☆ 4.7 Article

Screening metal tellurides as cathode materials for Li-Te batteries

CHEMICAL ENGINEERING JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Activating redox kinetics of polysulfides within edge-rich nitrogen doped porous interconnected carbon nanosphere

Junda Pan et al.

Summary: A nitrogen-doped micro-mesoporous interconnected carbon nanosphere, N-PCS, was designed and prepared as an electrocatalyst for lithium-sulfur batteries. The N-PCS showed a high content of edge N atom doping and a unique pore structure, which effectively bound lithium polysulfides and accelerated their reduction kinetics. As a result, the S/N-PCS exhibited excellent cycling stability with an ultra-low capacity decay rate of 0.04% per cycle and a high area specific capacity of 5.27 mAh cm-2 at a high sulfur loading of 5.49 mg cm-2.

CHEMICAL ENGINEERING SCIENCE (2023)

添加到收藏夹

Article Engineering, Chemical

Hollow Co3S4 Nanocubes Interconnected with Carbon Nanotubes as Nanoreactors to Accelerate Polysulfide Conversion for High-Performance Lithium-Sulfur Batteries

Junhao Li et al.

Summary: A conductive framework and electrocatalyst consisting of carbon nanotubes and Co3S4 hollow nanocubes were developed as the sulfur host in lithium-sulfur batteries. The hollow structure can accommodate volume changes during the charge/discharge process, while the carbon nanotubes facilitate electron transport. The Co3S4 catalyst not only accelerates the conversion of liquid lithium polysulfides to solid Li2S1/2, but also promotes the conversion of Li2S2 to Li2S. The Co3S4/CNTs composite cathode exhibits a higher initial specific capacity (1252 mAh g-1) than the CNT cathode, and maintains a specific capacity of 440 mAh g-1 after 800 cycles with a decay rate of 0.08% per cycle at 1.0C.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dilute Alloying to Implant Activation Centers in Nitride Electrocatalysts for Lithium-Sulfur Batteries

Quanbing Liu et al.

Summary: Dilute alloying is proven to be effective in enhancing the reaction kinetics and performance of metal nitride electrocatalysts for lithium-sulfur batteries. By incorporating dilute cobalt alloying in titanium nitride, the high rate capacity of Li-S batteries is increased by a factor of two and a negligible cyclic decay rate is achieved. This work sheds light on the rational design of Li-S electrocatalysts and provides insights into complex domain-catalyzed reactions in energy applications.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Engineering, Environmental

Interface engineering of Fe3Se4/FeSe heterostructures encapsulated in MXene for boosting LiPS conversion and inhibiting shuttle effect

Xiaoya Zhou et al.

Summary: In this study, a novel catalyst composed of Fe3Se4/FeSe heterojunctions encapsulated in two-dimensional MXene nanosheets was prepared. The catalyst exhibited efficient capture, adsorption, and catalytic conversion of lithium polysulfide in Lithium-sulfur batteries. The Li-S battery with the Fe3Se4/FeSe@MXene-PP separator showed high specific capacity and outstanding rate capacity, as well as good cycle stability even with high sulfur loading.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Environmental

Alleviating the self-discharge and enhancing the polysulphides conversion kinetics with LaCO3OH nanocrystals decorated hierarchical porous carbon

Yuhang Lin et al.

Summary: This work presents the fabrication of LaCO3OH nanocrystals decorated nitrogen-doped carbon nanosheet arrays (MNCS-La) as an advanced sulfur reservoir for Li-S batteries. The hierarchical porous architecture of carbon nanosheet arrays and monodispersed LaCO3OH nanocrystals inhibit the shuttle effect and self-discharge, and enhance the electrochemical conversion kinetics. The sulfur electrodes based on MNCS-La exhibit enhanced electrochemical performance.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Environmental

Synergistic enhancement of Li-S battery low-temperature cycling performance by nano-sized uniformly compounded FeCoNi and MnO nanoparticles

Xiaowan Pang et al.

