☆ 4.7 Article

Effects of post-fracture repeated impacts and short-term temperature gradients on monolithic glass elements bonded by safety films

COMPOSITE STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Civil

Temperature effects on the behaviour of liquid-laminated embedded glass connections

Efstratios Volakos et al.

Summary: This study investigates the structural behavior of embedded load-bearing laminated glass connections at different temperatures through experiments and numerical simulations. The experimental results show that the response of the resin interlayer is dependent on time and temperature, significantly affecting the stiffness and strength of the connection. Temperature also determines the failure mechanism of the connection. A simplified analytical tool is developed to predict the load-displacement response of the embedded connection at different temperatures and load durations.

ENGINEERING STRUCTURES (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Experimental and Numerical Peeling Investigation on Aged Multi-Layer Anti-Shatter Safety Films (ASFs) for Structural Glass Retrofit

Silvana Mattei et al.

Summary: This paper focuses on the impact response of glass elements bonded with Polyethylene terephthalate (PET)-films and pressure sensitive adhesives (PSAs), and presents an experimental study and numerical analysis of the mechanical parameters of heat-applied films. The results indicate that the peel test outcomes are influenced by the rate dependence and aging dependence.

SYMMETRY-BASEL (2022)

添加到收藏夹

Review Engineering, Chemical

A review on failure theories and simulation models for adhesive joints

Konstantinos Tserpes et al.

Summary: This study summarizes the research outcomes of certification of bonded joints for primary structural applications under the framework of Cost Action CERTBOND, with a detailed description of nine different models and theories.

JOURNAL OF ADHESION (2022)

添加到收藏夹

Article Engineering, Geological

Considerations on efficient procedural steps for seismic capacity assessment and diagnostics of historic structural glass systems

Chiara Bedon et al.

Summary: Structural designers are supported by standards and guidelines to optimize the mechanical performance and safety of glass load-bearing elements and assemblies in buildings. Attention is given to deformation and stress check, post-breakage verification, and performance limits for extreme events. The paper also addresses the vulnerability and capacity of existing/historic glass components and systems, proposing procedural methodology steps and the use of non-destructive and numerical methods for diagnostic and characterization purposes.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Characterization & Testing

Low-velocity single and repeated impact behavior of 3D printed honeycomb cellular panels

Gizem Acar Yavuz et al.

Summary: This study investigates the low velocity impact behaviors of 3D printed curved honeycomb cellular panels used for impact protection. The energy absorbing capacity of the panels is predicted through evaluating the results. Furthermore, the changes in the fundamental free vibration frequencies of the panels after impact are examined to determine the presence of damage. The effect of curvature on the damage mechanisms of 3D printed honeycomb panels is studied through contact force-deformation curves, energy profile diagrams, and SEM images, with the experimental results showing that the radius of curvature greatly affects the impact and free vibration behavior.

MATERIALS TESTING (2022)

添加到收藏夹

Article Construction & Building Technology

A durable coating to prevent stress corrosion effects on the surface strength of annealed glass

Gregorio Mariggio et al.

Summary: The study examines the durability of an innovative polymeric coating developed by the authors to prevent stress corrosion in annealed glass. Results show that the proposed formulation is almost insensitive to cyclic loading, maintains good performance in case of natural weathering, and is slightly more sensitive to artificial weathering.

GLASS STRUCTURES & ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Multistep Experimental Calibration of Mechanical Parameters for Modelling Multilayer Antishatter Safety Films in Structural Glass Protection

Chiara Bedon et al.

Summary: This research study presents an experimental program to obtain key input mechanical parameters required for the numerical analysis of glass elements protected by multilayer antishatter safety films (ASFs). In addition, small-scale peel and tensile tests on ASF samples, as well as Operational Modal Analysis (OMA) techniques on ASF-bonded glass elements, were conducted.

MATHEMATICAL PROBLEMS IN ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Structural performance of a novel liquid-laminated embedded connection for glass

Efstratios Volakos et al.

