☆ 4.7 Article

Ultra-thin composites membrane for deployable structures: XCT driven characterization and FE modeling of folding structure

COMPOSITES SCIENCE AND TECHNOLOGY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Folding Responses of Origami-Inspired Structures Connected by Groove Compliant Joints

Qian Zhang et al.

Summary: In this paper, a new type of compliant joint is designed and its performances are studied through parameter analysis and optimization, showing that it can effectively control the behavior and configuration of mechanisms. The study also finds that origami-inspired structures have a high residual stiffness.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Chemistry, Physical

Novel Deployable Panel Structure Integrated with Thick Origami and Morphing Bistable Composite Structures

Shuyong Ding et al.

Summary: This paper proposes a novel deployable panel structure that integrates a bistable composite structure and thick panel based on the thick origami technique. The trigger force and load-displacement curves of the structure are obtained through experiments and numerical simulations. Factors affecting the coverage area-to-package volume ratio and trigger force are discussed. Experimental and numerical results confirm the structure's two stable configurations and large coverage area-to-package volume ratio.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Composites

Rate dependent piezoresistive characterization of smart aerospace sandwich structures embedded with reduced graphene oxide (rGO) coated fabric sensors

Israr Ud Din et al.

Summary: This study investigates the piezoresistive performance of smart aerospace sandwich structures and finds that the piezoresistivity of the fabric sensors is inversely proportional to the loading rate. The rate dependency is more prominent in beams with larger widths and the highest decrease in piezoresistivity is found in the non-linear region.

COMPOSITES COMMUNICATIONS (2022)

添加到收藏夹

Article Mechanics

Electromechanical behavior of self-sensing composite sandwich structures for next generation more electric aerostructures

Israr Ud Din et al.

Summary: This study presents a unique design of self-sensing sandwich structure with excellent piezoresistive response, which can be used for real-time monitoring of the health status of aerospace structures. Through testing and model fitting, it was found that the piezoresistivity of the sandwich structure is related to the geometrical parameters and the position of the sensor.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Simulating flexible origami structures by finite element method

Y. C. Hu et al.

Summary: The text discusses the composition, bending, fold angle and other technical details of origami. It also describes the process of simulating and analyzing origami using finite element methods.

INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2021)

添加到收藏夹

Article Mechanics

Micro-CT based structure tensor analysis of fibre orientation in random fibre composites versus high-fidelity fibre identification methods

Radmir Karamov et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Composites

Origami-based deployable structures made of carbon fiber reinforced polymer composites

Antonio Alessandro Deleo et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

The use of X-ray computed tomography for design and process modeling of aerospace composites: A review

K. Naresh et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Mechanics

Effective bending modulus of thin ply fibre composites with uniform fibre spacing

Nastaran Nourmohammadi et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Meso-FE modelling of textile composites and X-ray tomography

N. Naouar et al.

JOURNAL OF MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sequential damage study induced in fiber reinforced composites by shear and tensile stress using a newly developed Arcan fixture

Israr Ud Din et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Composites

Harnessing architected stiffeners to manufacture origami-inspired foldable composite structures

Mae Al-Mansoori et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Civil

Predicting mechanical properties of thin woven carbon fiber reinforced laminates

H. M. Y. C. Mallikarachchi

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

XCT-scan assisted flow path analysis and permeability prediction of a 3D woven fabric

M. A. Ali et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

X-ray computed tomography characterization of manufacturing induced defects in a glass/polyester pultruded profile

Ismet Baran et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Modular assembly of soft deployable structures and robots

Wei Wang et al.

MATERIALS HORIZONS (2017)

添加到收藏夹

Article Mechanics

Prediction of linear and non-linear behavior of 3D woven composite using mesoscopic voxel models reconstructed from X-ray micro-tomography

Yang Liu et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Numerical identification of classical and nonclassical moduli of 3D woven textiles and analysis of scale effects

Y. Rahali et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Manufacturing

Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images

Ilya Straumit et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Mechanics

Internal geometric modelling of 3D woven composites: A comparison between different approaches

N. Isart et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Engineering, Manufacturing

Quantification of the internal structure and automatic generation of voxel models of textile composites from X-ray computed tomography data

Ilya Straumit et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Materials Science, Composites

Meso-level textile composites simulations: Open data exchange and scripting

Stepan V. Lomov et al.

JOURNAL OF COMPOSITE MATERIALS (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

CubeSat Deployable Antenna Using Bistable Composite Tape-Springs

Joseph Costantine et al.

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS (2012)

添加到收藏夹

Article Mechanics

Folding of fiber composites with a hyperelastic matrix

Francisco Lopez Jimenez et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

添加到收藏夹

Article Materials Science, Textiles

Modeling three-dimensional fabrics and three-dimensional reinforced composites: challenges and solutions

S. V. Lomov et al.

TEXTILE RESEARCH JOURNAL (2011)

添加到收藏夹

Review Materials Science, Composites

Meso-FE modelling of textile composites: Road map, data flow and algorithms

Stepan V. Lomov et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Article Engineering, Manufacturing

Thermal-mechanical cell model for unbalanced plain weave woven fabric composites

James Lua

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.