☆ 4.7 Article

Minimum weight design of CNT/fiber reinforced laminates subject to a frequency constraint by optimal distribution of reinforcements across the thickness

COMPOSITE STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Buckling and free vibrations of CNT-reinforced cross-ply laminated composite plates

Omer Civalek et al.

Summary: This article investigates the free vibration and buckling behaviors of CNT-reinforced cross-ply laminated composite plates using FSDT and DSC methods. Parametric study is conducted to analyze the effects of various factors on frequencies and buckling loads.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2022)

添加到收藏夹

Article Mechanics

Multifunctional trace of various reinforcements on vibrations of three-phase nanocomposite combined hemispherical-cylindrical shells

Emad Sobhani et al.

Summary: The present study investigates the vibrations of combined hemispherical-cylindrical shells made of three-phase nanocomposite materials. Various theoretical methods are employed to evaluate material parameters and obtain equivalent mechanical properties, with proposed formulations validated through comparison with reference solutions and commercial FEM software outputs.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of carbon nanotubes distribution on the buckling of carbon nanotubes/fiber/polymer/metal hybrid laminates cylindrical shell

Ahmad Reza Ghasemi et al.

Summary: This study investigates the buckling of carbon nanotubes reinforced circular cylindrical composite shells under hydrostatic pressure, showing that reinforcing with 5% carbon nanotubes can increase buckling resistance by about 10%. The impact of material type and volume fraction on fiber metal laminates cylinders is also illustrated, with Az91 and Ti6AlV having approximately 15% more effect than Al2024 on buckling resistance.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review on the mechanical properties of polymer composites reinforced by carbon nanotubes and graphene

Amit Kumar et al.

Summary: This review compares the properties of carbon nanotubes (CNTs) and graphene in polymer composites, discussing their surface characteristics, functionalization effects, and mechanical properties. Furthermore, potential applications and future challenges regarding filler and their polymer composites are also addressed.

CARBON LETTERS (2021)

添加到收藏夹

Article Mechanics

Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses

M. S. H. Al-Furjan et al.

Summary: The frequency characteristics of circular/annular plates reinforced with multi-scale hybrid laminates nanocomposite are studied using state-space formulation based on 3D-elasticity theory. The properties of the plates change layer-by-layer with carbon nanotubes uniformly dispersed in each layer. Initial lateral stress and stacking sequence have significant effects on the frequency behavior of the composite structure.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Vibration behaviors of two-directional carbon nanotube reinforced functionally graded composite plates

Armagan Karamanli et al.

Summary: The dynamical analysis of two directional functionally graded carbon nanotube reinforced composite plates shows that the distribution of CNTs significantly affects the dimensionless frequencies. The difference between the dimensionless frequencies calculated based on the 2DFG-CNTRC and 1DFG-CNTRC configurations is significant under different CNT configurations, volume fractions, and aspect ratios.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Nonlinear damped vibrations of three-phase CNT-FRC circular cylindrical shell

Amit Yadav et al.

Summary: This study presents a semi-analytical solution for nonlinear vibrations of circular cylindrical shells made of carbon nanotube (CNT) fiber-reinforced composite (CNT-FRC), considering factors such as CNT distribution, matrix properties, and laminate structure.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Multi-objective optimization for lightweight design of bi-directional functionally graded beams for maximum frequency and buckling load

Rasha M. Abo-bakr et al.

Summary: This paper proposes a multi-objective particle swarm optimization (MOPSO) algorithm integrated with a semi-analytical solution for lightweight design of bi-directional functionally graded beams. By searching for Pareto-optimal solutions, the algorithm effectively achieves the desired objectives. The accuracy and efficiency of the method are demonstrated through several optimization problems.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Optimal weight for buckling of FG beam under variable axial load using Pareto optimality

R. M. Abo-bakr et al.

Summary: This article investigates buckling of functionally graded beam under variable axial load and optimizes its weight to maximize the buckling load. Numerical differential quadrature method is used to solve equilibrium equations and multiobjective optimization procedure is performed for designing FG beams under varying axial load. The proposed model efficiently predicts the best light weight design of a beam under variable axial load.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Forced Vibration Analysis of Composite Beams Reinforced by Carbon Nanotubes

Omer Civalek et al.

Summary: This paper presents the forced vibration analysis of a simply supported beam made of carbon nanotube-reinforced composite material, investigating the effects of carbon nanotube volume fraction, aspect ratio, and dynamic parameters on the forced vibration response. Numerical examples were used to validate the formulations through comparison studies with published results.

