☆ 4.7 Article

Torsional mechanical properties and damage mechanism of glass fiber-ramie hybrid circular tube

COMPOSITE STRUCTURES (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Aerospace

Hybrid effects and interactive failure mechanisms of hybrid fiber composites under flexural loading: Carbon/Kevlar, carbon/glass, carbon/glass/Kevlar

Hongyong Jiang et al.

Summary: Regulatable and customized mechanical properties of aeronautical composites can be obtained with fiber hybridization, but the challenging hybridization design is due to complex effects. This study reveals the hybrid effects and failure mechanisms of carbon-glass-Kevlar hybrid fiber reinforced polymer composites under flexural loading. Different hybridizations are proposed and flexural tests are conducted to evaluate the properties. Microscopic characterization demonstrates the improvements in properties and the interaction effects of hybrid ratio and dispersity. Numerical simulations further confirm the mechanical behaviors of the composites.

AEROSPACE SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Mechanical

Failure analysis of glass fiber reinforced composite pipe for high pressure sewage transport

Dandan Liao et al.

Summary: The research examined the failure of GFRP pipes used in sour oilfield pipelines, which experienced destructive cracking after 15 years of operation. Factors contributing to the failure include cavity defects, low resin content, insufficient curing, weak fiber bonding strength, and chemical degradation of the resin and curing agent.

ENGINEERING FAILURE ANALYSIS (2023)

添加到收藏夹

Article Materials Science, Textiles

Physical and Mechanical Behavior of Ramie and Glass Fiber Reinforced Epoxy Resin-Based Hybrid Composites

Lalta Prasad et al.

Summary: The compression molding technique was used to fabricate hybrid composites with different wt.% of glass and ramie fibers in different stacking sequences. The physical and mechanical characteristics of the hybrid composites were studied, and the optimal composition was determined using a preference model. The stacking sequence played a crucial role in the characteristics of the composites, with the GRG sequence showing optimal characteristics. Microstructural analysis revealed voids, de-lamination, interfacial bonding, fiber pull-out, and matrix distribution.

JOURNAL OF NATURAL FIBERS (2023)

添加到收藏夹

Article Mechanics

Enhancement of impact toughness using graphene oxide in epoxy composite reinforced with ramie fabric

Artur Camposo Pereira et al.

Summary: The incorporation of graphene oxide in the polymeric composite reinforced with ramie fabric increased impact and ballistic resistance. Tests showed a significant improvement in impact performance when adding 0.2% of GO, and the use of IPA solution on ramie fabric prevented projectile perforation.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Marine

Analysis of the mechanical properties of a fibreglass reinforced flexible pipe (FGRFP)

Yifan Gao et al.

Summary: This paper studies the mechanical behavior of fiberglass reinforced flexible pipes under pure bending through experimental, numerical, and theoretical methods. The proposed numerical simulation method and simplified theoretical method have been validated and shown to be reasonable and accurate. The findings of this research provide engineers with a concise and relatively accurate way to analyze the ultimate status of such pipes.

SHIPS AND OFFSHORE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Composites

Vibrational analysis of glass/ramie fiber reinforced hybrid polymer composite

Chenniappan Thiyagu et al.

Summary: This research investigates the impacts of surface treatment and the number of ramie fiber layers on the vibrational and mechanical characteristics of a glass/ramie fiber reinforced hybrid polymer composite. The study found that hybridization and NaOH pre-treatment to a certain ratio can increase the mechanical strength of the hybrid composite compared to natural fiber composites.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Mechanics

Interlaminar shear strength study of Mg and carbon fiber-based hybrid laminates with self-healing microcapsules

Monika Ostapiuk et al.

Summary: The study investigates the shear strengthening of fiber metal laminates with surface treated magnesium and carbon fiber reinforced epoxy (CFRP) laminates. It finds that configurations involving specific fiber orientation and MCs content result in the highest interlaminar shear strength and reduced damage in the FML structure. The presence of MCs creates interlocking and self-healing effects that contribute to the shear strengthening phenomenon observed in these FMLs.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Composites

Damage and failure analyses of 3D4d braided composite shafts under torsional load and the effects of braid processing parameters on their torsional properties

Ya Wang et al.

Summary: This paper presents numerical and experimental studies on the torsional properties of 3D braided composite shafts, with a focus on the effects of yarn orientations on the shafts under torsional load. The research found that transverse shear-tension damage of longitudinally compressive yarns is critical under torsional load, with internal damage being more severe than surface damage in the final failure morphology. Additionally, the study reports on the effects of braid processing parameters on torsional properties, confirming a dependency of increasing then decreasing peak values around an average braiding angle of 45°.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Mechanics

Experimental evaluation of carbon fibre, fibreglass and aramid tubular braided composites under combined tension-torsion loading

Abbas Armanfard et al.

Summary: This study compared the mechanical properties of carbon fiber, fiberglass, and aramid 2D tubular braided composites under combined tension-torsion loading, investigating the failure mechanism of braids using plane stress theory. Detailed and continuous strain maps were obtained using a contact-free three-dimensional digital image correlation (3D DIC) technique to understand the buckling behavior of tubular braided composites.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

3D-DIC strain field measurements in bolted and hybrid bolted-bonded joints of woven carbon-epoxy composites

Masoud Mehrabian et al.

