☆ 4.4 Article

Experimental and statistical analysis of MWCNT hybrid nanofluid-based multi-functional drilling fluid

CHEMICAL PAPERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Nanofluids: Key parameters to enhance thermal conductivity and its applications

Hammad Younes et al.

Summary: This review discusses the applications of nanofluids and their impact on thermal behavior and thermal conductivity by examining various parameters. It highlights the challenges and limitations posed by these parameters on heat transfer and commercialization efforts of nanofluids.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Optimization of carbon nanotubes synthesis via pyrolysis over Ni/Al2O3 using response surface methodology

Djamila Boufades et al.

Summary: In this study, Algerian condensate gas over Ni/Al2O3 was used for the preparation of low-cost and pure carbon nanotubes through chemical vapor deposition. Response surface methodology was employed to optimize the preparation parameters, with the best conditions found to be a catalyst/condensate gas mass ratio of 5%, a synthesis time of 112 minutes, and a temperature of 1000 degrees Celsius. The high-quality CNTs produced under these optimum conditions had diameters of 10 nm, with a predicted carbon yield of 81.76%.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Recent Advances in the Applications of Green Synthesized Nanoparticle Based Nanofluids for the Environmental Remediation.

Shriram S. Sonawane et al.

CURRENT PHARMACEUTICAL BIOTECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Ecological optimization and LCA of TiO2-SiC/ water hybrid nanofluid in a shell and tube heat exchanger by ANN

Manjakuppam Malika et al.

Summary: This study estimates the environmental impact and cost model for the early-stage design of a shell and tube heat exchanger (STHE), and compares the effectiveness of using nanofluid in the chemical processing industry. The results show that nanofluids improve heat transfer and have higher economic value compared to typical coolant systems. The suggested novel method is cost-effective and environmentally feasible.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Combine effect of graphene oxide, pure-bore and sodium alginate on rheological and filtration properties and cutting carrying capacity of water-based drilling fluid

Shaine Mohammadali Lalji et al.

Summary: Rheological and filtration properties are crucial for a successful drilling operation. This study investigates the combined influence of graphene oxide, pure-bore, and sodium alginate on the rheological and filtration properties of water-based drilling fluid. The results highlight the importance of particle concentration for the performance of the drilling fluid system.

CHEMICAL PAPERS (2022)

添加到收藏夹

Article Chemistry, Physical

MSG extraction using silicon carbide-based emulsion nanofluid membrane: Desirability and RSM optimisation

Manjakuppam Malika et al.

Summary: Seasonings have become popular for enhancing food flavor recently. However, many users are unaware of the ingredients in these seasonings and are only concerned about tasty food rather than their health effects. This study focused on extracting monosodium glutamate (MSG) from a simulated polluted solution using an emulsion liquid membrane (ELM), which is an effective extraction and stripping process. The stability of the emulsion limits the industrial application of ELM, so the study replaced the membrane phase with a silicon carbide based nanofluid to form an emulsion nanofluid membrane (ENM). The enhanced dispersion stability of the nanofluid ensured the effectiveness of the extraction process. Additionally, a three level RSM-CCD model was used to optimize parameters such as nanofluid concentration, ultrasonication time, surfactant concentration, and carrier concentration. The ENM proved to be the most efficient and recyclable method for MSG extraction.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Acoustics

Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids ? A systematic overview

Madderla Sandhya et al.

Summary: The optimum ultrasonication time plays a crucial role in enhancing the heat transfer performance of nanofluids, affecting their dispersion and stability in base fluids. Various preparation techniques can influence the thermophysical properties of nanofluids, with ultrasonication method being a highly effective approach to improve dispersion and thermal conductivity.

ULTRASONICS SONOCHEMISTRY (2021)

添加到收藏夹

Article Thermodynamics

Application of RSM and ANN for the prediction and optimization of thermal conductivity ratio of water based Fe2O3 coated SiC hybrid nanofluid

Manjakuppam Malika et al.

Summary: A novel water-based hybrid nanofluid was synthesized and the thermal conductivity ratio was predicted using artificial neural network (ANN) and response surface methodology (RSM) with optimized nanoparticle mixing ratio, demonstrating the effectiveness of both methods in predicting the thermal conductivity ratio of the nanofluid.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Chemical

CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert

M. E. Nakhchi et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Magnetic nanofluid: synthesis and characterization

Paritosh Agnihotri et al.

CHEMICAL PAPERS (2020)

添加到收藏夹

Article Chemistry, Physical

Experimental investigation and rheological behaviors of water-based drilling mud contained starch-ZnO nanofluids through response surface methodology

Limo Salehnezhad et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

添加到收藏夹

Article Chemistry, Physical

Preparation and characterization FeS2 quantum dots -SnO2/MWCNTs nanocomposites for photocatalytic process with response surface methodology

Hamed Ahmadi Kamazani et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2019)

添加到收藏夹

Article Chemistry, Physical

Thermoresponsive Bentonite for Water-Based Drilling Fluids

Wenxin Dong et al.

MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Size controllable synthesis of graphene water nanofluid with enhanced stability

Baolei Du et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2019)

添加到收藏夹

Article Chemistry, Physical

Optimized preparation of nitrogen-doped carbon dots by response surface methodology and application in Cd2+ detection

Jiliang Yang et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2019)

添加到收藏夹

Article Energy & Fuels

Experimental investigation of the effects of silica nanoparticle on hole cleaning efficiency of water-based drilling mud

Afeez O. Gbadamosi et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Chemical

An experimental study on the stability and thermal conductivity of water-ethylene glycol/TiO2-MWCNTs hybrid nanofluid: Developing a new correlation

Alireza Akhgar et al.

POWDER TECHNOLOGY (2018)

添加到收藏夹

Review Energy & Fuels

Nano-Based Drilling Fluids: A Review

Zisis Vryzas et al.

ENERGIES (2017)

添加到收藏夹

Article Chemistry, Physical

Stability, viscosity, thermal conductivity, and electrical conductivity enhancement of multi-walled carbon nanotube nanofluid using gum arabic

P. Ganesh Kumar et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Water-based drilling fluids: the contribution of xanthan gum and carboxymethylcellulose on filtration control

Railson C. S. da Luz et al.

CHEMICAL PAPERS (2017)

添加到收藏夹

Article Chemistry, Physical

Factors Influencing the Rheological Behavior of Carbon Nanotube Water-Based Nanofluid

Kavita Soma et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A field application of nanoparticle-based invert emulsion drilling fluids

Alexey S. Borisov et al.

JOURNAL OF NANOPARTICLE RESEARCH (2015)

添加到收藏夹

Article Energy & Fuels

Wettability Alteration of Sandstone Cores by Alumina-Based Nanofluids

Juliana Giraldo et al.

ENERGY & FUELS (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Synthesis of silver nanoparticle decorated multiwalled carbon nanotubes-graphene mixture and its heat transfer studies in nanofluid

Tessy Theres Baby et al.

AIP ADVANCES (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Graphene Oxide as a High-Performance Fluid-Loss-Control Additive in Water-Based Drilling Fluids

Dmitry V. Kosynkin et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of ultrasound treatment on the particle-size of Wyoming bentonite in aqueous suspensions

I Lapides et al.

JOURNAL OF MATERIALS SCIENCE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.