Summary: This study introduces FeCoNi and MnO nanoparticles as catalysts and anchors to improve the low-temperature cycling stability of lithium-sulfur batteries. A composite cathode material FCN-MO@CNFs is synthesized by one-step in-situ pyrolysis, which exhibits excellent electrocatalytic activity and satisfactory low-temperature cycling performance.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Environmental

Breaking the linear scaling relations in MXene catalysts for efficient CO2 reduction

Ying Li et al.

Summary: The group discovered that by substituting a series of TM atoms in Mo3C2 MXene, the catalytic performance of CO2RR can be significantly improved, allowing for the selective reduction of CO2 to methane (CH4) and effectively lowering the limiting potential of the reaction.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Boron-doped graphene anode coupled with microporous activated carbon cathode for lithium-ion ultracapacitors

Udita Bhattacharjee et al.

Summary: Lithium-ion hybrid capacitors combining the advantages of both lithium-ion batteries and ultracapacitors demonstrate a balance between high energy and high power capabilities. The utilization of boron-doped graphene and activated rice husk microsporous carbon as electrode materials shows promising performance with significant energy densities and power densities. The study also analyzes the cycling performance and impedance spectra to understand the practical feasibility and reasons behind potential degradation.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Electrochemical and transport properties of Te-doped Li4Ti5O12 as anode material for lithium-ion half/full batteries

Xiao Xiao et al.

Summary: Te-doped Li4Ti5O12 prepared by the ball milling-assisted solid-state method exhibited improved ionic and electronic conductivities, leading to enhanced performance in lithium-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Monolayer and bilayer siligraphenes as high-performance anode materials for potassium ion batteries: A first principles study

Hangwei Wang et al.

Summary: This study systematically investigated the feasibility of emerging 2D SiC3 and SiC5 as anode materials for potassium ion batteries. The computational results demonstrated that SiC3 and SiC5 exhibited excellent potassium adsorption, fast charging/discharging capability, and good cycle reversibility, making them outstanding anode materials for advanced potassium ion batteries.

JOURNAL OF MOLECULAR LIQUIDS (2022)

添加到收藏夹

Article Engineering, Environmental

Synergistic Adsorption-Electrocatalysis of 2D/2D heterostructure toward high performance Li-S batteries

Yilun Ren et al.

Summary: This study developed a novel 2D/2D heterostructure as a multifunctional barrier for Li-S batteries. The modified separators effectively suppress the dissolution of polysulfides, accelerate their conversion, and enhance electron/ion transfer. The Li-S batteries with the heterostructure-modified separators exhibit excellent reversible capacity and cycling stability.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Cation-doped ZnS catalysts for polysulfide conversion in lithium-sulfur batteries

Zihan Shen et al.

Summary: By studying the relationship between polysulfide adsorption ability and catalytic activity, researchers have discovered a volcano-shaped relationship. The study distinguishes between catalytic and anchoring effects, providing insights into the role of adsorption and catalyst passivation. These findings offer a rational viewpoint for designing and tuning the activity of Li-S catalysts.

NATURE CATALYSIS (2022)

添加到收藏夹

Article Engineering, Environmental

Metal atom-doped Co3O4 nanosheets for Li-O2 battery catalyst: Study on the difference of catalytic activity

Zheng Lian et al.

Summary: In this study, a series of Co3O4 nanosheet array-supported single atom catalysts (MSACo3O4/CC) were synthesized and used as cathode catalysts for Li-O2 batteries. Experimental results show that the catalytic activity of MSACo3O4/CC doped with different metal atoms is different for Li-O2 battery. Density functional theory calculation reveals that the interaction between the doped metal atoms and the key reactants is the main factor affecting the catalytic activity.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Achieving Dendrite-free lithium Plating/Stripping from mixed Ion/ Electron-Conducting scaffold Li2S@Ni NWs-NF for stable lithium metal anodes

Jiajie Pan et al.

