☆ 4.7 Article

Self-healing and in-situ real-time damage-reporting fiber-reinforced composite

COMPOSITES SCIENCE AND TECHNOLOGY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Analytical

A Review of Research Progress on Machining Carbon Fiber-Reinforced Composites with Lasers

Junke Jiao et al.

Summary: Carbon fiber-reinforced composites are widely used in lightweight manufacturing in various industries due to their excellent mechanical properties. Laser machining technology has advantages in processing carbon fiber-reinforced composites, but there are also defects such as heat affected zone, delamination, and fiber extraction. Many works have been carried out to improve the quality of laser machining in carbon fiber-reinforced composites.

MICROMACHINES (2023)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of self-healing capability of a polycaprolactone interphase in epoxy/glass composites

L. Simonini et al.

Summary: This study focused on evaluating the interfacial self-healing capability of glass fiber-reinforced epoxy composites by depositing polycaprolactone nanoparticles as a coating on the fiber surface. The deposition process of polycaprolactone nanoparticles was successful, showing good homogeneity and compactness. The results demonstrated an interfacial adhesive recovery of about 50% after the thermal mending process, indicating the induced interfacial self-healing capability by the polycaprolactone nanoparticles.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Methodology to Automatically Segment 3D Ultrasonic Data Using X-ray Computed Tomography and a Convolutional Neural Network

Juan-Ignacio Caballero et al.

Summary: In this study, a semi-automated defect segmentation method using a convolutional neural network on 3D ultrasonic data was proposed, facilitated by the fusion of X-ray computed tomography and Phased-Array Ultrasonic Testing data. This approach allows for the creation of genuine defect models and addresses the limitations of traditional UT techniques in defect evaluation. However, challenges such as accurate defect localization still need to be addressed for further improvement.

APPLIED SCIENCES-BASEL (2023)

添加到收藏夹

Article Materials Science, Composites

Topological effects of 3D-printed copolymer interlayers on toughening and in situ self-healing in laminated fiber-composites

Jack S. Turicek et al.

Summary: Interlaminar delamination in fiber-reinforced composites can lead to catastrophic failures. Traditional mitigation strategies are difficult to detect and repair, while proactive toughening and responsive self-healing offer practical solutions. Our recently developed strategy using 3D-printed thermoplastic interlayers and structurally integrated heaters has shown to improve composite toughening and in situ self-healing.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Polymer Science

Preparation of two-component micro-encapsulated epoxy self-healing materials based on Pickering emulsion method

Rui Wang et al.

Summary: In this study, a microencapsulated self-healing material with epoxy-amine was developed through Pickering emulsion, which showed less impact of factors such as microcapsule size and content on the mechanical properties. The microcapsules with bilayer shell were successfully prepared using two-dimensional materials as stabilizers. The addition of microcapsules slightly affected the mechanical properties of the material, but it still exhibited 89% bending stress and 148% tensile stress repair rate. These materials have great potential applications in engineering technology and other fields.

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

添加到收藏夹

Article Mechanics

Investigation of real delamination detection in composite structure using air-coupled ultrasonic testing

Mohammad Bahonar et al.

Summary: This research utilized air-coupled ultrasonic testing to detect composite defects, improving delamination detection accuracy through proper test setup and the use of a support vector machine classifier.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Strain induced crack initiation and the subsequent crack propagation of fiber-reinforced resin composites

Jia Qiu et al.

Summary: Fiber-reinforced composites are lightweight materials with important applications in various fields. Understanding their internal deformation and failure mechanism is crucial in optimizing their microstructure and interfaces. This study used synchrotron X-ray computed tomography and digital volume correlation to investigate the three-dimensional deformation and failure evolution of a representative unit of fiber-reinforced resin composites. The results showed that deformation parameters have a significant impact on crack initiation and propagation.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and characterization of silver-thiolate dynamic crosslinking waterborne polyurethane with room-temperature self-healing properties

Mengyun Zhang et al.

Summary: In this study, a self-healing waterborne polyurethane (SHWPU) was prepared by introducing silver-thiol coordination interactions. The material exhibited excellent self-healing performance, with a self-healing efficiency of 98.69% in terms of its tensile strength.

MATERIALS ADVANCES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thermoreversible Bonds and Graphene Oxide Additives Enhance the Flexural and Interlaminar Shear Strength of Self-Healing Epoxy/Carbon Fiber Laminates

Poulami Banerjee et al.

Summary: The study significantly improved the mechanical properties and introduced self-healing ability in CFRP laminates by incorporating thermoreversible bonds and graphene oxide. By establishing thermoreversible bonds between fibers and matrix, the flexural strength and interlaminar shear strength were effectively enhanced.

ACS APPLIED NANO MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Preparation of dual-chamber microcapsule by Pickering emulsion for self-healing application with ultra-high healing efficiency

Kaiyun Wu et al.

Summary: This work introduced a new concept for designing dual-chamber self-healing microcapsules using Pickering emulsion photopolymerization, achieving impressive self-healing efficiency. By varying the species of curing agent, healing agent, and wall materials, the prepared dual-chamber microcapsules can meet the requirements of versatile self-healing systems.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Composites

High-resolution air-coupled laser ultrasound imaging of microstructure and defects in braided CFRP

Lvming Zeng et al.

