☆ 4.6 Article

Fluidized bed gas-solid heat transfer using a CFD-DEM coarse-graining technique

CHEMICAL ENGINEERING SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Coarse-grained CFD-DEM simulation of coal and biomass co-gasification process in a fluidized bed reactor: Effects of particle size distribution and operating pressure

Shaohua Du et al.

Summary: This study investigates the co-gasification process of coal and biomass in a bubbling fluidized bed gasifier using a coarse-grained computational fluid dynamics-discrete element method (CFD-DEM) simulation. The effects of particle size distribution and operating pressure on hydrodynamics, heat transfer, and co-gasification performance are analyzed. The results show that the increase in sand particle size distribution (PSD) width has a slight impact on particle concentration distribution, particle residence time distribution, and co-gasification performance. The convective heat transfer rate is significantly higher than that of conduction and radiation. An increase in PSD width leads to the formation of a vertical solid temperature gradient at the bottom of the bed due to deteriorated solid mixing. Higher operating pressure results in a decrease in bed temperature, and the variation in convective heat transfer rate dominates the heat transfer efficiency. Elevated operating pressure promotes the thermal-chemical conversion of blend fuel by accelerating the char conversion reaction.

RENEWABLE ENERGY (2023)

添加到收藏夹

Article Engineering, Chemical

A detailed gas-solid fluidized bed comparison study on CFD-DEM coarse-graining techniques

M. J. A. de Munck et al.

Summary: Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) is a numerical tool used for detailed fluidized bed studies. To overcome its computational expense, coarse-graining techniques have been developed. In this study, we compared the effectiveness of different coarse-graining scaling laws in characterizing the original system. We also demonstrated the usefulness of a continuous two-way smoothing function in achieving grid-independent solutions in CFD-DEM simulations.

CHEMICAL ENGINEERING SCIENCE (2023)

添加到收藏夹

Article Engineering, Chemical

A coarse-grained parcel method for heat and mass transfer simulations of spray coating processes

Stefan Madlmeir et al.

Summary: The Discrete Element Method (DEM) is commonly used for modeling the flow of particulate materials. To reduce computational demand, parcels are introduced by coarse graining, which requires sophisticated models to preserve the original behavior. This study extends the coarse-graining concepts by introducing models for particle-fluid mass transfer and spray deposition rate, enabling precise particle-droplet-air interaction modeling at low computational cost for spray coating processes.

ADVANCED POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Thermodynamics

Coarse-grained CFD-DEM modelling of dense gas-solid reacting flow

Shuai Wang et al.

Summary: A coarse-grained CFD-DEM model is developed to simulate dense gas-solid reacting flow, which significantly reduces computational costs. This research is important for simulating dense gas-solid reacting flow in chemical reactors.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

Hossain Aziz et al.

Summary: Fluidized bed dryer is commonly used in pharmaceutical industry for drying wet granules. A coarse grained coupled CFD-DEM method has been developed to reduce the number of particles to be tracked in the simulation and accurately simulate the dynamics of fluidized particles by scaling the interaction forces appropriately.

PHARMACEUTICAL RESEARCH (2022)

添加到收藏夹

Review Engineering, Chemical

Coarse-Grain DEM Modelling in Fluidized Bed Simulation: A Review

Alberto Di Renzo et al.

Summary: In the past decade, the application of CFD-DEM for fluidized beds has expanded from small, lab-scale units to larger scale systems, benefiting greatly from coarse graining methods. By introducing coarse graining procedures based on different physical backgrounds, the number of particles that can be simulated has increased, covering pilot-scale and industrially relevant systems. The review discusses scaling for contact forces, hydrodynamic forces, and cohesive forces, quantifying computational savings in terms of coarse graining degree and presenting recent applications and future directions in the field.

PROCESSES (2021)

添加到收藏夹

Article Engineering, Chemical

On the treatment of bed-to-wall heat transfer in CFD-DEM simulations of gas-fluidized beds

Xin Liu et al.

Summary: The study investigates the heat transfer mechanism near the confining walls in fluidized beds using two approaches, validating them with experimental results and comparing their performance in predicting overall particle temperature distribution, parameter sensitivity, and mesh resolution.

CHEMICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Fast, flexible particle simulations - An introduction to MercuryDPM

Thomas Weinhart et al.

COMPUTER PHYSICS COMMUNICATIONS (2020)

添加到收藏夹

Article Engineering, Chemical

Heat transfer in a pulsed fluidized bed by using coupled CFD-DEM method

Kai Zhang et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Hydrodynamic and Heat Transfer Study of a Fluidized Bed by Discrete Particle Simulations

Lijing Mu et al.

