Czarnecki et al.

Summary: In this study, the compressive strength of cementitious composite containing ground granulated blast furnace slag (GGBFS) was accurately predicted using intelligent models. The novelty of this research lies in its wide applicability, as it can be used to test structures at different time periods.

MEASUREMENT (2021)

添加到收藏夹

Article Construction & Building Technology

Vision-based autonomous bolt-looseness detection method for splice connections: Design, lab-scale evaluation, and field application

Thanh-Canh Huynh

Summary: This study introduces an autonomous vision-based bolt-looseness detection method, demonstrating high accuracy and adaptability in detecting loosened bolts in both lab-scale and real-scale joints.

AUTOMATION IN CONSTRUCTION (2021)

添加到收藏夹

Article Construction & Building Technology

Near real-time bolt-loosening detection using mask and region-based convolutional neural network

Cheng Yuan et al.

Summary: This study proposes an automatic method based on convolutional neural network to detect bolt looseness by labeling defects to each pixel in an image, from which labeled classification types, locations, and geometric information can be obtained. Experimental results demonstrate high precision and recall rates for the proposed method.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Damage identification in steel plate using FRF and inverse analysis

Samir Khatir et al.

Summary: Metaheuristic algorithms have seen significant development in recent years, with increasing applicability in engineering projects. However, differences in exploration and exploitation techniques can lead to certain algorithms being favored over others. This study focused on damage identification in steel plates using Frequency Response Function (FRF) indicators, comparing the performance of three new metaheuristic algorithms, with the HWO algorithm demonstrating superior performance in terms of convergence speed and CPU time.

FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY (2021)

添加到收藏夹

Article Construction & Building Technology

Investigations on fracture properties and analytical solutions of fracture parameters at rock-concrete interface

Wenyan Yuan et al.

Summary: The study found that the roughness degree of the rock-concrete interface significantly affects its fracture properties. As the roughness degree increases, the fracture energy, critical crack length, and double-K fracture parameters show obvious increasing tendencies, while the ratio of the unstable fracture toughness of the rock-concrete interface to concrete is much less than that of the initial fracture toughness, indicating a weaker cohesive effect compared with concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

A novel shearing fracture morphology method to assess the influence of freeze-thaw actions on concrete-granite interface

Yanjun Shen et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Instruments & Instrumentation

Interfacial debonding detection in externally bonded bfrp reinforced concrete using stress wave-based sensing approach

Cheng Yuan et al.

SMART MATERIALS AND STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion monitoring of the reinforced concrete by using the embedded annular piezoelectric transducer

Peng Liu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel method to monitor soft soil strength development in artificial ground freezing projects based on electromechanical impedance technique: Theoretical modeling and experimental validation

Chuan Zhang et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2020)

添加到收藏夹

Article Construction & Building Technology

Shaking table test on flexible joints of mountain tunnels passing through normal fault

Y. S. Shen et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)

添加到收藏夹

Article Construction & Building Technology

Seismic behaviour of tunnels: From experiments to analysis

Grigorios Tsinidis et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Applications of ultrasonic testing and machine learning methods to predict the static & fatigue behavior of spot-welded joints

N. Amiri et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Mechanics

Experimental static and dynamic response of RC beams damaged and strengthened with NSM GFRP rod

R. Capozucca et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Construction & Building Technology

Investigation on meso-debonding process of the sandstone-concrete interface induced by freeze-thaw cycles using NMR technology

Yanjun Shen et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Looseness detection in cup-lock scaffolds using percussion-based method

Furui Wang et al.

AUTOMATION IN CONSTRUCTION (2020)

添加到收藏夹

Article Construction & Building Technology

Real-time monitoring stiffness degradation of hardened cement paste under uniaxial compression loading through piezoceramic-based electromechanical impedance method

Chuan Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Monitoring early-age hydration and setting of portland cement paste by piezoelectric transducers via electromechanical impedance method

Chuan Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Mechanical behavior and constitutive model of shotcrete-rock interface subjected to heat damage and variable temperature curing conditions

Hu Yunpeng et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Debonding detection for rectangular CFST using surface wave measurement: Test and multi-physical fields numerical simulation

Hongbing Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Chemistry, Analytical

A PZT-Based Electromechanical Impedance Method for Monitoring the Soil Freeze-Thaw Process

Jicheng Zhang et al.

