☆ 4.7 Article

Another look at the semi-circular bend test for the performance ranking of hot mix asphalt

CONSTRUCTION AND BUILDING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Understanding the field performance of asphalt binders in continental climates through modulated differential scanning calorimetry

Justin Sandrasagra et al.

Summary: A pavement trial in northern Ontario, Canada has revealed the significant influence of asphalt modification on pavement performance in continental climate regions. The study found that different modification types and doses can lead to differences in expected lifespan of over 15 years. Modulated differential scanning calorimetry was used to analyze the trial binders and aged residues, shedding light on the mechanisms that affect field performance. The results showed that the use of recycled engine oil bottom (REOB) tainted asphalt and high styrene-butane-styrene (SBS) content can negatively impact lifespan, while straight Cold Lake binder with 0.3% PET fiber modification performed the best with an expected lifespan of 38 years.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Construction & Building Technology

The effect of long-term aging on fatigue cracking resistance of asphalt mixtures

Shashwath Sreedhar et al.

Summary: Asphalt aging is a significant factor causing cracking failures in asphalt pavements. Due to the increasing complexity of asphalt mixture composition and interactions, relying solely on volumetric design does not result in optimal performance. Therefore, it is necessary to improve test methods for asphalt mixture performance and develop more durable mixtures.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

添加到收藏夹

Article Construction & Building Technology

Effect of recycled polyethylene terephthalate (PET) fiber on the fracture resistance of asphalt mixtures

Jianmin Ma et al.

Summary: This study systematically analyzed the effects of PET fiber and asphalt mixture properties, as well as testing conditions, on the cracking resistance of asphalt mixtures. It was found that longer and thicker PET fibers with a rough surface can significantly improve the toughness of the asphalt mixtures. The loading rate in the current test method should be reduced.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

On the sustainable use of recycled plastics in flexible asphalt pavements

Jianmin Ma et al.

Summary: Reusing plastic waste in asphalt for road construction has potential environmental and economic benefits. However, research has conflicting conclusions about its merits. This report presents test results on plastic-modified binders and mixtures, finding improved high temperature binder grades, but reduced strain tolerance in ductile failure. Modified mixes were less strain tolerant in comparison to unmodified mixes. Adjusting the base asphalt grade is proposed to accommodate more plastic and improve overall performance.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Engineering, Environmental

Lessons learned from 60 years of pavement trials in continental climate regions of Canada

Jianmin Ma et al.

Summary: This article discusses the importance of consistency, temperature sensitivity, phase homogeneity, and durability of asphalt binders in pavement performance. It is found that optimizing the binder formulation can lead to the design of longer-lasting pavements, providing substantial savings and preparing for climate change.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Construction & Building Technology

Investigation of low-temperature cracking resistance of asphalt mixtures by conducting Disc-Shaped Compact Tension (DC(T)) and Semi-Circular Bend (SCB) tests

Saeid Salehi Ashani et al.

Summary: This study focused on investigating the low-temperature cracking resistance of five plant-produced SP12.5 surface course asphalt mixtures through DC(T), SCB, and BBR tests. Results showed that DC(T) fracture energies had better relationships with the low-temperature properties of recovered asphalt binders, providing a more reliable method for evaluating the low-temperature cracking resistance of asphalt mixtures.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Development of a balanced cracking index for asphalt mixtures tested in semi-circular bending with load-LLD measurements

Hamed Majidifard et al.

Summary: A new cracking index BCI was introduced in this study, showing lower coefficient of variation and higher correlation compared to existing indices FI and CRI. BCI is driven by both fracture energy and L75 parameter, suggesting potential value in predicting cracking performance of asphaltic pavement surfaces.

MEASUREMENT (2021)

添加到收藏夹

Article Construction & Building Technology

Influence of mix design parameters on asphalt concrete aging rate using I-FIT specimens

Zehui Zhu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Development of an index to evaluate the cracking potential of asphalt mixtures using the semi-circular bending test

Fawaz Kaseer et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Comparison of low-temperature fracture and strength properties of asphalt mixture obtained from IDT and SCB under different testing configurations

Augusto Cannone Falchetto et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2018)

添加到收藏夹

Article Construction & Building Technology

Evaluation of asphalt mixture laboratory long-term ageing methods for performance testing and prediction

Michael D. Elwardany et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2017)

添加到收藏夹

Article Construction & Building Technology

Selection and preliminary evaluation of laboratory cracking tests for routine asphalt mix designs

Fujie Zhou et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2017)

添加到收藏夹

Article Construction & Building Technology

Long-term ageing of asphalt mixtures

Fan Yin et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2017)

添加到收藏夹

Article Construction & Building Technology

Investigation of proper long-term laboratory aging temperature for performance testing of asphalt concrete

Farhad Yousefi Rad et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Engineering, Civil

Development and Evaluation of Laboratory Conditioning Procedures to Simulate Mixture Property Changes Effectively in the Field

Marco Isola et al.

TRANSPORTATION RESEARCH RECORD (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Determination of Creep Compliance of Asphalt Concrete from Notched Semi-Circular Bend (SCB) Test

E. Zegeye Teshale et al.

EXPERIMENTAL MECHANICS (2013)

添加到收藏夹

Article Construction & Building Technology

Investigation of size effect in asphalt mixture fracture testing at low temperature

Eyoab Zegeye et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2012)

添加到收藏夹

Article Engineering, Civil

Simplified Viscoelastic Continuum Damage Model as Platform for Asphalt Concrete Fatigue Analysis

B. Shane Underwood et al.

TRANSPORTATION RESEARCH RECORD (2012)

添加到收藏夹

Article Engineering, Civil

Comparison of Low-Temperature Field Performance and Laboratory Testing of 10 Test Sections in the Midwestern United States

Adam Zofka et al.

TRANSPORTATION RESEARCH RECORD (2009)

添加到收藏夹

Article Energy & Fuels

Reversible aging in asphalt binders

Simon A. M. Hesp et al.

ENERGY & FUELS (2007)

添加到收藏夹

Article Psychology, Multidisciplinary

An alternative to null-hypothesis significance tests

PR Killeen

PSYCHOLOGICAL SCIENCE (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.