PROCESSES (2020)

添加到收藏夹

Review Engineering, Chemical

Review and implementation of CFD-DEM applied to chemical process systems

Shahab Golshan et al.

CHEMICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Engineering, Chemical

Validation study on a scaling law model of the DEM in industrial gas-solid flows

Yuki Mori et al.

POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Environmental

Numerical investigation of a coarse-grain discrete element method in solid mixing in a spouted bed

Kazuya Takabatake et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Engineering, Chemical

Particle-Scale Investigation of Heat Transfer and Erosion Characteristics in a Three-Dimensional Circulating Fluidized Bed

Shuai Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Article Engineering, Chemical

Effect of Superficial Gas Velocity on the Solid Temperature Distribution in Gas Fluidized Beds with Heat Production

Mohammad Banaei et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

添加到收藏夹

Article Thermodynamics

Extension of a coarse grained particle method to simulate heat transfer in fluidized beds

Liqiang Lu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Engineering, Chemical

Effect of operating pressure on particle temperature distribution in a fluidized bed with heat production

Z. Li et al.

CHEMICAL ENGINEERING SCIENCE (2017)

添加到收藏夹

Article Engineering, Chemical

Effect of superficial gas velocity on the particle temperature distribution in a fluidized bed with heat production

Z. Li et al.

CHEMICAL ENGINEERING SCIENCE (2016)

添加到收藏夹

Article Thermodynamics

3D particle-scale modeling of gas-solids flow and heat transfer in fluidized beds with an immersed tube

Hadi Wahyudi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Engineering, Environmental

Comparison of CFD-DEM heat transfer simulations with infrared/visual measurements

A. V. Patil et al.

CHEMICAL ENGINEERING JOURNAL (2015)

添加到收藏夹

Article Engineering, Chemical

Modeling 3D Bubble Heat Transfer in Gas Solid Fluidized Beds Using the CFD-DEM

A. V. Patil et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)

添加到收藏夹

Article Engineering, Environmental

Verification and validation of a coarse grain model of the DEM in a bubbling fluidized bed

Mikio Sakai et al.

CHEMICAL ENGINEERING JOURNAL (2014)

添加到收藏夹

Article Engineering, Chemical

Modeling bubble heat transfer in gas-solid fluidized beds using DEM

Amit V. Patil et al.

CHEMICAL ENGINEERING SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

Numerical study of bubble break-up in bubbly flows using a deterministic Euler-Lagrange framework

Y. M. Lau et al.

CHEMICAL ENGINEERING SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

Two-fluid modeling of three-dimensional cylindrical gas-solid fluidized beds using the kinetic theory of granular flow

Vikrant Verma et al.

CHEMICAL ENGINEERING SCIENCE (2013)

添加到收藏夹

Article Engineering, Chemical

Numerical investigations of a pseudo-2D spout fluidized bed with draft plates using a scaled discrete particle model

Vinayak S. Sutkar et al.

CHEMICAL ENGINEERING SCIENCE (2013)

添加到收藏夹

Article Engineering, Chemical

Computational Study of the Effects of Material Properties on Heat Transfer in Gas Fluidization

Qin-Fu Hou et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

添加到收藏夹

Article Engineering, Chemical

Estimation of Numerical Errors Related to Some Basic Assumptions in Discrete Particle Methods

Sofiane Benyahia et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Large-scale discrete element modeling in a fluidized bed

Mikio Sakai et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2010)

添加到收藏夹

Article Engineering, Chemical

Particle Scale Study of Heat Transfer in Packed and Bubbling Fluidized Beds

Z. Y. Zhou et al.

AICHE JOURNAL (2009)

添加到收藏夹

Article Engineering, Chemical

Large-scale discrete element modeling in pneumatic conveying

Mikio Sakai et al.

CHEMICAL ENGINEERING SCIENCE (2009)

添加到收藏夹

Article Engineering, Chemical

Drag force of intermediate Reynolds number flow past mono- and bidisperse arrays of spheres

R. Beetstra et al.

AICHE JOURNAL (2007)

添加到收藏夹

Review Engineering, Chemical

Review of discrete particle modeling of fluidized beds

N. G. Deen et al.

CHEMICAL ENGINEERING SCIENCE (2007)

添加到收藏夹

Article Engineering, Chemical

Multi-scale modeling of dispersed gas-liquid two-phase flow

NG Deen et al.

CHEMICAL ENGINEERING SCIENCE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.