☆ 4.7 Article

Experimental study on local crack propagation of concrete under three-point bending

CONSTRUCTION AND BUILDING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Size effects on the characteristics of fracture process zone of plain concrete under three-point bending

Yuxiang Tang et al.

Summary: This paper investigates the characteristics of fracture process zone (FPZ) in plain concrete, analyzing size effects using three-point bending tests and the ESPI technique to monitor crack evolution and deformation. Through tension softening curves, a correlation between physical features and FPZ development was established, leading to an empirical tension softening model with size-independent parameters.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Mechanics

Investigation of fracture properties and size effects of mass concrete using wedge splitting tests on large specimens

Azzeddine Bakour et al.

Summary: This study presents experimental results of fracture tests on very large concrete specimens with a maximum aggregate size of 100 mm, investigating size and temperature effects. The digital image correlation (DIC) technique was used to assess fracture parameters and compare them with theoretical computed parameters based on linear elastic fracture mechanics. Cyclic splitting tests provided important conclusions regarding the evolution of fracture process zone length and critical opening displacement, validating hypotheses associated with disturbed fracture process zone theory and the size effect on fracture energy.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Construction & Building Technology

Combination of acoustic emission and digital image correlation monitoring for wedge splitting tests on large concrete specimens

Azzeddine Bakour et al.

Summary: In this study, acoustic emission and digital image correlation techniques were combined to monitor wedge splitting tests on large concrete specimens. The results showed that the cumulative acoustic energy recorded closely correlated to the cumulative fracture energy, specifically related to microcracking in the local fracture process zone. A new post-processing methodology for digital image correlation was also introduced to assess the evolution of local fracture energy and the length of the fracture process zone during the test. The boundary effects were found to only affect the length of the fracture process zone, contrary to the expectation that it would affect the evolution of local fracture energy.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Mechanics

Time-dependent crack propagation in concrete under constant loading

Hong-bo Gao et al.

Summary: This paper presents an experimental study on the fracture characteristics of concrete under constant loading, focusing on crack propagation and unstable fracture criterion. The results show that the lifetime of concrete decreases with higher constant load, and the crack propagation exhibits three stages with loading time. Moreover, the critical time of unstable fracture, as well as the critical CMOD and effective crack length, are greater under constant loading compared to static loading, and decrease with increasing constant load.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental study on fracture properties of dam concrete under post-peak cyclic loading based on DIC and acoustic emission techniques

Jingwu Bu et al.

Summary: In this study, wedge splitting tests were conducted on notched cubic specimens to investigate the fracture properties of dam concrete under post-peak cyclic loading. Acoustic emission (AE) and digital image correlation (DIC) technologies were used to monitor crack propagation. The results showed that as the loading rate increased, the peak load and stiffness degradation increased. The cumulative AE counts exhibited a step increasing trend and a Kaiser effect, decreasing during the post-peak cyclic loading procedure and increasing with higher loading rates. The AE energy and b value fluctuated notably with increasing loading rates. The strain recovery rate decreased and permanent crack increased as the loading rate increased. The effective crack length gradually and steadily increased, with a higher growth rate at higher loading rates.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Experimental investigation of mixed mode I-II fatigue crack propagation in concrete using a digital image correlation method

Mengdi Jia et al.

Summary: This paper presents an experimental study on the mixed mode I-II fatigue crack propagation in concrete. The results show that the process can be divided into three stages and the crack propagation path under static loading is similar to that under fatigue loading. The crack tip opening displacement, crack tip sliding displacement, mode I stress intensity factor, and mode II stress intensity factor are independent of the fatigue load level.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Construction & Building Technology

Experimental study on fracture behaviour of concrete after low-cycle reciprocating loading

Wenhu Zhao et al.

Summary: The study observed that reciprocating loading changes the failure pattern of concrete, causing more failures around coarse aggregates and making concrete more brittle. Under a limited number of low-cycle reciprocating loadings, concrete produces more micro-cracks or damage, resulting in earlier crack initiation, lower critical force, and smaller fracture energy.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Mechanics

Determination of concrete strength and toughness from notched 3 PB specimens of same depth but various span-depth ratios

Xiangyu Han et al.

Summary: This study provides a simple closed-form solution for determining the depth and span independent tensile strength and fracture toughness of small concrete samples with various span-depth ratios. It is suggested to consider specimen weight when the span-depth ratio is greater than 4.0 in 3 PB tests. The inclusion of fracture statistics analysis in the study adds reliability to the mean f(t) and K-IC values.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Influence of specimen geometry on fracture toughnesses of concrete based on boundary effect model

Yanhua Zhao et al.

Summary: The study found that the three different geometries of concrete specimens have little influence on fracture toughness, and the ratio of initial fracture toughness to fracture toughness remains relatively constant within a specific range of alpha0.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of coarse aggregate size distribution on fracture toughness of concrete based on boundary effect model

Yanhua Zhao et al.

