相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Combined silicon carbide and zirconia open cell foams for the process intensification of catalytic methane combustion in lean conditions: Impact on heat and mass transfer
Carmen W. Moncada Quintero et al.
CHEMICAL ENGINEERING JOURNAL (2022)
Demonstration of the Influence of Specific Surface Area on Reaction Rate in Heterogeneous Catalysis
Pawel Bernard et al.
JOURNAL OF CHEMICAL EDUCATION (2021)
Analysis of heat and mass transfer limitations for the combustion of methane emissions on PdO/Co3O4 coated on ceramic open cell foams
Carmen W. Moncada Quintero et al.
CHEMICAL ENGINEERING JOURNAL (2021)
The Effect of Catalyst Placement on the Stability of a U-Bend Catalytic Heat-Recirculating Micro-Combustor: A Numerical Investigation
Niket S. Kaisare et al.
CATALYSTS (2021)
Heat Transport in Open-Cell Foams: CFD Analysis of Artificial Heat Sources vs Fully Resolved Exothermal Reactions
Christoph Sinn et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)
The Effect of Differentiating the Thermal Conductivity between Inner and Outer Walls on the Stability of a U-Bend Catalytic Heat-Recirculating Micro-Combustor: A CFD Study
Valeria Di Sarli
APPLIED SCIENCES-BASEL (2021)
Investigation of packed conductive foams as a novel reactor configuration for methane steam reforming
Riccardo Balzarotti et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Open-cell foams as catalysts support: A systematic analysis of the mass transfer limitations
A. Aguirre et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Pore -scale analysis of axial and radial dispersion coefficients of gas flow in macroporous foam monoliths using NMR-based displacement measurements
Mojtaba Mirdrikvand et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Open Cell Metal Foam as Extended Coolant Surface - Fuel Cell Application
Y. Vazifeshenas et al.
FUEL CELLS (2020)
Computed tomography based modelling of the behaviour of closed cell metallic foams using a shell approximation
A. Ghazi et al.
MATERIALS & DESIGN (2020)
Analysis of the effective thermal conductivity of isotropic and anisotropic Periodic Open Cellular Structures for the intensification of catalytic processes
Mauro Bracconi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Foam trapping in a 3D porous medium:in situobservations by ultra-fast X-ray microtomography
Raphael Poryles et al.
SOFT MATTER (2020)
Design of three-layered struts in SiC reticulated porous ceramics for porous burner
Xiong Liang et al.
CERAMICS INTERNATIONAL (2019)
Investigation of pressure drop in 3D replicated open-cell foams: Coupling CFD with experimental data on additively manufactured foams
Mauro Bracconi et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Insights into coated NiCrAl open-cell foams for the catalytic partial oxidation of CH4
Phuoc Hoang Ho et al.
REACTION CHEMISTRY & ENGINEERING (2019)
Analysis of Ru/La-Al2O3 catalyst loading on alumina monoliths and controlling regimes in methane steam reforming
M. Arsalan Ashraf et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Additive Manufactured open cell polyhedral structures as substrates for automotive catalysts
V. Papetti et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Modelling complete methane oxidation over palladium oxide in a porous catalyst using first-principles surface kinetics
Carl-Robert Floren et al.
CATALYSIS SCIENCE & TECHNOLOGY (2018)
Three-dimensional grain mapping of open-cell metallic foam by integrating synthetic data with experimental data from high-energy X-ray diffraction microscopy
Jayden C. Plumb et al.
MATERIALS CHARACTERIZATION (2018)
Comparative Study Between Aluminum Monolith and Foam as Carriers for The Intensification of The CO Water Gas Shift Process
Vincenzo Palma et al.
CATALYSTS (2018)
Rh/CeO2 Thin Catalytic Layer Deposition on Alumina Foams: Catalytic Performance and Controlling Regimes in Biogas Reforming Processes
Cristina Italiano et al.
CATALYSTS (2018)
Optimal combustor dimensions for the catalytic combustion of methane-air mixtures in micro-channels
Junjie Chen et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Catalytic Performance of Pd/Co3O4 on SiC and ZrO2 Open Cell Foams for Process Intensification of Methane Combustion in Lean Conditions
Giuliana Ercolino et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Application of Open Pore Cellular Foam for air breathing PEM fuel cell
A. Baroutaji et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
X-ray micro computed tomography characterization of cellular SiC foams for their applications in chemical engineering
Xiaoxia Ou et al.
MATERIALS CHARACTERIZATION (2017)
Two-scale study of the fracture of an aluminum foam by X-ray tomography and finite element modeling
Clemence Petit et al.
MATERIALS & DESIGN (2017)
Solution Combustion Synthesis for Preparation of Structured Catalysts: A Mini-Review on Process Intensification for Energy Applications and Pollution Control
S. Specchia et al.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2017)
Catalytic combustion of residual methane on alumina monoliths and open cell foams coated with Pd/Co3O4
Giuliana Ercolino et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Analytical Geometrical Model of Open Cell Foams with Detailed Description of Strut-Node Intersection
Matteo Ambrosetti et al.
CHEMIE INGENIEUR TECHNIK (2017)
Optimization of Pd catalysts supported on Co3O4 for low-temperature lean combustion of residual methane
Giuliana Ercolino et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2017)
A systematic procedure for the virtual reconstruction of open-cell foams
Mauro Bracconi et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Heat transfer performance of structured catalytic reactors packed with metal foam supports: Influence of wall coupling
S. Razza et al.
CATALYSIS TODAY (2016)
Development of a new pressure drop correlation for open-cell foams based completely on theoretical grounds: Taking into account strut shape and geometric tortuosity
Amer Inayat et al.
