☆ 4.7 Article

Identification of undisclosed modifiers and their effects on chemical, thermal, and microstructural properties of unaged and aged industrial high polymer-modified asphalt binders

CONSTRUCTION AND BUILDING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Relationship between microstructure and phase morphology of SBS modified bitumen with processing parameters studied using atomic force microscopy

Derya Kaya Ozdemir et al.

Summary: The aging effects of varying processing parameters, mixing time, and shear speed on SBS modified bitumen morphology and phase structure were studied using atomic force microscopy (AFM).The inclusion of SBS and varying processing parameters provide differences in topographic and phase images of bitumen, with the contrast between phases becoming more distinct with increasing mixing time and speed.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Variation of internal structure and performance of polyethylene- and polypropylene-modified bitumen during blending process

Luca Desidery et al.

Summary: The study found that the type and form of polyolefin have a significant impact on the mechanical response time of the composite material during the blending process of polyethylene, polypropylene, and bitumen. Polyethylene shows higher affinity with bitumen and produces modified bitumen with acceptable performance after blending for 210 minutes.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Construction & Building Technology

Laboratory investigation on rheological, chemical and morphological evolution of high content polymer modified bitumen under long-term thermal oxidative aging

Yu Tian et al.

Summary: Through various tests, it was found that High Content Polymer Modified Bitumen (HCPMB) exhibits different characteristics during aging compared to traditional bitumen. The degradation of polymer and oxidation of bitumen phase are the main factors affecting long-term aging, and a better developed initial polymer network leads to a slower degradation rate of polymer, extending the early stage of aging.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Analysis of asphaltenes and maltenes before and after long-term aging of bitumen

Xiaohu Lu et al.

Summary: The study shows differences in asphaltene and maltene of bitumen before and after aging, including the presence of more wax in maltene, the transfer of carbonyl and sulfoxide signals, and differences in aromaticity. The major differences are found between asphaltene and maltene in the bitumen.

FUEL (2021)

添加到收藏夹

Article Polymer Science

Effect of Waste Polyethylene and Wax-Based Additives on Bitumen Performance

Luca Desidery et al.

Summary: The practice of replacing traditional polymer modifiers with waste plastics has gained increasing interest in recent years, especially with polyethylene-based plastics showing promising potential in bitumen modification. Additionally, the chain length of waxes, the form of added waste polyethylene, and the blending protocol have critical effects on the properties of the mixture.

POLYMERS (2021)

添加到收藏夹

Article Construction & Building Technology

A novel method for determining the time-temperature superposition relationship of SBS modified bitumen: Effects of bitumen source, modifier type and aging

Zihao Chen et al.

Summary: The study investigates the factors affecting the validity of the newly proposed method for determining the time-temperature superposition relationship of SBSMB. It is found that the method is applicable to SBSMB samples prepared by different bitumen sources and modifier types, but not suitable for aged samples.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Comparison of quantitative determination for SBS content in SBS modified asphalt

Song Xu et al.

Summary: In this study, three calibration curves were established for detecting SBS content in modified asphalt, and compared the physical property method, rheological property method, and FTIR method. The results indicate that the FTIR method has the highest accuracy and correlation with SBS content, and shows many advantages compared to the other two methods.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Review Construction & Building Technology

A review of phase structure of SBS modified asphalt: Affecting factors, analytical methods, phase models and improvements

Mingyuan Chen et al.

Summary: This article reviews the changes in phase structure of SBSMA, analyzes the influencing factors, summarizes the phase structure analysis methods, and finally concludes the phase structure stability of SBSMA mixed with other materials.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Glass transitions in bituminous binders

Panos Apostolidis et al.

Summary: The inter-laboratory program investigated the phase and interphase behavior of bituminous binders using differential scanning calorimetry (DSC) to evaluate the low temperature properties. The study focused on comparing the glass transition temperature (T-g) measured by conventional temperature linear-DSC (TL-DSC) and temperature modulation-DSC (TM-DSC) methods, and found that the modification by 7.5% SBS resulted in a decrease of T-g, reflecting the positive influence of SBS at low temperatures.

MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Composition and Oxidation Dependence of Glass Transition in Epoxy Asphalt

Panos Apostolidis et al.

Summary: The study evaluates the glass transition behavior of epoxy asphalt using differential scanning calorimetry after different oxidative aging periods, emphasizing the composition dependence of the glass transition in epoxy asphalt binders. The results could aid in selecting the epoxy proportion in asphalt for developing super-durable and long-lasting pavement materials.

TRANSPORTATION RESEARCH RECORD (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

A Review on Bitumen Aging and Rejuvenation Chemistry: Processes, Materials and Analyses

Emiliano Prosperi et al.

Summary: This paper summarizes the chemical aspects of virgin, aged, and rejuvenated bitumen in order to encourage the use of more RAP in hot mix asphalt, providing a useful overview and guiding further research in this field.

SUSTAINABILITY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Effect of Ageing on Chemical and Strength Characteristics of Nanoclay-Modified Bitumen and Asphalt Mixture

Hend Ali Omar et al.

