相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Interplay of manufacturing-induced thermal residual stresses and microvoids in damage and failure of fiber-reinforced composites
Jinlong He et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)
Machine learning and materials informatics approaches for predicting transverse mechanical properties of unidirectional CFRP composites with microvoids
Mengze Li et al.
MATERIALS & DESIGN (2022)
Concurrent multiscale modeling of in-plane micro-damage evaluation in Z-pinned composite laminates
Weiwei Wang et al.
COMPOSITE STRUCTURES (2022)
Numerical and experimental studies of the influence of curing and residual stresses on buckling in thin-walled, CFRP square-section profiles
Pawel Czapski et al.
COMPOSITE STRUCTURES (2021)
A multi phase-field-cohesive zone model for laminated composites: Application to delamination migration
P. K. Asur Vijaya Kumar et al.
COMPOSITE STRUCTURES (2021)
Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process
Xinyu Hui et al.
COMPOSITE STRUCTURES (2021)
Cure-induced strain and failure in deltoid of composite T-joints
Shinsaku Hisada et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
An integrated modeling of the curing process and transverse tensile damage of unidirectional CFRP composites
Xinyu Hui et al.
COMPOSITE STRUCTURES (2021)
Out-of-plane tensile failure behavior of fiber reinforced composites due to lay-up temperature induced intra-ply and inter-ply voids
Weizhu Zhou et al.
COMPOSITE STRUCTURES (2021)
Effects of material and process parameters on void evolution in unidirectional prepreg during vacuum bag-only cure
Wei Hu et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Design and optimization of composite sub-stiffened panels
Yaoyao Ye et al.
COMPOSITE STRUCTURES (2020)
A multi phase-field fracture model for long fiber reinforced composites based on the Puck theory of failure
A. Dean et al.
COMPOSITE STRUCTURES (2020)
Micromechanical progressive damage analysis of inter- and intra-layer failures in fiber-reinforced composite laminates
Y. Q. Zhao et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Multiscale numerical and experimental investigation into the evolution of process-induced residual strain/stress in 3D woven composite
Qi Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Multiscale model of micro curing residual stress evolution in carbon fiber-reinforced thermoset polymer composites
Xinyu Hui et al.
FRONTIERS OF MECHANICAL ENGINEERING (2020)
Influence of laminate code and curing process on the stability of square cross-section, composite columns - Experimental and FEM studies
Pawel Czapski
COMPOSITE STRUCTURES (2020)
Cure-dependent microstructures and their effect on elastic properties of interlayer toughened thermoset composites
Cheng Chen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Influence of Large Framed Mold Placement in Autoclave on Heating Performance
Dilmurat Dolkun et al.
APPLIED COMPOSITE MATERIALS (2020)
A heat-balance method for autoclave process of composite manufacturing
Lingyun Wang et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Multi-Scale Modeling of Curing Residual Stresses in Composite with Random Fiber Distribution into Consideration
Zhenyi Yuan et al.
APPLIED COMPOSITE MATERIALS (2019)
A numerical micro-mechanical study on damage induced by the curing process in carbon/epoxy unidirectional material
F. Danzi et al.
COMPOSITE STRUCTURES (2019)
Computational evaluation of the effects of void on the transverse tensile strengths of unidirectional composites considering thermal residual stress
Meng Wang et al.
COMPOSITE STRUCTURES (2019)
Experimental and micromechanical investigation of T300/7901 unidirectional composite strength
Y. Q. Zhao et al.
POLYMER COMPOSITES (2019)
Multi-scale computational analysis of unidirectional carbon fiber reinforced polymer composites under various loading conditions
Qingping Sun et al.
COMPOSITE STRUCTURES (2018)
Three-dimensional microscopic assessment of randomly distributed representative volume elements for high fiber volume fraction unidirectional composites
Aram Bahmani et al.
COMPOSITE STRUCTURES (2018)
A micromechanical study of stress concentrations in composites
Hossein Ghayoor et al.
COMPOSITES PART B-ENGINEERING (2018)
Evolution of curing residual stresses in composite using multi-scale method
Zhenyi Yuan et al.