Summary: In this study, a mixed ion/electron conducting skeleton was designed to solve the problems of lithium metal anodes. By incorporating Li2S protective layer and Ni nanowires, the dual regulation of ions and electrons was achieved. The experimental results showed that this mixed conducting skeleton significantly improved the cycle life and rate performance of the batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Boosting sulfur catalytic kinetics by defect engineering of vanadium disulfide for high-performance lithium-sulfur batteries

Guo Liu et al.

Summary: By introducing sulfur vacancies, the D-VS2 nanosheets can effectively enhance the chemical anchoring and catalytic kinetics of LiPSs in Li-S batteries, resulting in high initial discharge specific capacity and excellent cycling stability.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Cable-like polyimide@carbon nanotubes composite as a capable anode for lithium ion batteries

Boya Liu et al.

Summary: Polyimide nanoflakes grown on carbon nanotubes via in-situ polymerization form a cable-like structure. The dispersed nanoflakes shorten lithium ion transmission distance and the carbon nanotubes promote electron transportation, leading to enhanced electrochemical performance.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Subnanometer MoP clusters confined in mesoporous carbon (CMK-3) as superior electrocatalytic sulfur hosts for high-performance lithium-sulfur batteries

Lei Wang et al.

Summary: This study presents a confined catalytic strategy to improve the sulfur utilization for high-energy Li-S batteries by embedding MoP clusters in CMK-3 as a lightweight, conductive, and catalytic cathodic host. The resulting S@cMoP-CMK-3 cathode demonstrates a high capacity, high-rate capacity, and excellent cycle stability, indicating the importance of this strategy in enhancing the performance of Li-S batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Two-dimensional cobalt telluride as a piezo-tribogenerator

Solomon Demiss Negedu et al.

Summary: This study successfully generates electricity using waste heat through the piezoelectric and triboelectric properties of 2D cobalt telluride. The 2D piezo-tribogenerator shows excellent characteristics with high voltage, fast response time, and high responsivity. Density functional theory is used to validate the experimental results.

NANOSCALE (2022)

添加到收藏夹

Article Engineering, Chemical

Suppressing lithium dendrites by coating MoS2 with different layer spacings: A multiscale simulation study

Kai Huang et al.

Summary: The study found that a smaller MoS2 layer spacing can enhance ion diffusion, and it is more difficult for lithium dendrites to grow on 2H-MoS2. Enlarged layer spacing can effectively reduce the growth of lithium dendrites, with 0.75 nm being the most suitable interlayer distance for MoS2 expansion.

CHEMICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Organic liquid electrolytes in Li-S batteries: actualities and perspectives

Yilong Lin et al.

Summary: Lithium-sulfur batteries have been extensively studied as a promising candidate for large-scale energy storage systems due to their high theoretical cathodic capacity and low cost of sulfur. However, challenges such as inferior cycle stability and low charging efficiency hinder their practical application. Researchers have focused on developing novel host materials for the sulfur cathode and protecting the lithium metal anode, but the high solubility of lithium sulfide intermediates in liquid electrolytes remains a primary issue.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

A durable lithium-tellurium battery: Effects of carbon pore structure and tellurium content

Yue Zhang et al.

Summary: In lithium-tellurium (Li-Te) batteries, it was found that carbon micropores rather than mesopores are critical for effective tellurium confinement, leading to enhanced stability and cycling performance of the battery cells. The study also revealed that the carbon host should be partially filled with tellurium up to around 60 wt% to accommodate the volume change of tellurium and achieve exceptional capacity retention.

CARBON (2021)

添加到收藏夹

Article Chemistry, Physical

Janus MoSSe/graphene heterostructures: Potential anodes for lithium-ion batteries

He Lin et al.