Summary: The research shows that the fracture toughness of concrete is insensitive to coarse aggregate gradation and can be considered a constant. A unified value of the discrete number can be used to predict fictitious crack extension, although slightly lower for smaller average aggregate size. Additionally, the tensile strength calculated from the boundary effect model is closer to flexure tensile strength of concrete rather than splitting tensile strength.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Mechanics

Development of fracture process zone in full-graded dam concrete under three-point bending by DIC and acoustic emission

Shengtao Li et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

3D concurrent multiscale model for crack propagation in concrete

Eduardo A. Rodrigues et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Four-point bending tests for the fracture properties of concrete

Yangyang Yin et al.

ENGINEERING FRACTURE MECHANICS (2019)

添加到收藏夹

Article Engineering, Mechanical

Solving the cohesive zone model analytic function for concrete based on wedge-splitting test on a compact tension specimen

Yong-Kang Hou et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

添加到收藏夹

Article Mathematics, Applied

Extended finite element method and anisotropic damage plasticity for modelling crack propagation in concrete

M. R. Javanmardi et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2019)

添加到收藏夹

Article Construction & Building Technology

Investigations on the FPZ evolution of concrete after sustained loading by means of the DIC technique

Wei Dong et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Mechanics

Influence of sustained loading on fracture properties of concrete

Wei Dong et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Construction & Building Technology

Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete

Mohammad Karamloo et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Mechanics

Modeling tensile crack propagation in concrete gravity dams via crack-path-field and strain injection techniques

I. F. Dias et al.

ENGINEERING FRACTURE MECHANICS (2016)

添加到收藏夹

Article Engineering, Mechanical

Determination of fracture parameters in center cracked circular discs of concrete under diametral loading: A numerical analysis and experimental results

Cheng Hou et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)

添加到收藏夹

Article Mechanics

Effects of loading rates on concrete double-K fracture parameters

Shaowei Hu et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Construction & Building Technology

Evaluation of concrete fracture procedure based on acoustic emission parameters

Shaowei Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Construction & Building Technology

On fracture process zone and crack extension resistance of concrete based on initial fracture toughness

Dong Wei et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Mechanics

Dynamic fracture of concrete compact tension specimen: Experimental and numerical study

Josko Ozbolt et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

添加到收藏夹

Article Engineering, Mechanical

Numerical Method for Mixed-Mode I-II Crack Propagation in Concrete

ZhiMin Wu et al.

JOURNAL OF ENGINEERING MECHANICS (2013)

添加到收藏夹

Article Mechanics

An equivalent thickness conception for prediction of surface fatigue crack growth life and shape evolution

Peishi Yu et al.

ENGINEERING FRACTURE MECHANICS (2012)

添加到收藏夹

Article Mechanics

Determination of concrete fracture parameters based on two-parameter and size effect models using split-tension cubes

Ragip Ince

ENGINEERING FRACTURE MECHANICS (2010)

添加到收藏夹

Article Engineering, Mechanical

Effect of loading rate on crack velocities in HSC

Xiao Xin Zhang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

添加到收藏夹

Article Mechanics

Equivalent thickness conception for corner cracks

Peishi Yu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental determination of fracture parameters for crack propagation in hardening cement paste and mortar

Shilang Xu et al.

INTERNATIONAL JOURNAL OF FRACTURE (2009)

添加到收藏夹

Article Mechanics

Determination of fracture parameters for crack propagation in concrete using an energy approach

Shilang Xu et al.

ENGINEERING FRACTURE MECHANICS (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of specimen geometry on determination of double-K fracture parameters of concrete: a comparative study

Shailendra Kumar et al.

INTERNATIONAL JOURNAL OF FRACTURE (2008)

添加到收藏夹

Article Engineering, Mechanical

The in-plane and out-of-plane stress constraint factors and K-T-Tz description of stress field near the border of a semi-elliptical surface crack

Junhua Zhao et al.

INTERNATIONAL JOURNAL OF FATIGUE (2007)

添加到收藏夹

Article Mechanics

Three-dimensional stress state around quarter-elliptical corner cracks in elastic plates subjected to uniform tension loading

Bin Zhang et al.

ENGINEERING FRACTURE MECHANICS (2007)

添加到收藏夹

Article Construction & Building Technology

Wedge splitting test on fracture behaviour of ultra high strength concrete

JZ Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2004)

添加到收藏夹

Article Construction & Building Technology

Explanation of size effect in concrete fracture using non-uniform energy distribution

K Duan et al.

MATERIALS AND STRUCTURES (2002)

添加到收藏夹

Article Mechanics

An asymptotic approach to size effect on fracture toughness and fracture energy of composites

XZ Hu

ENGINEERING FRACTURE MECHANICS (2002)

添加到收藏夹

Article Engineering, Mechanical

Numerical simulation of prenotched gravity dam models

F Barpi et al.

JOURNAL OF ENGINEERING MECHANICS-ASCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.