COMPOSITES PART B-ENGINEERING (2018)
Optimization of Curing Process for Polymer-matrix Composites Based on Orthogonal Experimental Method
Tengfei Chang et al.
FIBERS AND POLYMERS (2017)
Design optimization of molds for autoclave process of composite manufacturing
Qing Wang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Process-induced strain and distortion in curved composites. Part II: Parametric study and application
Kazunori Takagaki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Effect of residual stress on the matrix fatigue cracking of rapidly cured epoxy/anhydride composites
Mathew W. Joosten et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Effects of triangle-shape fiber on the transverse mechanical properties of unidirectional carbon fiber reinforced plastics
Lei Yang et al.
COMPOSITE STRUCTURES (2016)
Rapidly cured epoxy/anhydride composites: Effect of residual stress on laminate shear strength
S. L. Agius et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Chemical and thermal shrinkage in thermosetting prepreg
Oleksandr G. Kravchenko et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Effect of curing overheating on interlaminar shear strength and its modelling in thick FRP laminates
Luca Esposito et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effect of aging on microstructures and properties of Mo-alloyed Fe-36Ni invar alloy
Hongwang Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of Processing Parameters on the Interlaminar Shear Strength of Carbon Fiber/Epoxy Composites
Hong-Wei He et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2014)
A new method for generating random fibre distributions for fibre reinforced composites
Lei Yang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Effects of inter-fiber spacing and thermal residual stress on transverse failure of fiber-reinforced polymer-matrix composites
Lei Yang et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Microscopic failure mechanisms of fiber-reinforced polymer composites under transverse tension and compression
Lei Yang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Effects of variation in autoclave pressure, temperature, and vacuum-application time on porosity and mechanical properties of a carbon fiber/epoxy composite
Hoda Koushyar et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
A Modified Benzeggagh-Kenane Fracture Criterion for Mixed-mode Delamination
Q. V. Bui
JOURNAL OF COMPOSITE MATERIALS (2011)
Two-step method to evaluate equibiaxial residual stress of metal surface based on micro-indentation tests
Masaaki Nishikawa et al.
MATERIALS & DESIGN (2011)
Effects of interphase material properties in unidirectional fibre reinforced composites
A. R. Maligno et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Cure Kinetics Modeling and Cure Shrinkage Behavior of a Thermosetting Composite
Nuri Ersoy et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Effects of inter-fibre spacing on damage evolution in unidirectional (UD) fibre-reinforced composites
A. R. Maligno et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)
Closed-form solution for process-induced stresses and deformation of a composite part cured on a solid tool: Part I - Flat geometries
Abdul Rahim Ahamed Arafath et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Generation of random distribution of fibres in long-fibre reinforced composites
A. R. Melro et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
A thermo-viscoelastic analysis of process-induced residual stress in fibre-reinforced polymer-matrix composites
L. G. Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
A micromechanical study of residual stress and its effect on transverse failure in polymer-matrix composites
L. G. Zhao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Effects of cure cycles on void content and mechanical properties of composite laminates
L Liu et al.
COMPOSITE STRUCTURES (2006)
Measurement of residual stress in thick section composite laminates using the deep-hole method
MG Bateman et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2005)
In-plane shear testing of medium and high modulus woven graphite fiber reinforced/polyimide composites
M Gentz et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Prediction of shape distortions. Part II. Experimental validation and analysis of boundary conditions
JM Svanberg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
In situ monitoring of residual strain development during composite cure
AS Crasto et al.
POLYMER COMPOSITES (2002)
An experimental investigation on mechanisms for manufacturing induced shape distortions in homogeneous and balanced laminates
JM Svanberg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
An analysis of residual thermal stresses in a unidirectional graphite/PMR-15 composite based on X-ray diffraction measurements
B Benedikt et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Overall behaviour of heterogeneous elastoviscoplastic materials: effect of microstructural modelling
O van der Sluis et al.
MECHANICS OF MATERIALS (2000)
分享论文
