☆ 4.7 Article

Quasi-static compression tests of overwrapped composite pressure vessels under low velocity impact

COMPOSITE STRUCTURES (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Design of portable hydrogen tank using adsorption material as storage media: An alternative to Type IV compressed tank

Dong Ho Nguyen et al.

Summary: This paper presents a design concept of a portable hydrogen tank that utilizes porous materials for hydrogen storage. The portable tank offers a safer alternative to the commercial Type IV tank, with reduced explosion risk and improved system weight, gravimetric capacity, and material cost. The study also predicts the future performance of porous materials and evaluates the system capacity of the portable tank, showing promising results that surpass the ultimate target set by DOE.

APPLIED ENERGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Low-velocity ice impact response and damage phenomena on steel and CFRP sandwich composite

Arnob Banik et al.

Summary: This study investigates the low-velocity impact response of ice impactor on steel and carbon fiber reinforced polymer sandwich composite. The findings show that the shape, length, and impact velocity of the ice impactors have an effect on the type and severity of damage in the composite material.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

添加到收藏夹

Article Engineering, Civil

Study of impact damage on composite laminates induced by strip impactor using DIC and infrared thermography

Hongliang Tuo et al.

Summary: This paper investigates the impact damage caused by strip impactors and residual mechanical performance of composite laminates using DIC and infrared thermography. A continuum damage model and a cohesive model were utilized to simulate the intralaminar and interlaminar behaviors, respectively. The results indicate that the delamination area and residual load capacity decrease as the impact angle increases. Compression after impact (CAI) process leads to strain concentration in the damage area and local buckling. Subsequently, delamination and matrix damage occur, followed by fiber damage. The composite laminates collapse when the fiber damage area covers the whole width of the damage area.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Effects of fillers on the impact damage and compressive residual properties of single hat-stiffened composite panels

Longquan Liu et al.

Summary: This study investigates the impact of fillers on the mechanical properties of hat-stiffened composite skin through experimental and numerical simulations. The results show that the use of fillers can enhance the impact resistance and failure load of the hat-stiffened composite skin.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Impact damage tolerance of energy storage composite structures containing lithium-ion polymer batteries

K. Pattarakunnan et al.

Summary: This study investigates the impact of low velocity impact on composite materials containing embedded lithium-ion polymer batteries. The results show that the presence of batteries can enhance the impact energy absorption of the composites, but collisions can reduce the compressive properties of the materials. Low energy impacts have minimal effects on the energy storage capacity of the batteries, while high energy impacts can lead to internal short circuits.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Composites

Investigation of interlayer hybridization effect on burst pressure performance of composite overwrapped pressure vessels with load-sharing metallic liner

Serkan Kangal et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Engineering, Civil

Theoretical study of failure in composite pressure vessels subjected to low-velocity impact and internal pressure

Roham Rafiee et al.

FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Theoretical and numerical analyses of composite cylinders subjected to the low velocity impact

Roham Rafiee et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Stochastic prediction of burst pressure in composite pressure vessels

Roham Rafiee et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Composites

A comparison of quasi-static indentation and low-velocity impact on composite overwrapped pressure vessels

Trevor Allen et al.

JOURNAL OF COMPOSITE MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and numerical studies of impact on filament-wound composite cylinder

Qiaoguo Wu et al.

ACTA MECHANICA SOLIDA SINICA (2017)

添加到收藏夹

Article Mechanics

Burst pressure reduction of various thermoset composite pressure vessels after impact on the cylindrical part

P. Blanc-Vannet

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Assessment of residual strength of repaired solid laminate composite materials through mechanical testing

P. G. Slattery et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical/experimental impact events on filament wound composite pressure vessel

Giovanni Perillo et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Engineering, Mechanical

Effect of nanofillers on low energy impact performance of sandwich structures with nanoreinforced polyurethane foam cores

Sophia Sachse et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2014)

添加到收藏夹

Article Engineering, Aerospace

Predicting low-velocity impact damage in composites by a quasi-static load model with cohesive interface elements

X. Zhang et al.

AERONAUTICAL JOURNAL (2012)

添加到收藏夹

Article Engineering, Manufacturing

Effects of stacking thickness on the damage behavior in CFRP composite cylinders subjected to out-of-plane loading

Satoshi Kobayashi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

The use of quasi-static testing to obtain the low-velocity impact damage resistance of marine GRP laminates

L. S. Sutherland et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Finite Element Analysis of Glass Fiber-Reinforced Polyamide Engine Oil Pan Subjected to Localized Low Velocity Impact from Flying Projectiles

Zakaria Mouti et al.

STEEL RESEARCH INTERNATIONAL (2012)

添加到收藏夹

Article Materials Science, Composites

Fabrication, Characterization and Low-Velocity Impact Testing of Hybrid Sandwich Composites With Polyurethane/Layered Silicate Foam Cores

James Njuguna et al.

POLYMER COMPOSITES (2011)

添加到收藏夹

Article Mechanics

An experimental investigation of the impact response of composite laminates

Mehmet Aktas et al.

COMPOSITE STRUCTURES (2009)

添加到收藏夹

Article Chemistry, Physical

Filling procedure for vehicles with compressed hydrogen tanks

Steffen Maus et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

添加到收藏夹

Article Polymer Science

Analysis of ductile and brittle failures from creep rupture testing of high-density polyethylene (HDPE) pipes

RK Krishnaswamy

POLYMER (2005)

添加到收藏夹

Article Mechanics

Impact resistance and damage characteristics of composite laminates

TW Shyr et al.

COMPOSITE STRUCTURES (2003)

添加到收藏夹

Article Engineering, Multidisciplinary

Design of laminated composite cylindrical shells under axial compression

PM Weaver

COMPOSITES PART B-ENGINEERING (2000)

添加到收藏夹

Article Engineering, Multidisciplinary

Damage, deformation and residual burst strength of filament-wound composite tubes subjected to impact or quasi-static indentation

J Curtis et al.

COMPOSITES PART B-ENGINEERING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.