Summary: A new type of adhesive connection for glass applications, involving embedded laminated glass connections, has been proposed and examined in this study. The mechanical response of this connection was assessed through numerical analyses and physical tests, revealing significant effects of the displacement rate on the connection's performance. Numerical analysis in Abaqus showed that the complex stress state near the connection is a result of two load-transfer mechanisms.

GLASS STRUCTURES & ENGINEERING (2021)

添加到收藏夹

Article Engineering, Chemical

Effect of elevated temperatures and humidity on glass/steel adhesive joints

Ioannis Katsivalis et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

添加到收藏夹

Article Engineering, Civil

Experimental investigation of temperature and loading rate effects on the initial shear stiffness of polymeric interlayers

Tomas Hana et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Diagnostic analysis and dynamic identification of a glass suspension footbridge via on-site vibration experiments and FE numerical modelling

Chiara Bedon

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical characterization of polyvinil butyral from static and modal tests on laminated glass beams

M. Lopez-Aenlle et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Issues on the Vibration Analysis of In-Service Laminated Glass Structures: Analytical, Experimental and Numerical Investigations on Delaminated Beams

Chiara Bedon

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Construction & Building Technology

Vibration Analysis and Dynamic Characterization of Structural Glass Elements with Different Restraints Based on Operational Modal Analysis

Chiara Bedon et al.

BUILDINGS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Transparency in Structural Glass Systems Via Mechanical, Adhesive, and Laminated Connections - Existing Research and Developments

Chiara Bedon et al.

ADVANCED ENGINEERING MATERIALS (2018)

添加到收藏夹

Article Mechanics

Laminated glass beams with thick embedded connections - Numerical analysis of full-scale specimens during cracking regime

Chiara Bedon et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Single and repeated impact behaviors of bio-sandwich structures consisting of thermoplastic face sheets and different balsa core thicknesses

Okan Ozdemir et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and simulation studies on delamination strength of laminated glass composites having polyvinyl butyral and ethyl vinyl acetate inter-layers of different critical thicknesses

Ajitanshu Vedrtnam

DEFENCE TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

Adhesive joints in glass structures: effects of various materials in the connection, thickness of the adhesive layer, and ageing

Klara Machalicka et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)

添加到收藏夹

Article Engineering, Civil

Study of the time-temperature-dependent behaviour of PVB: Application to laminated glass elements

F. Pelayo et al.

THIN-WALLED STRUCTURES (2017)

添加到收藏夹

Article Construction & Building Technology

Durability of different glass coatings in humid and saline environments, ageing impact on heat-light transmission and thermal comfort

F. Stazi et al.

BUILDING AND ENVIRONMENT (2016)

添加到收藏夹

Article Engineering, Civil

Durability of adhesive glass-metal connections for structural applications

Bert Van Lancker et al.

ENGINEERING STRUCTURES (2016)

添加到收藏夹

Article Acoustics

Vibration-based delamination detection in composite beams through frequency changes

Zhifang Zhang et al.

JOURNAL OF VIBRATION AND CONTROL (2016)

添加到收藏夹

Article Mechanics

Compression after impact strength of repaired GFRP composite laminates under repeated impact loading

J. Jefferson Andrew et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Construction & Building Technology

Dynamic torsion tests to characterize the thermo-viscoelastic properties of polymeric interlayers for laminated glass

Laura Andreozzi et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Engineering, Mechanical

Experimental study on the dynamic behaviour of glass fitted with safety window film with a small-scale drop weight set-up

Sam Van Dam et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

The design of laminated glass under time-dependent loading

Laura Galuppi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

添加到收藏夹

Proceedings Paper Construction & Building Technology

Long-term laminated glass four point bending test with PVB, EVA and SG interlayers at different temperatures

Tomas Serafinavicius et al.

MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES (2013)

添加到收藏夹

Article Engineering, Civil

Effective thickness of laminated glass beams: New expression via a variational approach

Laura Galuppi et al.

ENGINEERING STRUCTURES (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.