SENSORS (2019)

添加到收藏夹

Article Construction & Building Technology

Influence of surface roughness and hydrophilicity on bonding strength of concrete-rock interface

Yanjun Shen et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Mechanical

Development of analytical and numerical models for predicting the mechanical properties of structural adhesives under curing using the PZT-based wave propagation technique

Zi Sheng Tang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Construction & Building Technology

Parametric study and modeling of PZT based wave propagation technique related to practical issues in monitoring of concrete curing

Yee Yan Lim et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Measurement of reinforcement corrosion in concrete adopting ultrasonic tests and artificial neural network

Yidong Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Guided ultrasonic waves for detection of debonding in bars partially embedded in grout

Beata Zima et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Dominance of debonding defect of CFST on PZT sensor response considering the meso-scale structure of concrete with multi-scale simulation

Bin Xu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Construction & Building Technology

Prediction and sensitivity analysis of compressive strength in segregated lightweight concrete based on artificial neural network using ultrasonic pulse velocity

A. J. Tenza-Abril et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical investigations on fracture process zone of rock-concrete interface

W. Dong et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)

添加到收藏夹

Article Mechanics

An experimental study on crack propagation at rock-concrete interface using digital image correlation technique

Wei Dong et al.

ENGINEERING FRACTURE MECHANICS (2017)

添加到收藏夹

Article Engineering, Geological

Experimental Study of the Shear Strength of Bonded Concrete-Rock Interfaces: Surface Morphology and Scale Effect

Hussein Mouzannar et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

添加到收藏夹

Review Engineering, Geological

A Review of Seismic Damage of Mountain Tunnels and Probable Failure Mechanisms

Nishant Roy et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2017)

添加到收藏夹

Article Construction & Building Technology

Strength and stiffness of cement-treated marine dredged clay at various curing stages

Gyeong-o Kang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Engineering, Civil

Experimental study on bond performance between shotcrete and rock in a hot and humid tunnel environment

Shengai Cui et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2016)

添加到收藏夹

Article Mechanics

Vibration of RC beams with NSM CFRP with unbonded/notched circular rod damage

R. Capozucca et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Review Construction & Building Technology

Effect of temperature and humidity on the adhesion strength and damage mechanism of shotcrete-surrounded rock

Yang Tang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Review Construction & Building Technology

Elastic wave methods for NDE in concrete based on generalized theory of acoustic emission

Masayasu Ohtsu

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Engineering, Geological

Shear Strength of Partially Bonded Concrete-Rock Interfaces for Application in Dam Stability Analyses

Alexandra Krounis et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

添加到收藏夹

Article Construction & Building Technology

Damage observation and assessment of the Longxi tunnel during the Wenchuan earthquake

Haitao Yu et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Geological

Modelling of shear characteristics at the concrete-rock mass interface

Vladimir Andjelkovic et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

添加到收藏夹

Article Instruments & Instrumentation

Bond slip detection of steel plate and concrete beams using smart aggregates

Feng Qin et al.

SMART MATERIALS AND STRUCTURES (2015)

添加到收藏夹

Article Construction & Building Technology

Assessing sensitivity of impact echo and ultrasonic surface waves methods for nondestructive evaluation of concrete structures

Hoda Azari et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Engineering, Environmental

Monitoring the Soil Freeze-Thaw Process Using Piezoceramic-Based Smart Aggregate

Qingzhao Kong et al.

JOURNAL OF COLD REGIONS ENGINEERING (2014)

添加到收藏夹

Article Construction & Building Technology

Quantitative evaluation of SIBIE procedure and case studies

Masayasu Ohtsu et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Engineering, Mechanical

Active interface debonding detection of a concrete-filled steel tube with piezoelectric technologies using wavelet packet analysis

Bin Xu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

添加到收藏夹

Article Instruments & Instrumentation

Very early age concrete hydration characterization monitoring using piezoceramic based smart aggregates

Qingzhao Kong et al.

SMART MATERIALS AND STRUCTURES (2013)

添加到收藏夹

Article Engineering, Environmental

Damage to mountain tunnels related to the Wenchuan earthquake and some suggestions for aseismic tunnel construction

Tianbin Li

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2012)

添加到收藏夹

Article Construction & Building Technology

Damage evaluation in freezing and thawing test of concrete by elastic-wave methods

Masayasu Ohtsu

MATERIALS AND STRUCTURES (2011)

添加到收藏夹

Review Instruments & Instrumentation

Smart aggregates: multi-functional sensors for concrete structures - a tutorial and a review

Gangbing Song et al.

SMART MATERIALS & STRUCTURES (2008)

添加到收藏夹

Article Instruments & Instrumentation

Concrete structural health monitoring using embedded piezoceramic transducers

G. Song et al.

SMART MATERIALS & STRUCTURES (2007)

添加到收藏夹

Article Instruments & Instrumentation

Health monitoring and rehabilitation of a concrete structure using intelligent materials

G Song et al.

SMART MATERIALS & STRUCTURES (2006)

添加到收藏夹

Article Materials Science, Characterization & Testing

Wave propagation approach for NDE using surface bonded piezoceramics

S Bhalla et al.

NDT & E INTERNATIONAL (2005)

添加到收藏夹

Article Materials Science, Characterization & Testing

Stack imaging of spectral amplitudes based on impact-echo for flaw detection

M Ohtsu et al.

NDT & E INTERNATIONAL (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.