相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Bond between Sand-Coated GFRP Bars and Normal-Strength, Self-Compacting, and Fiber-Reinforced Concrete under Seawater and Alkaline Solution
Milad Shakiba et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2023)
Bond durability between anchored GFRP bar and seawater concrete under offshore environmental conditions
Hamidreza Kazemi et al.
MATERIALS AND STRUCTURES (2023)
Durability of tubular sea water sea sand concrete and fibre-reinforced polymer hybrid structures: Mechanisms and effective parameters: Critical overview and discussion
Benzen Benny et al.
CONSTRUCTION AND BUILDING MATERIALS (2023)
A case study on the feasibility of using static-cast fibre-reinforced concrete electric poles fully reinforced with glass fibre reinforced polymer bars and stirrups
Milad Shakiba et al.
RESULTS IN ENGINEERING (2023)
Fibre-Reinforced Polymer Reinforced Concrete Members under Elevated Temperatures: A Review on Structural Performance
Fariborz Sharifianjazi et al.
POLYMERS (2022)
Performance of glued-in rod timber joints under seawater and UV exposure cycles
Mohammad Shekarchi et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Enhancement of the bond behaviour between sand coated GFRP bar and normal concrete using innovative composite anchor heads
Milad Shakiba et al.
MATERIALS AND STRUCTURES (2022)
Residual flexural capacity of pre-cracked RC beams exposed to chloride penetration at the sea surface temperature
Masoume Hoseinzade et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Bond-slip performance of GFRP and steel reinforced beams under wet-dry and freeze-thaw cycles: The effect of concrete type
Milad Shakiba et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Enhancement of punching strength in GFRP reinforced single footings by means of handmade GFRP shear bands
Alireza Doostmohamadi et al.
ENGINEERING STRUCTURES (2022)
Using four-point flexure test to investigate effects of temperature and bar size on the tensile properties of GFRP bars
Seyed Mohammad Hosseini et al.
POLYMER TESTING (2022)
A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions
Guangyan Feng et al.
CEMENT & CONCRETE COMPOSITES (2022)
Durability of fibre-reinforced polymer-wood composite members: An overview
Milad Bazli et al.
COMPOSITE STRUCTURES (2022)
Durability of FRP bars and FRP bar reinforced seawater sea sand concrete structures in marine environments
Kaijian Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Bond-slip behaviour between GFRP/steel bars and seawater concrete after exposure to environmental conditions
Hamidreza Kazemi et al.
ENGINEERING STRUCTURES (2022)
Bond between Fibre-Reinforced Polymer Tubes and Sea Water Sea Sand Concrete: Mechanisms and Effective Parameters: Critical Overview and Discussion
Johanna Dorothea Luck et al.
FIBERS (2022)
Durability of glass-fibre-reinforced polymer composites under seawater and sea-sand concrete coupled with harsh outdoor environments
Milad Bazli et al.
ADVANCES IN STRUCTURAL ENGINEERING (2021)
Effect of mat anchorage on flexural bonding strength between concrete and sand coated GFRP bars
Milad Shakiba et al.
COMPOSITE STRUCTURES (2021)
Study on the durability of GFRP bars and carbon/glass hybrid fiber reinforced polymer (HFRP) bars aged in alkaline solution
Yunfeng Pan et al.
COMPOSITE STRUCTURES (2021)
Influence of elevated temperatures on the bond behaviour of ribbed GFRP bars in concrete
Ines C. Rosa et al.
CEMENT & CONCRETE COMPOSITES (2021)
Degradation of glass fiber reinforced polymer (GFRP) bars in concrete environment
Paulina Arczewska et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Hybrid fibre reinforced polymer and seawater sea sand concrete structures: A systematic review on short-term and long-term structural performance
Milad Bazli et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Experimental investigation of residual flexural capacity of damaged reinforced concrete beams exposed to elevated temperatures
Mohammadmahdi Esfahani et al.
ENGINEERING STRUCTURES (2021)
Bond durability of basalt-fiber-reinforced-polymer bars embedded in lightweight aggregate concrete subjected to freeze-thaw cycles
Peng Deng et al.
STRUCTURAL CONCRETE (2021)
The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment
Zhiqiang Dong et al.
ADVANCES IN STRUCTURAL ENGINEERING (2020)
Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment
Zhongyu Lu et al.
COMPOSITE STRUCTURES (2020)
Effects of UV radiation, moisture and elevated temperature on mechanical properties of GFRP pultruded profiles
Milad Bazli et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Bar size effect on long-term durability of sand-coated basalt-FRP composite bars
Ahmed H. Ali et al.
COMPOSITES PART B-ENGINEERING (2020)
Effect of polyolefin macro fibers and handmade GFRP anchorage system on improving the bonding behavior of GFRP bars embedded in self-compacting lightweight concrete
Alireza Doostmohamadi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Durability of pultruded GFRP tubes subjected to seawater sea sand concrete and seawater environments
Milad Bazli et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanical properties of pultruded GFRP profiles under seawater sea sand concrete environment coupled with UV radiation and moisture
Milad Bazli et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Strength Degradation in Curved Fiber-reinforced Polymer (FRP) Bars Used as Concrete Reinforcement
Thanongsak Imjai et al.
