☆ 4.7 Article

Fatigue strength estimation of a CF/PEKK composite through self-heating temperature analysis using cyclic bending tests at 20 kHz

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

A hybrid method for determination of fatigue limit and non-destructive evaluation of composite structures after low-velocity impact loading

Andrzej Katunin et al.

Summary: This paper presents a hybrid method that combines fatigue limit evaluation with non-destructive evaluation to predict the behavior of composite structures with low-velocity impact damage. The results demonstrate the high sensitivity of the proposed method to impact damage and its ability to evaluate the fatigue life of tested structures. Recommendations for measurement setup and testing parameters are also provided.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Influence of Pulse-Pause Sequences on the Self-Heating Behavior in Continuous Carbon Fiber-Reinforced Composites under Ultrasonic Cyclic Three-Point Bending Loads

Aravind Premanand et al.

Summary: This study analyzes the influence of pulse-pause combinations in ultrasonic fatigue tests on the self-heating behavior of carbon fiber reinforced polymer (CFRP) materials. The results show that the specimen heating phenomenon depends on variables such as cyclic loading amplitude, pulse-pause combination, and material damage state. It is proposed that designing experiments based on the self-heating characteristic of the composite and the glass transition temperature (Tg) of the polymer matrix can further optimize the test procedure and testing time.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation on in-plane shear fatigue failure criteria of ± 45° angle-ply carbon epoxy composite

Sepanta Mandegarian et al.

Summary: This paper focuses on the response of materials under different loading conditions, particularly fatigue, in the design of load-bearing composite elements. By studying the variation of in-plane shear properties, a strain-based fatigue life criterion is proposed, which is validated through fatigue experiments.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Review Polymer Science

Recent Advances in Limiting Fatigue Damage Accumulation Induced by Self-Heating in Polymer-Matrix Composites

Jafar Amraei et al.

Summary: The self-heating effect is a catastrophic phenomenon that occurs in polymers and polymer-matrix composites (PMCs) under fatigue loading or vibrations. It results in temperature growth in these structures due to their low thermal conductivities, leading to thermal stress and fatigue failure. Therefore, understanding and minimizing the self-heating effect is crucial for practical applications.

POLYMERS (2022)

添加到收藏夹

Article Mechanics

Enabling rapid fatigue life prediction of short carbon fiber reinforced polyether-ether-ketone using a novel energy dissipation-based model

Aijia Li et al.

Summary: This study investigates the energy dissipation behavior of short carbon fiber reinforced polyether-ether-ketone (SCFRPEEK) under fatigue loading. A new model combining thermodynamic laws and fatigue damage mechanisms was established to predict the fatigue limit and S-N curve for SCFR-PEEK. By monitoring temperature distribution evolution using an infrared camera during fatigue tests, energy dissipated during the tests was calculated based on local thermodynamic differential equations. Through analysis of different sources of intrinsic dissipation and their correlation to fatigue damage, the model successfully estimated fatigue properties of SCFR-PEEK with a goodness of fit of 0.964.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Fatigue life prediction for the main spar with wrinkle defects of a wind turbine blade

Fangai Yu et al.

Summary: This paper presents a practical method for predicting fatigue life of the main spar with wrinkle defects in a wind turbine blade. It quantifies the effect of different wrinkle geometry on stiffness in a composite laminate and develops a fatigue life prediction model containing unknown parameters. The model accuracy is verified through experimental data.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Fatigue damage assessment in AM polymers evaluating their energy release

Dario Santonocito et al.

Summary: In order to ensure proper mechanical performance and investigate fatigue behavior of AM components, a deep understanding of process parameters is required. Monitoring specimen temperature using the Static Thermographic Method provides useful information on damage evolution within the material, allowing for rapid assessment of initiation of damage.

SECOND EUROPEAN CONFERENCE ON THE STRUCTURAL INTEGRITY OF ADDITIVELY MANUFACTURED MATERIALS (2021)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Determination of Fatigue Limit by Static Thermographic Method and Classic Thermographic Method on Notched Specimens

Pietro Foti et al.

1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1) (2020)

添加到收藏夹

Article Materials Science, Composites

Determination of fatigue limit of polymeric composites in fully reversed bending loading mode using self-heating effect

Andrzej Katunin et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Mechanics

Impact damage assessment in polymer matrix composites using self-heating based vibrothermography

Andrzej Katunin et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Review Polymer Science

Criticality of the Self-Heating Effect in Polymers and Polymer Matrix Composites during Fatigue, and Their Application in Non-Destructive Testing

Andrzej Katunin

POLYMERS (2019)

添加到收藏夹

Article Mechanics

EVALUATION OF CRITICALITY OF SELF-HEATING OF POLYMER COMPOSITES BY ESTIMATING THE HEAT DISSIPATION RATE

A. Katunin

MECHANICS OF COMPOSITE MATERIALS (2018)

添加到收藏夹

Article Mechanics

Characterization of failure mechanisms of composite structures subjected to fatigue dominated by the self-heating effect

Andrzej Katunin et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Civil

Criticality of self-heating in degradation processes of polymeric composites subjected to cyclic loading: A multiphysical approach

Andrzej Katunin et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Composites

Investigation of the high and very high cycle fatigue behaviour of continuous fibre reinforced plastics by conventional and ultrasonic fatigue testing

D. Flore et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Composites

Ultrasonic fatigue and microstructural characterization of carbon fiber fabric reinforced polyphenylene sulfide in the very high cycle fatigue regime

Daniel Backe et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Composites

Fatigue testing of CFRP in the Very High Cycle Fatigue (VHCF) regime at ultrasonic frequencies

Daniel Backe et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Criticality of degradation in composite materials subjected to cyclic loading

Ali Kahirdeh et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Proceedings Paper Automation & Control Systems

A Simple Method for Estimation of Parameters in First order Systems

Henrik Niemann et al.

EUROPEAN WORKSHOP ON ADVANCED CONTROL AND DIAGNOSIS, PTS 1-8 (2014)

添加到收藏夹

Article Mechanics

Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite

John Montesano et al.

COMPOSITE STRUCTURES (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Dissipated thermal energy and damage evolution of Glass/Epoxy using infrared thermography and acoustic emission

M. Naderi et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Fatigue strength assessment of a short fiber composite based on the specific heat dissipation

Giovanni Meneghetti et al.

COMPOSITES PART B-ENGINEERING (2011)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Fatigue behaviour of a GFRP laminate by thermographic measurements

C. Colombo et al.

11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) (2011)

添加到收藏夹

Article Engineering, Mechanical

Analysis of the fatigue strength of a stainless steel based on the energy dissipation

G. Meneghetti

INTERNATIONAL JOURNAL OF FATIGUE (2007)

添加到收藏夹

Article Engineering, Mechanical

Prediction of long-term fatigue life of quasi-isotropic CFRP laminates for aircraft use

Yasushi Miyano et al.

INTERNATIONAL JOURNAL OF FATIGUE (2006)

添加到收藏夹

Article Engineering, Mechanical

Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components

G La Rosa et al.

INTERNATIONAL JOURNAL OF FATIGUE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.