Summary: This study investigated the effect of ageing on bitumen, before and after modification, by producing nano-clay modified bitumen and conducting various tests. The results showed that the modification of bitumen using nano-clay improved the ageing resistance of the binder, as reflected in the strength of the asphalt mixture. FTIR analysis and ITS tests further confirmed the enhancement of ageing resistance in the modified bitumen mixture.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Review Construction & Building Technology

A critical review of high polymer-modified asphalt binders and mixtures

Jhony Habbouche et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Characterizing the SBS polymer degradation within high content polymer modified asphalt using ATR-FTIR

Chuanqi Yan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Aging effects on the composition and thermal properties of styrene-butadiene-styrene (SBS) modified bitumen

Derya Kaya et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Chemical, thermophysical, rheological, and microscopic characterisation of rubber modified asphalt binder exposed to UV radiation

Mehdi Zadshir et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2020)

添加到收藏夹

Article Construction & Building Technology

Understanding bitumen ageing by investigation of its polarity fractions

Johannes Mirwald et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Investigating bitumen long-term-ageing in the laboratory by spectroscopic analysis of the SARA fractions

Johannes Mirwald et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Oxidative and Thermoreversible Aging Effects on Performance-Based Rheological Properties of Six Latin American Asphalt Binders

Max Berkowitz et al.

ENERGY & FUELS (2019)

添加到收藏夹

Article Chemistry, Physical

Aging Mechanism and Properties of SBS Modified Bitumen under Complex Environmental Conditions

Hui Wei et al.

MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Bitumen and Bitumen Modification: A Review on Latest Advances

Michele Porto et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Construction & Building Technology

Proposing a new infrared index quantifying the aging extent of SBS-modified asphalt

Chuanqi Yan et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2018)

添加到收藏夹

Article Construction & Building Technology

Low-temperature rheological and morphological characterization of SBS modified bitumen

Olli-Ville Laukkanen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Effect of recycling agents in recycled asphalt binders observed with microstructural and rheological tests

Ilaria Menapace et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evaluation of polymer-modified bitumen by image analysis using two-dimensional fast Fourier transform

Jiqing Zhu et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Review Construction & Building Technology

State of the Art Study on Aging of Asphalt Mixtures and Use of Antioxidant Additives

Okan Sirin et al.

ADVANCES IN CIVIL ENGINEERING (2018)

添加到收藏夹

Article Construction & Building Technology

The effect of freeze-thaw cycles on durability properties of SBS-modified bitumen

Tengfei Nian et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of temperature and chemical additives on the short-term ageing of polymer modified bitumen for WMA

Davide Ragni et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Construction & Building Technology

Repeatability and sensitivity of FTIR ATR spectral analysis methods for bituminous binders

Bernhard Hofko et al.

MATERIALS AND STRUCTURES (2017)

添加到收藏夹

Article Construction & Building Technology

Correlation between multiple stress creep recovery (MSCR) results and polymer modification of binder

Eric DuBois et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Review Polymer Science

Polymer modification of bitumen: Advances and challenges

Jiqing Zhu et al.

EUROPEAN POLYMER JOURNAL (2014)

添加到收藏夹

Article Construction & Building Technology

Laboratory investigation of bitumen based on round robin DSC and AFM tests

Hilde Soenen et al.

MATERIALS AND STRUCTURES (2014)

添加到收藏夹

Article Construction & Building Technology

On the microstructure of bituminous binders

Hartmut R. Fischer et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2014)

添加到收藏夹

Article Energy & Fuels

Adhesive surface characteristics of bitumen binders investigated by Atomic Force Microscopy

Asa Laurell Lyne et al.

FUEL (2013)

添加到收藏夹

Article Construction & Building Technology

Morphology of asphalts, asphalt fractions and model wax-doped asphalts studied by atomic force microscopy

A. T. Pauli et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of microstructures and ultraviolet aging properties of organo-montmorillonite/SBS modified bitumen

Henglong Zhang et al.

MATERIALS CHEMISTRY AND PHYSICS (2011)

添加到收藏夹

Article Construction & Building Technology

On the existence of wax-induced phase separation in bitumen

Alexander Schmets et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2010)

添加到收藏夹

Article Microscopy

High temperature AFM study of CAP 30/45 pen grade bitumen

M. B. De Moraes et al.

JOURNAL OF MICROSCOPY (2010)

添加到收藏夹

Article Construction & Building Technology

Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen

Shao-peng Wu et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

添加到收藏夹

Article Energy & Fuels

Infrared microscopy investigation of oxidation and phase evolution in bitumen modified with polymers

Virginie Mouillet et al.

FUEL (2008)

添加到收藏夹

Article Engineering, Environmental

Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods

Burak Sengoz et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

添加到收藏夹

Article Construction & Building Technology

Glass Transition and Phase Stability in Asphalt Binders

Pavel Kriz et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

The effect of styrene-butadiene-styrene modification on the characteristics and performance of bitumen

Klaus Stangl et al.

MONATSHEFTE FUR CHEMIE (2007)

添加到收藏夹

Article Polymer Science

A study on thermal oxidation mechanism of styrene-butadiene-styrene block copolymer (SBS)

Jianbo Xu et al.

POLYMER DEGRADATION AND STABILITY (2007)

添加到收藏夹

Article Energy & Fuels

Ordering and steric-hardening in SBS-modified bitumen

Peter Collins et al.

ENERGY & FUELS (2006)

添加到收藏夹

Article Microscopy

Bitumen morphologies by phase-detection atomic force microscopy

JF Masson et al.

JOURNAL OF MICROSCOPY-OXFORD (2006)

添加到收藏夹

Article Energy & Fuels

Thermodynamics, phase diagrams, and stability of bitumen-polymer blends

JF Masson et al.

ENERGY & FUELS (2003)

添加到收藏夹

Article Chemistry, Analytical

Direct and continuous methodological approach to study the ageing of fossil organic material by infrared microspectrometry imaging: application to polymer modified bitumen

J Lamontagne et al.

ANALYTICA CHIMICA ACTA (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.