4.7 Article

Effects and mechanisms of capric acid/silica capsule on water absorption reduction of cement paste

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Moisture diffusion in cement pastes with hydrophobic agent

Hao Zhang et al.

Summary: This paper analyzes the influence of carboxylic acid ammonium salt on the hydrophobicity of cement-based materials and investigates its effects on hydrophobicity, moisture diffusion, and hydration products through experimental methods. The results show that the addition of carboxylic acid ammonium salt increases pore volume, and proposes an analytical hydrodynamic model to analyze the relationship between pore characteristic parameters and cementitious materials permeability.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Effects of synthetic CSH-tartaric acid nanocomposites on the properties of ordinary Portland cement

Haiyan Li et al.

Summary: In this study, tartaric acid was used as a stabilizer to prepare nano CSH, and its effect on the hydration and hardening of ordinary Portland cement was investigated. The results showed that tartaric acid intercalated the interlayer regions of CSH, and its release from the nanocomposites adjusted the pore structure and enhanced the compressive strength of cement.

CEMENT & CONCRETE COMPOSITES (2022)

Review Engineering, Multidisciplinary

A review on recent advances in the fabrication and evaluation of superhydrophobic concrete

Yuanlong Wu et al.

Summary: Water penetration can lead to severe deterioration and failure of concrete structures, but superhydrophobic concrete materials have gained considerable attention for their unique waterproofing properties. This review examines the strategies for constructing superhydrophobic concrete, discusses the impact on mechanical properties, and reviews the evaluation criteria for durability performance. The remaining challenges in fabrication and application of high-performance superhydrophobic concrete are also addressed.

COMPOSITES PART B-ENGINEERING (2022)

Article Construction & Building Technology

The effects of silanized rubber and nano-SiO2 on microstructure and frost resistance characteristics of concrete using response surface methodology (RSM)

Jicun Shi et al.

Summary: The study evaluated the potential of utilizing silanized rubber powder and nano-SiO2 to develop frost-resistant concrete, with tests conducted using RSM to determine the effect of adding SR and NS on the pore structure and mechanical characteristics of the concrete, showing a synergistic effect between SR and NS.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Early hydration properties of Portland cement with lab-synthetic calcined stober nano-SiO2 particles as modifier a

Jinfeng Sun et al.

Summary: In this study, well-dispersed nano-SiO2 modifier was prepared and found to effectively enhance the hydration and compressive strength of Portland cement.

CEMENT & CONCRETE COMPOSITES (2022)

Article Green & Sustainable Science & Technology

Properties and characterization of high-performance steam-cured cement-based materials modified by phase change materials

Liping Bi et al.

Summary: The study investigated the effects of six phase change materials on the performance of steam-cured mortar, finding that incorporating proper PCMs can enhance fluidity and toughness, reduce water absorption, and extend the service life of the material.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Modification of water absorption and pore structure of high-volume fly ash cement pastes by incorporating nanosilica

Qian Huang et al.

Summary: The study found that the addition of nanosilica increased the compressive strength and reduced the water absorption of HVFAC pastes. Nanosilica could react with Portlandite to produce additional C-S-H gel, leading to the hydration of a higher content of fly ash.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Thermodynamics

Silica fume/capric acid-stearic acid PCM included-cementitious composite for thermal controlling of buildings: Thermal energy storage and mechanical properties

Gokhan Hekimoglu et al.

Summary: In this study, a novel kind of cement mortar was produced with thermal energy storing/releasing properties by incorporating CA-SA eutectic PCM and SF to form FSC-PCM. The FSC-PCM showed great stability in terms of thermal properties, chemical structure, and cycling reliability. Replacement of OCM with FSC-PCM in different weight fractions resulted in improved thermoregulation performance in indoor environments, demonstrating potential for energy savings in buildings.

ENERGY (2021)

Article Construction & Building Technology

Rational application of nano-SiO2 in cement paste incorporated with silane: Counterbalancing and synergistic effects

Jingxian Yang et al.