Summary: The study introduced two MoSSe/graphene heterostructures which not only overcame the drawbacks of MoSSe but also integrated the advantages of individual components. Through computations, it was found that the heterostructures exhibited good structural stability, high ion conductivity, and mechanical stiffness, making them potential materials for high-performance LIBs.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Capture and catalytic conversion of lithium polysulfides by metal-doped MoS2 monolayers for lithium?sulfur batteries: A computational study

Wanjiao Cui et al.

Summary: In this study, metal-doped MoS2 monolayers were investigated as effective anchoring materials for lithium sulfur batteries. Substitution of S atoms with metal dopants significantly improved the binding strength of Li2Sn species on the material. The metal-doped MoS2 monolayers also showed good catalytic activity for Li2S formation and decomposition during discharge and charge processes.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2021)

添加到收藏夹

Review Energy & Fuels

Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure

Fabian Duffner et al.

Summary: This review highlights the current production status of representative PLIBs and the advantages of lithium-ion batteries as advanced electrochemical energy storage technology. It also discusses the research and manufacturing processes of post-lithium technologies.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Flexible borophosphene monolayer: A potential Dirac anode for high-performance non-lithium ion batteries

He Lin et al.

Summary: Using first principles calculations, the feasibility of borophosphene as a Dirac anode of NLIBs has been evaluated. Results show that borophosphene exhibits excellent conductivity, high adsorption energy, and high specific capacity, making it a potential anode for advanced sodium, potassium, and calcium-ion batteries.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

MoTe2: Semiconductor or Semimetal?

Ya Deng et al.

Summary: Transition metal tellurides (TMTs) have attracted intense interest due to their diverse phase topologies, exhibiting a wide range of physical properties such as acting as topological insulators, semiconductors, Weyl semimetals, and superconductors. Among the TMT families, MoTe2 stands out as a representative material with its Janus nature and rich phases. This Perspective introduces the phase structures and synthesis strategies of MoTe2, focusing on recent advances and emerging quantum states of Janus MoTe2, along with insights into the opportunities and challenges in device design and applications associated with MoTe2.

ACS NANO (2021)

添加到收藏夹

Article Engineering, Environmental

Yolk-shell porous carbon spheres@CoSe2 nanosheets as multilayer defenses system of polysulfide for advanced Li-S batteries

Bingshu Guo et al.

Summary: By synthesizing yolk-shell porous carbon spheres loaded with CoSe2 nanosheets, the shuttle effect in lithium-sulfur batteries can be effectively suppressed, improving their cycling stability and capacity retention.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Electrochemistry

The role of carbon pore structure in tellurium/carbon cathodes for lithium-tellurium batteries

Yue Zhang et al.

Summary: Utilizing lignin to develop porous carbon as a host for tellurium can improve the performance and cycle life of tellurium electrodes, indicating lignin as a sustainable precursor for developing a unique carbon pore structure in battery applications.

ELECTROCHIMICA ACTA (2021)

添加到收藏夹

Article Chemistry, Physical

Realizing Solid-Phase Reaction in Li-S Batteries via Localized High-Concentration Carbonate Electrolyte

Mengxue He et al.

Summary: A novel electrolyte has been proposed in this study to effectively eliminate the shuttle effect in lithium-sulfur batteries, resulting in stable cycling performance. By utilizing a solid-phase reaction route and forming a compact cathode electrolyte interface film, the developed strategy shows promise for future development of Li-S batteries based on solid-phase conversion.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Implications of in situ chalcogen substitutions in polysulfides for rechargeable batteries

Sanjay Nanda et al.

Summary: The study compares the impact of selenium and tellurium substitutions in polysulfide chains on the performance of lithium-sulfur batteries, finding that selenium enhances cathode utilization through catalyzing reactions, while tellurium improves lithium cycling efficiency.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polymorphic Spin, Charge, and Lattice Waves in Vanadium Ditelluride

Dongyeun Won et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Semiconductive Nature of Lead-Based Metal-Organic Frameworks with Three-Dimensionally Extended Sulfur Secondary Building Units

Yoshinobu Kamakura et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Review Chemistry, Physical

Strategies toward High-Loading Lithium-Sulfur Battery

Yin Hu et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Janus Conductive/Insulating Microporous Ion-Sieving Membranes for Stable Li-S Batteries

Borui Liu et al.

