☆ 4.7 Article

Computational investigation of a 3D-printed skin substitute with orthotropy in mechanical property

COMPUTERS IN BIOLOGY AND MEDICINE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Biomedical

Computational investigation of interface printing patterns within 3D printed multilayered scaffolds for osteochondral tissue engineering

Robert Choe et al.

Summary: This study focuses on fabricating a biphasic osteochondral scaffold with improved shear properties and a mechanically strong interface using computational modeling and extrusion-based bioprinting. The researchers developed a solid mechanics model and conducted interfacial shear tests to determine the best materials for the scaffold. Hypothetical simulations were also performed to investigate the displacement properties of potential 3D printed scaffolds. The findings of this study provide valuable insights for future scaffold designs and regenerative outcomes.

BIOFABRICATION (2022)

添加到收藏夹

Article Cell & Tissue Engineering

Large full-thickness wounded skin regeneration using 3D-printed elastic scaffold with minimal functional unit of skin

Peng Chang et al.

Summary: This study demonstrated a novel tissue engineering functional skin by incorporating the minimal functional unit of skin into a 3D-printed scaffold and collagen gel. The functional skin resulted in faster wound healing and regeneration of skin appendages, providing a new strategy for large full-thickness skin wound healing.

JOURNAL OF TISSUE ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

A Process Parameter Design Method for Improving the Filament Diameter Accuracy of Extrusion 3D Printing

Kaicheng Yu et al.

Summary: This paper proposes a novel method based on experiments to control filament diameter in extrusion 3D printing, investigates the influence of process parameters and rheological properties on filament diameter, and validates the reliability of the method using PLCL as a case study.

MATERIALS (2022)

添加到收藏夹

Review Biochemistry & Molecular Biology

Three-dimensional in vitro culture models in oncology research

Camille Jubelin et al.

Summary: Cancer is a complex disease that requires multidimensional models to understand its development and drug response. Three-dimensional cell culture models, compared to traditional two-dimensional cultures, better mimic the biological behavior of tumor cells and provide a better platform for studying therapeutic escape and drug resistance.

CELL AND BIOSCIENCE (2022)

添加到收藏夹

Article Pharmacology & Pharmacy

Investigation on the Temperature Distribution Uniformity of an Extrusion-Based 3D Print Head and Its Temperature Control Strategy

Qiang Gao et al.

Summary: This study developed a novel print head configuration for extrusion-based 3D printing of thermoplastic polymers. Through numerical thermal analysis and temperature control strategy, the temperature distribution inside the print head can be accurately controlled, improving the uniformity of printed filament diameter.

PHARMACEUTICS (2022)

添加到收藏夹

Article Engineering, Biomedical

Biofabrication of endothelial cell, dermal fibroblast, and multilayered keratinocyte layers for skin tissue engineering

Natan R. Barros et al.

Summary: Current skin models are limited in emulating the multifaceted functions of skin tissues. Researchers have developed a 3D skin model with endothelial cell networks, dermal fibroblasts, and multilayered keratinocytes using biomaterial-based approaches and bioengineered techniques, with implications in the biofabrication of skin systems for regenerative medicine and disease modeling.

BIOFABRICATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printing of biomedically relevant polymer materials and biocompatibility

Joseph Rey H. Sta. Agueda et al.

Summary: Research on polymer materials for additive manufacturing in biomedical applications is promising but faces challenges related to biocompatibility. Changes during 3D printing processes can negatively impact the compatibility of the final product. This study focuses on additives and processes that affect biocompatibility during and after 3D printing of polymer materials.

MRS COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hybrid 3D Printing of Synthetic and Cell-Laden Bioinks for Shape Retaining Soft Tissue Grafts

Sarah Van Belleghem et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Engineered delivery strategies for enhanced control of growth factor activities in wound healing

Yiming Niu et al.

ADVANCED DRUG DELIVERY REVIEWS (2019)

添加到收藏夹

Article Engineering, Biomedical

Perfusable and stretchable 3D culture system for skin-equivalent

Nobuhito Mori et al.

BIOFABRICATION (2019)

添加到收藏夹

Review Biochemistry & Molecular Biology

Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication

Indong Jun et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)

添加到收藏夹

Article Biotechnology & Applied Microbiology

A 3D-Printed PLCL Scaffold Coated with Collagen Type I and Its Biocompatibility

Yong He et al.

BIOMED RESEARCH INTERNATIONAL (2018)

添加到收藏夹

Article Engineering, Biomedical

Proof-of-concept: 3D bioprinting of pigmented human skin constructs

Wei Long Ng et al.

