4.7 Article

Efficient semi-transparent perovskite quantum dot photovoltaics enabled by asymmetric dielectric/metal/dielectric transparent electrodes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Chemistry, Physical

Device Performance of Emerging Photovoltaic Materials (Version 3)

Osbel Almora et al.

Summary: This article summarizes the best achievements in the performance of emerging photovoltaic devices in various research subjects, as reported in peer-reviewed articles since August 2021. The article provides updated graphs, tables, and analyses of performance parameters, and compares them based on the photovoltaic bandgap energy and average visible transmittance. The scope of the report is expanded to include triple junction solar cells.

ADVANCED ENERGY MATERIALS (2023)

Article Chemistry, Multidisciplinary

Homojunction Perovskite Quantum Dot Solar Cells with over 1 μm-Thick Photoactive Layer

Xuliang Zhang et al.

Summary: A perovskite quantum dot solar cell with an internal P/N homojunction demonstrated remarkable thickness tolerance and high efficiency. By introducing an organic dopant and preparing different carrier-type QD arrays, successful carrier-type transformation from n-type to p-type was achieved, leading to enhanced power conversion efficiency.

ADVANCED MATERIALS (2022)

Article Materials Science, Multidisciplinary

Recent Progress in Semitransparent Organic and Perovskite Solar Cells

Yiman Dong et al.

Summary: This review introduces the development progress of semitransparent photovoltaic (STPV) devices in terms of the selection of active layer materials, top transparent electrodes (TTEs), and strategies of enhancing performance. The challenges and future outlooks for STPVs are also discussed.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2022)

Article Energy & Fuels

Development of MoO3/Au/MoO3 Top Transparent Conducting Electrode for Organic Solar Cells on Opaque Substrates

L. Sowjanya Pali et al.

Summary: This study focuses on the integration of a MoO3/Au/MoO3 multilayered electrode with organic solar cells, demonstrating improved optical and electrical characteristics. The results show that the MoO3/Au/MoO3 electrode enhances light coupling and conductivity, leading to a significant increase in photovoltaic performance on opaque steel substrates.

ENERGY TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Balance PCE, AVT and CRI for good eye comfort semi-transparent organic photovoltaics via Ga2O3 or In2O3 electron collection layers

Yiming Bai et al.

Summary: This study proposes a method to achieve semi-transparent organic solar cells (ST-OSCs) with good visual comfort by simulation and experiment, achieving suitable transparency, power conversion efficiency, and color rendering index. The results show that ST-OSCs with Ga(2)O(3) or In2O3 electron collection layers demonstrate outstanding power-generating and chromatic parameters, offering a simple approach for achieving energy-saving skyscrapers with good visual comfort.

ORGANIC ELECTRONICS (2022)

Article Chemistry, Physical

Tailoring solvent-mediated ligand exchange for CsPbI3 perovskite quantum dot solar cells with efficiency exceeding 16.5%

Donglin Jia et al.

Summary: The ligand exchange of PQDs was mediated using 2-pentanol solvent, which effectively removed insulating ligands and improved the efficiency of PQDSC.
Article Engineering, Environmental

Single-step-fabricated perovskite quantum dot photovoltaic absorbers enabled by surface ligand manipulation

Jigeon Kim et al.

Summary: This paper demonstrates a single-step fabrication approach for conductive thick CsPbI3-PQD absorbers based on surface ligand manipulation, which shows improved power conversion efficiency in PQD solar cells. By employing a different post-treatment method and utilizing solution-phase ligand exchange PQDs, the efficiency of solar cells was significantly increased.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Materials Science, Multidisciplinary

Thin-Metal-Film-Based Transparent Conductors: Material Preparation, Optical Design, and Device Applications

Cheng Zhang et al.

Summary: Transparent conductors are essential in various optoelectronic devices, and alternative to indium tin oxide (ITO) based on thin metal films has been intensively researched due to issues with ITO. Thin metal film-based transparent conductors have seen comprehensive development in material selection, fabrication techniques, characterization methods, and diverse applications.

ADVANCED OPTICAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Intermediate-Adduct-Assisted Growth of Stable CsPbI2Br Inorganic Perovskite Films for High-Efficiency Semitransparent Solar Cells

Min Wang et al.