Summary: The study found that nano-silica can counterbalance the retarding effect of silane on cement hydration and early strength development, and the dispersing effect of silane on nano-silica has a positive impact on the flowability of cement paste; the synergistic enhancement effects of nano-silica and silane on water resistance of cement paste result in remarkable 3D superhydrophobic behavior and lower water absorption rate.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Study on alkylsilane-incorporated cement composites: Hydration mechanism and mechanical properties effects

Mingjun Xie et al.

Summary: The length of alkyl chain in silanes affects the hydration process and mechanical properties of cement, with shorter chain resulting in stronger retardation of hydration. Changes in porosity due to silane incorporation may also contribute to the decrease in mechanical properties. Additionally, SEM images reveal the formation of fiber-like needle products on the surface of hydrated cement, which are likely composed of specific types of silanes produced from the reaction between calcium hydroxide and silane.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Enabling high-strength cement-based materials for thermal energy storage via fly-ash cenosphere encapsulated phase change materials

Adam L. Brooks et al.

Summary: The research explores a novel micro-encapsulation pathway, using fly-ash cenosphere to encapsulate PCMs for high volume use in cement-based materials, conducts a comparative study on the effects of cenosphere encapsulated PCMs and its polymer micro-encapsulated counterparts on functionalized cement-based materials, and develops a model to predict material properties.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Recent progress of hydrophobic cement-based materials: Preparation, characterization and properties

Hao Yao et al.

Summary: This paper provides a comprehensive review on the latest advances of hydrophobic cement-based materials, including assessment methods, modification strategies, and effects on durability and mechanical properties. Key scientific problems and challenges in this field are concluded, with future research directions proposed.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Multidisciplinary Sciences

Improved heavy metal immobilization of compacted clay by cement treatment

Chairat Teerawattanasuk et al.

Summary: This study demonstrates that cement treatment significantly improves the lead immobilization properties of compacted clay liners, reducing lead leaching and showing potential for managing contamination dissipation of industrial waste in landfills.

HELIYON (2021)

Article Construction & Building Technology

Mechanism of long-term capillary water uptake in cementitious materials

N. M. Alderete et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Construction & Building Technology

Predesigning matrix-directed super-hydrophobization and hierarchical strengthening of cement foam

Wei She et al.

CEMENT AND CONCRETE RESEARCH (2020)

Review Engineering, Chemical

Upconversion nano-particles from synthesis to cancer treatment: A review

Mahshid Jafari et al.

ADVANCED POWDER TECHNOLOGY (2019)

Article Construction & Building Technology

Design of SiO2/PMHS hybrid nanocomposite for surface treatment of cement-based materials

Ran Li et al.

CEMENT & CONCRETE COMPOSITES (2018)

Review Chemistry, Multidisciplinary

Nanoencapsulation of phase change materials for advanced thermal energy storage systems

E. M. Shchukina et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Construction & Building Technology

Environmental resistance of cement concrete modified with low dosage nano particles

Shujuan Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Preparation and properties of fatty acids based thermal energy storage aggregate concrete

Rui Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Chemistry, Applied

Development of water-repellent cement mortar using silane enriched with nanomaterials

Karthick Subbiah et al.

PROGRESS IN ORGANIC COATINGS (2018)

Article Construction & Building Technology

A comparative study on corrosion behavior of rebar in concrete with fatty acid additive as phase change material

Kemal Cellat et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Review Chemistry, Multidisciplinary

Colloidal capsules: nano- and microcapsules with colloidal particle shells

Tobias Bollhorst et al.

CHEMICAL SOCIETY REVIEWS (2017)

Article Construction & Building Technology

Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials

Amitha Jayalath et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Effect of sample conditioning on the water absorption of concrete

Javier Castro et al.

CEMENT & CONCRETE COMPOSITES (2011)

Article Chemistry, Physical

Fabrication and performances of microencapsulated phase change materials based on n-octadecane core and resorcinol-modified melamine-formaldehyde shell

Huanzhi Zhang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2009)

Article Materials Science, Ceramics

Sol-gel matrices for controlled release:: from macro to nano using emulsion polymerisation

Christophe J. Barbe et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2008)