POLYMERS (2020)
Durability of seawater and sea sand concrete filled filament wound FRP tubes under seawater environments
Milad Bazli et al.
COMPOSITES PART B-ENGINEERING (2020)
Bond performance between FRP tubes and seawater sea sand concrete after exposure to seawater condition
Milad Bazli et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of thermal cycles on mechanical response of pultruded glass fiber reinforced polymer profiles of different geometries
Armin Jafari et al.
COMPOSITE STRUCTURES (2019)
Effect of Fibers Configuration and Thickness on Tensile Behavior of GFRP Laminates Exposed to Harsh Environment
Milad Bazli et al.
POLYMERS (2019)
Bond-slip behaviour between FRP tubes and seawater sea sand concrete (vol 178, 10758, 2019)
Milad Bazli et al.
ENGINEERING STRUCTURES (2019)
Durability performance and long-term prediction models of sand-coated basalt FRP bars
Ahmed H. Ali et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of sustained load and seawater and sea sand concrete environment on durability of basalt- and glass-fibre reinforced polymer (B/GFRP) bars
Zike Wang et al.
CORROSION SCIENCE (2018)
Theoretical model for seawater and sea sand concrete-filled circular FRP tubular stub columns under axial compression
Y. L. Li et al.
ENGINEERING STRUCTURES (2018)
Effect of Sequential Exposure to UV Radiation and Water Vapor Condensation and Extreme Temperatures on the Mechanical Properties of GFRP Bars
Hamed Ashrafi et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)
Flexural and web crippling properties of GFRP pultruded profiles subjected to wetting and drying cycles in different sea water conditions
Asghar Vatani Oskouei et al.
POLYMER TESTING (2018)
Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars
Zhiqiang Dong et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Bond Properties of FRP-concrete Interface with Nano-modified Epoxy Resin under Wet-dry Cycles
Yue Li et al.
KSCE JOURNAL OF CIVIL ENGINEERING (2017)
Experiments and probabilistic models of bond strength between GFRP bar and different types of concrete under aggressive environments
Milad Bazli et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures
Brahim Benmokrane et al.
COMPOSITES PART B-ENGINEERING (2017)
Effect of harsh environments on mechanical properties of GFRP pultruded profiles
Milad Bazli et al.
COMPOSITES PART B-ENGINEERING (2016)
Effects of moisture on the long-term performance of adhesively bonded FRP/steel joints used in bridges
Mohsen Heshmati et al.
COMPOSITES PART B-ENGINEERING (2016)
Characterization and Comparative Durability Study of Glass/Vinylester, Basalt/Vinylester, and Basalt/Epoxy FRP Bars
Brahim Benmokrane et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)
Bond strength of different strengthening systems - Concrete elements under freeze-thaw cycles and salt water immersion exposure
Firas Al-Mahmoud et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of harsh environmental conditions on the tensile properties of GFRP bars
Yousef A. Al-Salloum et al.
COMPOSITES PART B-ENGINEERING (2013)
Independent environmental effects on durability of fiber-reinforced polymer wraps in civil applications: A review
Paul Boeer et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Flexural durability of FRP bars embedded in fiber-reinforced-concrete
Huanzi Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Bond Durability of FRP Bars Embedded in Fiber-Reinforced Concrete
Abdeldjelil Belarbi et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2012)
Bond strength of CFRP-concrete elements under freeze-thaw cycles
Pierluigi Colombi et al.
COMPOSITE STRUCTURES (2010)
Wet Lay-Up Manufactured FRPs for Concrete and Masonry Repair: Influence of Water on the Properties of Composites and on Their Epoxy Components
Margherita Stefania Sciolti et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)
Temperature as an Accelerating Factor for Long-Term Durability Testing of FRPs: Should There Be Any Limitations?
Mathieu Robert et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)
Short-term durability test for GFRP rods under various environmental conditions
Hyeong-Yeol Kim et al.
COMPOSITE STRUCTURES (2008)
Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures
Yi Chen et al.
COMPOSITE STRUCTURES (2007)
FRP-confined concrete under axial cyclic compression
L. Lam et al.
CEMENT & CONCRETE COMPOSITES (2006)
Creep and durability of sand-coated glass FRP bars in concrete elements under freeze/thaw cycling and sustained loads
Kader Laoubi et al.
CEMENT & CONCRETE COMPOSITES (2006)
Durability issues of FRP rebars in reinforced concrete members
Francesca Ceroni et al.
CEMENT & CONCRETE COMPOSITES (2006)
Durability of FRP composite bridge deck materials under freeze-thaw and low temperature conditions
Hwai-Chung Wu et al.
JOURNAL OF BRIDGE ENGINEERING (2006)
Durability of FRP rods for concrete structures
F Micelli et al.
CONSTRUCTION AND BUILDING MATERIALS (2004)
Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure
VM Karbhari et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2003)
Low-temperature hygrothermal degradation of ambient cured E-glass/vinylester composites
VM Karbhari et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)