Summary: The Perovskite CsPbI2Br film quality is improved using an intermediate adduct (IMAT) engineering strategy, enhancing both efficiency and stability. By optimizing the electrode type and interface, the ST-SC shows a high open-circuit voltage (V-oc) exceeding 1.2 V, with power conversion efficiencies (PCEs) reaching 14.01% and 10.36% under average visible transmittance (AVT) of 31.7% and 40.9% respectively.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Chemistry, Multidisciplinary

Semi-Transparent Organic Photovoltaic Cells with Dielectric/Metal/Dielectric Top Electrode: Influence of the Metal on Their Performances

Linda Cattin et al.

Summary: By using MoO3/Ag/MoO3 as the top anode, semi-transparent organic photovoltaic cells (OPVs) achieved high transparency and low sheet resistance in the visible light range, with an efficiency only 20% lower than opaque OPVs and close to 50% transparency. However, using MoO3/Ag/Cu:Ag/ZnS as the top anode resulted in lower efficiency due to Cu diffusion causing degradation of the anode/organic material contact.

NANOMATERIALS (2021)

Article Nanoscience & Nanotechnology

α-CsPbBr3 Perovskite Quantum Dots for Application in Semitransparent Photovoltaics

Xuliang Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Thermodynamics

A strategy of hierarchical particle sizes in nanoparticle composite for enhancing solar reflection

Joseph Peoples et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Review Green & Sustainable Science & Technology

A review of graphene based transparent conducting films for use in solar photovoltaic applications

Nurul Nazli Rosli et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Chemistry, Physical

Operation Mechanism of Perovskite Quantum Dot Solar Cells Probed by Impedance Spectroscopy

Zahra Zolfaghari et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Physical

Efficient Semitransparent CsPbI3 Quantum Dots Photovoltaics Using a Graphene Electrode

Mohammad Mahdi Tavakoli et al.

SMALL METHODS (2019)

Review Chemistry, Multidisciplinary

Recent advances in semi-transparent polymer and perovskite solar cells for power generating window applications

Qifan Xue et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Thermochromic halide perovskite solar cells

Jia Lin et al.

NATURE MATERIALS (2018)

Review Chemistry, Multidisciplinary

Stability of Perovskite Solar Cells: A Prospective on the Substitution of the ACation and XAnion

Ze Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Multidisciplinary

CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability

Jia Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Multidisciplinary Sciences

Enhanced mobility CsPbI3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells

Erin M. Sanehira et al.

SCIENCE ADVANCES (2017)

Article Chemistry, Physical

Cesium Enhances Long-Term Stability of Lead Bromide Perovskite-Based Solar Cells

Michael Kulbak et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Article Materials Science, Multidisciplinary

Design of a MoOx/Au/MoOx transparent electrode for high-performance OLEDs

Myeonggi Kim et al.

ORGANIC ELECTRONICS (2016)

Article Chemistry, Physical

Ultra-thin high efficiency semitransparent perovskite solar cells

Enrico Della Gaspera et al.

NANO ENERGY (2015)

Article Chemistry, Multidisciplinary

Solar Cells Based on Inks of n-Type Colloidal Quantum Dots

Zhijun Ning et al.

ACS NANO (2014)

Article Chemistry, Multidisciplinary

High efficiency single-junction semitransparent perovskite solar cells

Cristina Roldan-Carmona et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Multidisciplinary

o-Methoxy Substituents in Spiro-OMeTAD for Efficient Inorganic-Organic Hybrid Perovskite Solar Cells

Nam Joong Jeon et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Chemistry, Multidisciplinary

Directly Deposited Quantum Dot Solids Using a Colloidally Stable Nanoparticle Ink

Armin Fischer et al.

ADVANCED MATERIALS (2013)

Article Materials Science, Multidisciplinary

Design of dielectric/metal/dielectric transparent electrodes for flexible electronics

Sungjun Kim et al.

JOURNAL OF PHOTONICS FOR ENERGY (2012)

Article Energy & Fuels

Semitransparent inverted polymer solar cells using MoO3/Ag/WO3 as highly transparent anodes

Fumin Li et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

Review Physics, Applied

Small molecular weight organic thin-film photodetectors and solar cells

P Peumans et al.

JOURNAL OF APPLIED PHYSICS (2003)

Article Materials Science, Coatings & Films

AFM observation of ITO thin films deposited on polycarbonate substrates by sputter type negative metal ion source

D Kim et al.

SURFACE & COATINGS TECHNOLOGY (2003)

Article Chemistry, Physical

Effect of surface roughness on the optical properties of multilayer polymer films

A Larena et al.

APPLIED SURFACE SCIENCE (2002)