NANOMATERIALS (2021)

添加到收藏夹

Review Mechanics

Estimation of carbon nanotubes and their applications as reinforcing composite materials-An engineering review

A. Garg et al.

Summary: This study reviews the use of carbon nanotubes to reinforce materials for increased strength, discussing various methods for predicting material properties and structural performance, while also highlighting some unresolved areas for future research.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Optimization of hybrid natural laminated composite beams for a minimum weight and cost design

M. Megahed et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Experimental and Numerical Study on Free Vibration of Multiwall Carbon Nanotube Reinforced Composite Plates

Asha Patel et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2020)

添加到收藏夹

Article Materials Science, Composites

Variable Stiffness Composites: Optimal Design Studies

Filipe Eduardo Correia Marques et al.

JOURNAL OF COMPOSITES SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of randomly oriented CNTs on the elastic properties of unidirectionally aligned composites

I. A. Kazakov et al.

MECHANICS OF MATERIALS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

A comprehensive review on analysis of nanocomposites: from manufacturing to properties characterization

M. Vinyas et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Estimating Young's modulus of graphene/polymer composites using stochastic multi-scale modeling

Roham Rafiee et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

Hybrid carbon fiber-carbon nanotubes reinforced polymer composites: A review

Muhammad Razlan Zakaria et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Composites

Least-weight composite plates with unconventional stacking sequences: Design, analysis and experiments

Marco Montemurro et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Materials Science, Composites

Natural Frequency Analysis and Optimal Design of CNT/Fiber/Polymer Hybrid Composites Plates Using Mori-Tanaka Approach, GDQ Technique, and Firefly Algorithm

S. Kamarian et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Engineering, Aerospace

Numerical study on the nonlinear resonant dynamics of carbon nanotube/fiber/polymer multiscale laminated composite rectangular plates with various boundary conditions

Raheb Gholami et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Mechanics

Multi-objective multi-laminate design and optimization of a Carbon Fibre Composite wing torsion box using evolutionary algorithm

Sachin Shrivastava et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Cross-Sectional Design and Analysis of Multiscale Carbon Nanotubes-Reinforced Composite Beams and Blades

M. Rafiee et al.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Free vibration, bending and buckling of a FG-CNT reinforced composite beam Comparative analysis with hybrid laminated composite beam

Puneet Kumar et al.

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2017)

添加到收藏夹

Article Engineering, Aerospace

Static response and free vibration of functionally graded carbon nanotube-reinforced composite rectangular plates resting on Winkler -Pasternak elastic foundations

Nguyen Dinh Duc et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Buckling analysis of functionally graded carbon nanotube-reinforced curved panels under axial compression and shear

Enrique Garcia-Macias et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Mechanics

Lightweight design of composite laminated structures with frequency constraint

Qimao Liu et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Carbon fiber/carbon nanotube reinforced hierarchical composites: Effect of CNT distribution on shearing strength

H. W. Zhou et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Mechanical

Stacking sequence optimization of laminated composite grid plates for maximum buckling load using genetic algorithm

Amir Ehsani et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Mechanics

Large amplitude vibration of fractionally damped viscoelastic CNTs/fiber/polymer multiscale composite beams

X. Q. He et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Optimization of laminate stacking sequence for minimizing weight and cost using elitist ant system optimization

Hossein Hemmatian et al.

ADVANCES IN ENGINEERING SOFTWARE (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic analysis of functionally graded nanocomposite beams reinforced by randomly oriented carbon nanotube under the action of moving load

M. H. Yas et al.

APPLIED MATHEMATICAL MODELLING (2012)

添加到收藏夹

Article Mechanics

DSC analysis of a simply supported anisotropic rectangular plate

Xinwei Wang et al.

COMPOSITE STRUCTURES (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Generalized Timoshenko modelling of composite beam structures: sensitivity analysis and optimal design

Maria Augusta Neto et al.

ENGINEERING OPTIMIZATION (2008)

添加到收藏夹

Article Acoustics

Layerwise optimization for the maximum fundamental frequency of laminated composite plates

Y Narita

JOURNAL OF SOUND AND VIBRATION (2003)

添加到收藏夹

Article Mechanics

Optimum stacking sequence design of symmetric hybrid laminates undergoing free vibrations

S Adali et al.

COMPOSITE STRUCTURES (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.