☆ 4.7 Article

Experimental and analytical investigation on the use of NSM-BFRP and NSM-GFRP bars in strengthening corrosion-damaged RC slabs

COMPOSITE STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Comparative study on the bond performance of near-surface mounted fiber-reinforced polymer bars

Omar Aljidda et al.

Summary: This paper presents the results of a large study on the bond performance of near-surface mounted (NSM) fiber-reinforced polymer (FRP) bars. The study investigated the effects of different parameters on bond strength and failure mode. The results showed that the NSM-Gel adhesive outperformed other adhesives in developing bond strength, and the NSM-BFRP and GFRP bars showed similar bond strengths while the NSM-CFRP bars had the highest strength.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Construction & Building Technology

Integrated High-Performance Concrete Beams Reinforced with Hybrid BFRP and Steel Bars

Xin Wang et al.

Summary: The flexural behavior of concrete beams reinforced with a combination of basalt fiber-reinforced polymer (BFRP) bars and steel bars was investigated. The study found that the hybrid reinforcement enhanced the strength and deformability reserve of the beams, but also resulted in an increase in ultimate load and ultimate deflection.

JOURNAL OF STRUCTURAL ENGINEERING (2022)

添加到收藏夹

Article Oceanography

Fatigue bond behaviour between basalt fibre-reinforced polymer bars and seawater sea-sand concrete

Zhe Xiong et al.

Summary: Basalt fibre-reinforced polymer (BFRP) bar-reinforced seawater sea-sand concrete (SSSC) structures have long-term development significance. This study thoroughly investigated the fatigue bond performance between BFRP bars and SSSC to understand the fatigue bond mechanism. The influence of concrete strength, bar diameters, surface shapes of BFRP bars, and stress levels on the fatigue bond behavior were studied through fatigue pull-out tests.

OCEAN & COASTAL MANAGEMENT (2022)

添加到收藏夹

Article Mechanics

Bond behaviour of recycled aggregate concrete with basalt fibre-reinforced polymer bars

Zhe Xiong et al.

Summary: This study investigated the bond performance of recycled aggregate concrete structures reinforced with fibre-reinforced polymer bars, highlighting the effective corrosion prevention and the key factors influencing bond performance. The findings provide valuable insights for improving the application and design potential of such structures.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Experimental study on fatigue bond behaviour between basalt fibre-reinforced polymer bars and recycled aggregate concrete

Rui Zou et al.

Summary: This study systematically investigated the fatigue bond behaviour between basalt fibre-reinforced polymer (BFRP) bars and recycled aggregate concrete (RAC), and revealed the effects of design parameters on bond performance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Mechanics

Bond durability of BFRP bars embedded in concrete with fly ash in aggressive environments

Zhongyu Lu et al.

Summary: FRP bars are a green alternative to steel in marine concrete structures due to their resistance to chloride ions, but they can degrade in the strong alkaline environment of concrete. The addition of fly ash in concrete can improve the bond strength between basalt FRP bars and concrete, mitigating the negative effects of degradation on the long-term performance of the structures.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Flexural behavior of reinforced concrete T-section beams strengthened by NSM FRP bars

Y. Zhang et al.

Summary: This study investigates the behavior of RC T-section beams strengthened with NSM FRP bars and compares the experimental results with predictions of a flexural model. The results show a general increase in flexural stiffness of the strengthened beams, especially at the post yield stage of loading.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Concrete Columns Reinforced with GFRP and BFRP Bars under Concentric and Eccentric Loads: Experimental Testing and Analytical Investigation

Nouran Elmesalami et al.

Summary: The study tested twelve concrete columns reinforced with FRP bars under concentric and eccentric loadings, finding that columns reinforced with BFRP and GFRP had similar load-carrying capacities, lower than their steel-reinforced counterparts, with a more pronounced impact of increasing reinforcement ratio on eccentric columns. The contribution of GFRP and BFRP bars to column capacity was similar, while ignoring the strength contribution of FRP bars in design codes may lead to conservative predictions.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2021)

添加到收藏夹

Article Construction & Building Technology

Bond and flexural performance of basalt fiber-reinforced polymer bar-reinforced seawater sea sand glass aggregate concrete beams

Zhiqiang Dong et al.

Summary: This article proposes a new type of BFRP bar-reinforced SSGC beam for ocean engineering, and investigates the bond behavior between BFRP bars and SSGC with different glass aggregate ratios. The experimental results showed that although the compressive strength of SSGC decreased with increased glass aggregate content, the bond performance between BFRP bars and SSGC remained stable.

ADVANCES IN STRUCTURAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Flexural Behavior of Basalt Fiber-Reinforced Concrete Slab Strips with BFRP Bars: Experimental Testing and Numerical Simulation

Karim Attia et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2020)

添加到收藏夹

Review Construction & Building Technology

Fiber-reinforced polymers bars for compression reinforcement: A promising alternative to steel bars

Nouran Elmessalami et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Civil

Experimental and finite element investigation of the shear performance of BFRP-RC short beams

Farid Abed et al.

STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of patch repair and strengthening with EBR and NSM CFRP laminates for RC beams with low, medium and heavy corrosion

Garyfalia G. Triantafyllou et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Mechanics

Effect of corrosion damage on the flexural performance of RC beams strengthened with FRCM composites

Mohammed Elghazy et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Construction & Building Technology

Flexural experiment and stiffness investigation of reinforced concrete beam under chloride penetration and sustained loading

Yang Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Bond degradation of basalt fiber-reinforced polymer (BFRP) bars exposed to accelerated aging conditions

Ahmad Altalmas et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Article Engineering, Civil

Corrosion Aging of Reinforced Concrete T-Girders Strengthened with Near-Surface-Mounted Composites

Tamer El-Maaddawy et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

添加到收藏夹

Article Engineering, Civil

Bond Durability of Basalt Fiber-Reinforced Polymer Bars Embedded in Concrete under Direct Pullout Conditions

Ahmed El Refai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

添加到收藏夹

Article Construction & Building Technology

Bond characteristics of near surface mounted CFRP bars

W. K. K. G. Kalupahana et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Construction & Building Technology

Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete

I. A. Sharaky et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Construction & Building Technology

Effect of chloride-induced reinforcing steel corrosion on the flexural strength of reinforced concrete beams

Jin Xia et al.

MAGAZINE OF CONCRETE RESEARCH (2012)

添加到收藏夹

Article Engineering, Civil

Bond Efficiency of EBR and NSM FRP Systems for Strengthening Concrete Members

A. Bilotta et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)

添加到收藏夹

Article Mechanics

Strengthening of RC members with near-surface mounted CFRP rods

Firas Al-Mahmoud et al.

COMPOSITE STRUCTURES (2009)

添加到收藏夹

Article Engineering, Multidisciplinary

Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures

L. De Lorenzis et al.

COMPOSITES PART B-ENGINEERING (2007)

添加到收藏夹

Article Construction & Building Technology

Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete

TA El Maaddawy et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.