Summary: This paper presents a hybrid system for detecting microstructure and defects in braided CFRP that combines the advantages of laser-ultrasound and air-coupled ultrasonic testing, showing the potential for developing a non-contact, high-resolution, and low-cost method for the detection and repairment of advanced composite materials.

COMPOSITES COMMUNICATIONS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Self-Healing Polymers Based on Coordination Bonds

Cheng-Hui Li et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Synchronously improved electromagnetic interference shielding and thermal conductivity for epoxy nanocomposites by constructing 3D copper nanowires/thermally annealed graphene aerogel framework

Xutong Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Catalyst free self-healable vitrimer/graphene oxide nanocomposites

Balaji Krishnakumar et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Surface-Enhanced Hyper Raman Spectra of Aromatic Thiols on Gold and Silver Nanoparticles

Fani Madzharova et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

添加到收藏夹

Review Thermodynamics

Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review

Bing Wang et al.

ADVANCES IN MECHANICAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Ag-modified carbon fiber as a stable sensor

Zhihui Hu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Baseline-free defect evaluation of complex-microstructure composites using frequency-dependent ultrasound reflections

Zhen Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Correction Chemistry, Multidisciplinary

Epoxy resin with exchangeable disulfide crosslinks to obtain reprocessable, repairable and recyclable fiber-reinforced thermoset composites (vol 3, pg 241, 2016)

Alaitz Ruiz de Luzuriaga et al.

MATERIALS HORIZONS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Microwave near-field and far-field imaging of composite plate with hat stiffeners

Zhencheng Li et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

Development of self-healing epoxy composites via incorporation of microencapsulated epoxy and mercaptan in poly(methyl methacrylate) shell

Fatemeh Ahangaran et al.

POLYMER TESTING (2019)

添加到收藏夹

Article Polymer Science

Prediction of Thermal Exposure and Mechanical Behavior of Epoxy Resin Using Artificial Neural Networks and Fourier Transform Infrared Spectroscopy

Audrius Doblies et al.

POLYMERS (2019)

添加到收藏夹

Article Mechanics

Infrared Thermography assisted evaluation of static and fatigue Mode II fracture toughness in FRP composites

Giuseppe Pitarresi et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Stereolithographic 3D printing of extrinsically self-healing composites

Polly Sanders et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Reporting Fiber-Reinforced Composites That Mimic the Ability of Biological Materials to Sense and Report Damage

Omar Rifaie-Graham et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Engineering, Aerospace

Damage mechanisms of 3-D rectangular braided composite under multiple impact compressions

Xingzhong Gao et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

New evaluation of interfacial properties and damage sensing in CFRC by VARTM using 3D ER mapping

Jong-Hyun Kim et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Dynamic imine bond cross-linked self-healing thermosensitive hydrogels for sustained anticancer therapy via intratumoral injection

Xiu Han et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Microcapsule-Containing Self-Reporting Polymers

Celine Calvino et al.

SMALL (2018)

添加到收藏夹

Article Engineering, Manufacturing

Monitoring the interface and bulk self-healing capability of tri-axial electrospun fibers in glass fiber reinforced epoxy composites

Jamal Seyyed Monfared Zanjani et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

添加到收藏夹

Article Materials Science, Composites

Mechanochromic fluorescence in epoxy as a detection method for barely visible impact damage in CFRP composites

Ryan Toivola et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Composites

Pickering emulsion-based fabrication of epoxy and amine microcapsules for dual core self-healing coating

Huan Yi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Biochemistry & Molecular Biology

Injectable and Self-Healing Dynamic Hydrogels Based on Metal(I)-Thiolate/Disulfide Exchange as Biomaterials with Tunable Mechanical Properties

Pablo Casuso et al.

BIOMACROMOLECULES (2015)

添加到收藏夹

Article Materials Science, Textiles

Influence of Activation Time on the Microstructure and Antibacterial Activity of Nanosilver-containing Activated Carbon Fibers Prepared from Liquefied Wood

Wenjing Liu et al.

FIBERS AND POLYMERS (2015)

添加到收藏夹

Article Materials Science, Composites

Self-healing epoxy via epoxy-amine chemistry in dual hollow glass bubbles

He Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Physical

Self-healable interfaces based on thermo-reversible Diels-Alder reactions in carbon fiber reinforced composites

W. Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental study on active infrared thermography as a NDI tool for carbon-carbon composites

Liu Junyan et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Room temperature self-healing power of silicone elastomers having silver nanoparticles as crosslinkers

Roberto Martin et al.

CHEMICAL COMMUNICATIONS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Autonomic Recovery of Fiber/Matrix Interfacial Bond Strength in a Model Composite

Benjamin J. Blaiszik et al.

ADVANCED FUNCTIONAL MATERIALS (2010)

添加到收藏夹

Article Polymer Science

Self-healing polymeric materials using epoxy/mercaptan as the healant

Yan Chao Yuan et al.

MACROMOLECULES (2008)

添加到收藏夹

Article Materials Science, Composites

Transverse tensile strength of unidirectional fibre-reinforced polymers and self-healing of interfacial debonding

K Sanada et al.

PLASTICS RUBBER AND COMPOSITES (2006)

添加到收藏夹

Article Physics, Applied

Superlattices of silver nanoparticles passivated by mercaptan

ST He et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.