BIOFABRICATION (2018)

添加到收藏夹

Article Engineering, Biomedical

Importance of endogenous extracellular matrix in biomechanical properties of human skin model

Flavien Pillet et al.

BIOFABRICATION (2017)

添加到收藏夹

Article Engineering, Biomedical

Direct 3D cell-printing of human skin with functional transwell system

Byoung Soo Kim et al.

BIOFABRICATION (2017)

添加到收藏夹

Article Critical Care Medicine

A 10 year epidemiological study of paediatric burns at the Welsh Centre for burns and plastic surgery

Leigh Sanyaolu et al.

BURNS (2017)

添加到收藏夹

Article Engineering, Biomedical

3D bioprinting of functional human skin: production and in vivo analysis

Nieves Cubo et al.

BIOFABRICATION (2017)

添加到收藏夹

Article Dermatology

Work-related burn injuries in Ontario, Canada: A follow-up 10-year retrospective study

Elsa Clouatre et al.

BURNS (2013)

添加到收藏夹

Review Biochemistry & Molecular Biology

UV Radiation and the Skin

John D'Orazio et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2013)

添加到收藏夹

Article Dermatology

Second-degree burns caused by exposure to sunbed with displaced filter in the facial tanner: a report of two cases

Annesofie Faurschou et al.

PHOTODERMATOLOGY PHOTOIMMUNOLOGY & PHOTOMEDICINE (2013)

添加到收藏夹

Article Engineering, Biomedical

The development of a 3D immunocompetent model of human skin

David Y. S. Chau et al.

BIOFABRICATION (2013)

添加到收藏夹

Review Multidisciplinary Sciences

A review of tissue-engineered skin bioconstructs available for skin reconstruction

Rostislav V. Shevchenko et al.

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional Culture with Stiff Microstructures Increases Proliferation and Slows Osteogenic Differentiation of Human Mesenchymal Stem Cells

John M. Collins et al.

SMALL (2010)

添加到收藏夹

Article Engineering, Biomedical

Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication

Wonhye Lee et al.

BIOMATERIALS (2009)

添加到收藏夹

Review Cell Biology

Basement membranes in skin: unique matrix structures with diverse functions?

Dirk Breitkreutz et al.

HISTOCHEMISTRY AND CELL BIOLOGY (2009)

添加到收藏夹

Article Cell & Tissue Engineering

Engineered Human Skin Fabricated Using Electrospun Collagen-PCL Blends: Morphogenesis and Mechanical Properties

Heather M. Powell et al.

TISSUE ENGINEERING PART A (2009)

添加到收藏夹

Article Engineering, Biomedical

Towards development of a dermal rudiment for enhanced wound healing response

Yolanda Garcia et al.

BIOMATERIALS (2008)

添加到收藏夹

Article Critical Care Medicine

Scald burns in young children - A review of Arizona Burn Center pediatric patients and a proposal for prevention in the Hispanic community

Ruth B. Rimmer et al.

JOURNAL OF BURN CARE & RESEARCH (2008)

添加到收藏夹

Review Dermatology

Tight junctions/adherens junctions: Basic structure and function

Carien M. Niessen

JOURNAL OF INVESTIGATIVE DERMATOLOGY (2007)

添加到收藏夹

Review Dermatology

Rational treatment of first-degree burns

E. Proksch et al.

HAUTARZT (2007)

添加到收藏夹

Article Engineering, Biomedical

Biomechanical and biochemical characteristics of a human fibroblast-produced and remodeled matrix

Jan-Eric W. Ahlfors et al.

BIOMATERIALS (2007)

添加到收藏夹

Article Polymer Science

Porous biodegradable blends of poly(L-lactic poly(ε-caprolactone):: polyester acid) and physical properties, morphology, and biodegradation

Hideto Tsuji et al.

POLYMER INTERNATIONAL (2007)

添加到收藏夹

Article Engineering, Biomedical

EDC cross-linking improves skin substitute strength and stability

Heather M. Powell et al.

BIOMATERIALS (2006)

添加到收藏夹

Article Critical Care Medicine

Ten-year Brisbane experience in petrol burns: A preventable health burden

J. Gough et al.

BURNS (2006)

添加到收藏夹

Article Dermatology

Isolation and characterization of human repetin, a member of the fused gene family of the epidermal differentiation complex

M Huber et al.

JOURNAL OF INVESTIGATIVE DERMATOLOGY (2005)

添加到收藏夹

Article Dermatology

In vivo model of the mechanical properties of the human skin under suction

S Diridollou et al.

SKIN RESEARCH AND TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.