CHEMICAL ENGINEERING JOURNAL (2016)
CFD modeling of catalytic reactions in open-cell foam substrates
A. Della Torre et al.
COMPUTERS & CHEMICAL ENGINEERING (2016)
Experimental investigation of convective heat transfer in an open-cell aluminum foams
A. Hamadouche et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)
Highly Porous Zirconia Ceramic Foams with Low Thermal Conductivity from Particle-Stabilized Foams
Wen-Long Huo et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Commercial Applications of Metal Foams: Their Properties and Production
Francisco Garcia-Moreno
MATERIALS (2016)
Flow Regime Transition in Open-Cell Solid Foam Packed Reactors: Adaption of the Relative Permeability Concept and Experimental Validation
Johannes Zalucky et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
GEOMETRICAL CHARACTERIZATION OF KELVIN-LIKE METAL FOAMS FOR DIFFERENT STRUT SHAPES AND POROSITY
Prashant Kumar et al.
JOURNAL OF POROUS MEDIA (2015)
Performance of randomized Kelvin cell structures as catalytic substrates: Mass-transfer based analysis
Francesco Lucci et al.
CHEMICAL ENGINEERING SCIENCE (2014)
Methane/air premixed combustion in a two-layer porous burner with different foam materials
H. B. Gao et al.
FUEL (2014)
Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks
Taek Bo Kim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Heat transfer properties of metal foam supports for structured catalysts: Wall heat transfer coefficient
Enrico Bianchil et al.
CATALYSIS TODAY (2013)
Accurate prediction of the effective radial conductivity of highly conductive honeycomb monoliths with square channels
Carlo Giorgio Visconti et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Structure of foams modeled by Laguerre-Voronoi tessellations
T. Wejrzanowski et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Air forced convection through metal foams: Experimental results and modeling
Simone Mancin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method
Toru Shimizu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Activation of metallic open-cell foams via washcoat deposition of Ni/MgAl2O4 catalysts for steam reforming reaction
Cinzia Cristiani et al.
CATALYSIS TODAY (2012)
A PEM fuel cell with metal foam as flow distributor
Chung-Jen Tseng et al.
ENERGY CONVERSION AND MANAGEMENT (2012)
On the Kelvin Problem
Antonino Favata
JOURNAL OF ELASTICITY (2012)
Determining the specific surface area of ceramic foams: The tetrakaidecahedra model revisited
Amer Inayat et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Aging of reticulated Si-SiC foams in porous burners
A. Ortona et al.
ADVANCES IN APPLIED CERAMICS (2010)
Comparison of ceramic honeycomb monolith and foam as Ni catalyst carrier for methane autothermal reforming
Paolo Ciambelli et al.
CATALYSIS TODAY (2010)
Heat transfer during air flow in aluminum foams
Simone Mancin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
Statistical distribution of residence time and tortuosity of flow through open-cell foams
P. Habisreuther et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Pressure drop measurements of ceramic sponges-Determining the hydraulic diameter
Benjamin Dietrich et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Towards a more realistic modeling of solid foam: Use of the pentagonal dodecahedron geometry
Tri Truong Huu et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Morphological Characterization of Ceramic Sponges for Applications in Chemical Engineering
Julia Grosse et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)
Volume image analysis of ceramic sponges
Julia Grosse et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2008)
Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porosities
G. Incera Garrido et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Generalized correlation for gas/solid mass-transfer coefficients in metallic and ceramic foams
Gianpiero Groppi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)
Fundamentals and applications of structured ceramic foam catalysts
Martyn V. Twigg et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)
Pressure drop measurements and modeling on SiC foams
Maxime Lacroix et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Optimal reactor dimensions for homogeneous combustion in small channels
N. S. Kaisare et al.
CATALYSIS TODAY (2007)
Self-consistent open-celled metal foam model for thermal applications
Eric N. Schmierer et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)
Open celled material structural properties measurement: From morphology to transport properties
Jerome Vicente et al.
MATERIALS TRANSACTIONS (2006)
X-ray computed tomography image analysis to explain the airflow resistance differences in grain bulks
S. Neethirajan et al.
BIOSYSTEMS ENGINEERING (2006)
Honeycomb supports with high thermal conductivity for gas/solid chemical processes
G Groppi et al.
CATALYSIS TODAY (2005)
Mass-transfer characterization of metallic foams as supports for structured catalysts
L Giani et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
Surface area estimation of digitized 3D objects using weighted local configurations
J Lindblad
IMAGE AND VISION COMPUTING (2005)
Porous materials as open volumetric solar receivers: Experimental determination of thermophysical and heat transfer properties
T Fend et al.
ENERGY (2004)
Permeability of ceramic foams to compressible and incompressible flow
EA Moreira et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
The 3D structure of real polymer foams
MD Montminy et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2004)
Simulations of flow through open cell metal foams using an idealized periodic cell structure
K Boomsma et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2003)
Properties of ceramic foam catalyst supports: mass and heat transfer
JT Richardson et al.
APPLIED CATALYSIS A-GENERAL (2003)
Ceramic foam monoliths as catalyst carriers. 1. Adjustment and description of the morphology
FC Buciuman et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2003)
Structure of random monodisperse foam
AM Kraynik et al.
PHYSICAL REVIEW E (2003)
On the road again: Metal foams find favor
J Banhart et al.
PHYSICS TODAY (2002)
Thermophysical properties of high porosity metal foams
A Bhattacharya et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
Generation of a finite element MESH from stereolithography (STL) files
E Bechet et al.
COMPUTER-AIDED DESIGN (2002)
Theory and applications of ceramic foam catalysts
MV Twigg et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2002)
Synthesis of high porosity, monolithic alumina aerogels
JF Poco et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2001)
Properties of ceramic foam catalyst supports: pressure drop
JT Richardson et al.
APPLIED CATALYSIS A-GENERAL (2000)
分享论文
