☆ 4.7 Article

A novel analytical model for fiber reinforced cementitious matrix FRCM coupons subjected to tensile tests

COMPOSITE STRUCTURES (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

FRCM-to-masonry bonding behaviour in the case of curved surfaces: Experimental investigation

Tommaso Rotunno et al.

Summary: FRCM is a composite material used for reinforcement of masonry structures. This study investigates the behavior of FRCM systems applied on curved masonry specimens and the results show the influence of curvature and reinforcement position on the response of specimens in terms of bearing capacity, failure mode and post-peak response.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Article Construction & Building Technology

Experimental and numerical investigation on the tensile behavior of PBO FRCM composites with textile lap splice

Tommaso D'Antino et al.

Summary: This paper investigates the tensile behavior of fiber-reinforced cementitious matrix composites through experimental tests and finite element modeling. The results show that the clevis-grip tests can determine the minimum lap splice length needed for the composite load-carrying capacity and confirm the validity of the proposed method for estimating such lap splice length.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Non-linear analytical model for FRCM coupons in tension

Yu Yuan et al.

Summary: Externally bonded FRCM materials have become widely used for reinforcing existing structures. This paper proposes a simplified analytical model to study the damage mechanisms in FRCM coupons in tension, including interface slippage and mortar cracking. The model is verified by comparing the results with experimental data, and the conditions and effects of these failure mechanisms are investigated.

COMPOSITES PART B-ENGINEERING (2023)

添加到收藏夹

Article Construction & Building Technology

Formulation of a truss element for modelling the tensile response of FRCM strips

Giovanni Minafo et al.

Summary: The complex mechanics of Fabric Reinforced Cementitious Matrix (FRCM) materials make it difficult to model their tensile behavior accurately. After matrix cracking, the fiber-matrix compatibility is lost and the system behaves as two separate elements connected by a brittle interface. Computational approaches, such as brick-based 3D Finite Element Models (FEM), have been proposed to evaluate the tensile behavior of FRCM composites. A simplified coupled truss element has been formulated in this study for modeling the tensile behavior of FRCM composites, showing promise in terms of reliability and computational efficiency.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Mechanics

A tension stiffening model for FRCM reinforcements calibrated by means of an extended database

Francesca Nerilli et al.

Summary: In this study, the tensile performance of FRCM composites as a structural retrofitting technique is analyzed through an extensive database of experimental results. The mechanical and geometrical parameters of the constituents are found to influence the tensile response of the FRCM reinforcement. An analytical provisional formulation is proposed to reproduce the stress-strain behavior of FRCMs based on the mechanical and geometrical features of the constituents.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Construction & Building Technology

Experimental characterization of the textile-to-mortar bond through distributed optical sensors

Elisa Bertolesi et al.

Summary: This article investigates the behavior and characterization of TRM materials by directly monitoring the strain evolution of textile bundles using distributed fiber optic sensors. The results provide valuable insights for optimizing the bond performance of TRM and accurately predict its global performance using analytical models.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Materials Science, Composites

Clevis-Grip Tensile Tests on Basalt, Carbon and Steel FRCM Systems Realized with Customized Cement-Based Matrices

Dario De Domenico et al.

Summary: This study experimentally investigates the tensile properties of fabric-reinforced cementitious matrix (FRCM) composites and prepares FRCM samples with different fibers and matrices. The results show that matrix B exhibits good compatibility with basalt pre-impregnated fabric, while matrix C optimizes the stress transfer at the fiber-matrix interface for all fabrics, improving the mechanical performance.

JOURNAL OF COMPOSITES SCIENCE (2022)

添加到收藏夹

Review Chemistry, Physical

Constitutive Models for the Tensile Behaviour of TRM Materials: Literature Review and Experimental Verification

Maria Concetta Oddo et al.

Summary: In recent years, the scientific community has focused on innovative inorganic matrix composite materials, specifically TRM, for retrofitting existing masonry buildings. Various studies have been conducted to improve understanding of the mechanical behavior of TRM, with some theoretical models proposed for predicting its tensile response. However, further research is needed due to the complexity of constituent materials and stress transfer mechanisms.

MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Theoretical model for the study of the tensile behavior of FRCM reinforcements

Ernesto Grande et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical simulation of the tensile behavior of FRCM strengthening systems

Ernesto Grande et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Analytical

Study on Retrofitted Masonry Elements under Shear Using Digital Image Correlation

Benjamin Torres et al.

SENSORS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Simple bisection procedure in quickly convergent explicit ODE solver to numerically analyze FRCM strengthening systems

Gabriele Milani et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

The role of the fiber-matrix interfacial properties on the tensile behavior of FRCM coupons

Francesco Focacci et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and numerical evaluation of fiber-matrix interface behaviour of different FRCM systems

Alessandro Bellini et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Construction & Building Technology

Comparison between different tensile test set-ups for the mechanical characterization of inorganic-matrix composites

T. D'Antino et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Civil

Acceptance Criteria for Tensile Characterization of Fabric-Reinforced Cementitious Matrix Systems for Concrete and Masonry Repair

Stefano De Santis et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements

Francesca Giulia Carozzi et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate

Marianovella Leone et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Performance assessment of basalt FRCM for retrofit applications on masonry

Gian Piero Lignola et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures

Carmelo Caggegi et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical characterization of textile reinforced inorganic-matrix composites

T. D'Antino et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Round Robin Test on tensile and bond behaviour of Steel Reinforced Grout systems

Stefano De Santis et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Construction & Building Technology

Mechanical characterization of different FRCM systems for structural reinforcement

Jacopo Donnini et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Mechanics

Application of Digital Image Correlation to composite reinforcements testing

Marcin Tekieli et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical properties of FRCM using carbon fabrics with different coating treatments

Jacopo Donnini et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical properties and debonding strength of Fabric Reinforced Cementitious Matrix (FRCM) systems for masonry strengthening

Francesca Giulia Carozzi et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Construction & Building Technology

Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension

Elisa Bertolesi et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress

Pello Larrinaga et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.