Summary: In this study, the 3D digital image correlation technique was used to study the tensile behaviors of single-lap bolted and hybrid bolted-bonded joints. The results show that hybridization can mitigate stress concentration around bolts, delay damage initiation, reduce secondary bending and twisting, and improve strength retention, while maintaining a balance between bypass and bearing loads in multi-bolt fastened joints.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review: Textile-based natural fibre-reinforced polymeric composites in automotive lightweighting

Sandeep Olhan et al.

Summary: This review highlights the advantages and applications of textile fiber-reinforced composites in the automotive industry from an environmental perspective, emphasizing the environmental-friendly characteristics, excellent mechanical properties, and increasing production rate of natural fiber composites.

JOURNAL OF MATERIALS SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

The Influence of the Environment for Glass-Reinforced Plastic Composite Material Used for Ground Water Transport Pipes

Ana Diana Ancas et al.

Summary: This study aimed to investigate the influence of soil pH on GRP composite materials in different conditions. The research findings suggest that acidic soil significantly reduces the lifespan of pipes, which should be taken into consideration during the design phase of underground pipelines.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of Fiber Orientation on Impact Resistance Behavior of Woven Sisal Fiber Reinforced Polyester Composite

Genetu A. Dress et al.

Summary: Experimental characterization of impact resistance behavior on woven sisal fiber reinforced polyester composite materials was conducted. It was found that 45 degrees/-45 degrees orientation exhibited higher impact strength compared to other orientations. Understanding the impact behavior with different fiber orientations is crucial for material performance evaluation.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Composites

Following the effect of braid architecture on performance and damage of carbon fibre/epoxy composite tubes during torsional straining

Yuan Chai et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of the failure responses of filament wound and pre-preg wrapped glass fiber/epoxy composite tubes under quasi-static torsional loading

Ibrahim Fadil Soykok et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Mechanics

Effect of hybridization on the impact properties of flax/basalt epoxy composites: Influence of the stacking sequence

M. R. Ricciardi et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Mechanics

Energy absorption capability of date palm leaf fiber reinforced epoxy composites rectangular tubes

E. Mahdi et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Hybridization of Hemp Fiber and Recycled-Carbon Fiber in Polypropylene Composites

Niyati Shah et al.

SUSTAINABILITY (2019)

添加到收藏夹

Review Polymer Science

Recent progress on natural fiber hybrid composites for advanced applications: A review

M. J. Mochane et al.

EXPRESS POLYMER LETTERS (2019)

添加到收藏夹

Article Engineering, Mechanical

Effect of carbon fiber winding layer on torsional characteristics of filament wound composite shafts

Mateen Tariq et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Torsional Behaviour and Finite Element Analysis of the Hybrid Laminated Composite Shafts: Comparison of VARTM with Vacuum Bagging Manufacturing Method

Mehmet Emin Tasdelen et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)

添加到收藏夹

Article Engineering, Manufacturing

Fracture and Mechanical Characteristics Degradation of Glass Fiber Reinforced Petroleum epoxy Pipes

Mohammed Y. Abdellah et al.

JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION (2016)

添加到收藏夹

Article Engineering, Manufacturing

Lateral crushing properties of non-woven kenaf (mat)-reinforced epoxy composite hexagonal tubes

Munir Faraj Almbrouk Alkbir et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Energy absorption and load carrying capability of woven natural silk epoxy-triggered composite tubes

R. A. Eshkoor et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Engineering, Mechanical

A progressive damage model for fiber reinforced plastic composites subjected to impact loading

S. H. Xin et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf-aramid hybrid laminated composites

R. Yahaya et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Compressive behaviour of natural fibre composite

Bartosz T. Weclawski et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Lateral crushing of empty and polyurethane-foam filled natural flax fabric reinforced epoxy composite tubes

Libo Yan et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Materials Science, Composites

Analysis of curaua/glass hybrid interlayer laminates

Clarissa C. Angrizani et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of torsional strain-rate and lay-up sequences on the performance of hybrid composite shafts

Ercan Sevkat et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites

M. Ramesh et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites

Daiane Romanzini et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Engineering, Mechanical

Micromechanical analysis of off-axis loading of fiber reinforced composites with imperfect interface bonding

Xuefeng Chen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)

添加到收藏夹

Article Engineering, Environmental

Mechanical and Dynamic Mechanical Analysis of Woven Banana/Epoxy Composite

N. Venkateshwaran et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2012)

添加到收藏夹

Review Chemistry, Applied

Biofibres and biocomposites

Maya Jacob John et al.

CARBOHYDRATE POLYMERS (2008)

添加到收藏夹

Article Materials Science, Composites

Comparison of mechanical properties of epoxy composites reinforced with stitched glass and carbon fabrics:: Characterization of mechanical anisotropy in composites and investigation on the interaction between fiber and epoxy matrix

Volkan Cecen et al.

POLYMER COMPOSITES (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elastic properties, notched strength and fracture criterion in untreated woven jute-glass fabric reinforced polyester hybrid composites

K. Sabeel Ahmed et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Engineering, Manufacturing

Progressive damage modeling in fiber-reinforced materials

Ireneusz Lapczyk et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Engineering, Manufacturing

Effects of environmental aging on the mechanical properties of bamboo-glass fiber reinforced polymer matrix hybrid composites

MM Thwe et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)

添加到收藏夹

Article Materials Science, Composites

The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres

MS Sreekala et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.