ACS NANO (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Following the microscopic pathway to adsorption through chemisorption and physisorption wells

Dmitriy Borodin et al.

SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Metallic VS2/blue phosphorene heterostructures as promising anode materials for high-performance lithium ion batteries: A first principles study

He Lin et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Review Chemistry, Physical

Metal-Tellurium Batteries: A Rising Energy Storage System

Ze Chen et al.

SMALL STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Ceramics

Functionalized titanium nitride-based MXenes as promising host materials for lithium-sulfur batteries: A first principles study

He Lin et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Environmental

Cobalt-boron nanoparticles anchored on graphene as anode of lithium ion batteries

Dong Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Chemistry, Physical

Blocking of the 1T-to-2H phase transformation of chemically exfoliated transition metal disulfides by using a lattice lock

Sieun Chae et al.

NANO ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Observation of the Kondo Effect in Multilayer Single-Crystalline VTe2 Nanoplates

Hongtao Liu et al.

NANO LETTERS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nitrogen-Doped Carbon as a Host for Tellurium for High-Rate Li-Te and Na-Te Batteries

Yi Li et al.

CHEMSUSCHEM (2019)

添加到收藏夹

Article Engineering, Environmental

MnO2 nanosheets grown on the internal/external surface of N-doped hollow porous carbon nanospheres as the sulfur host of advanced lithium-sulfur batteries

Manfang Chen et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Engineering, Environmental

Sulfur-embedded porous carbon nanofiber composites for high stability lithium-sulfur batteries

Kang Weimin et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Heterogeneous Fe-3 single-cluster catalyst for ammonia synthesis via an associative mechanism

Jin-Cheng Liu et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Utilizing a metal as a sulfur host for high performance Li-S batteries

Xiao-Chen Liu et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Manipulating the Redox Kinetics of Li-S Chemistry by Tellurium Doping for Improved Li-S Batteries

Kangli Xu et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Hot lithium-oxygen batteries charge ahead

Shuting Feng et al.

SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Chemical Vapor Deposition Growth of Single Crystalline CoTe2 Nanosheets with Tunable Thickness and Electronic Properties

Huifang Ma et al.

CHEMISTRY OF MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthetic Control of Two-Dimensional NiTe2 Single Crystals with Highly Uniform Thickness Distributions

Bei Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Crystalline structure, electronic and lattice-dynamics properties of NbTe2

Aaron Hernan Barajas-Aguilar et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Catalytic oxidation of Li2S on the surface of metal sulfides for Li-S batteries

Guangmin Zhou et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Emergence of charge density waves and a pseudogap in single-layer TiTe2

P. Chen et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lithium-ion batteries: Stress relief for silicon

Alison Stoddart

Nature Reviews Materials (2017)

添加到收藏夹

Article Electrochemistry

Rib-like hierarchical porous carbon as reservoir for long-life and high-rate Li-Te batteries

Yi Li et al.

ELECTROCHIMICA ACTA (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tellurium-Impregnated Porous Cobalt-Doped Carbon Polyhedra as Superior Cathodes for Lithium-Tellurium Batteries

Jiarui He et al.

ACS NANO (2017)

添加到收藏夹

Article Chemistry, Physical

Lithium ion adsorption and diffusion on black phosphorene nanotube: A first-principles study

Jin Cao et al.

APPLIED SURFACE SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional Hierarchical Reduced Graphene Oxide/Tellurium Nanowires: A High-Performance Freestanding Cathode for Li-Te Batteries

Jiarui He et al.

ACS NANO (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elastic Carbon Nanotube Aerogel Meets Tellurium Nanowires: A Binder- and Collector-Free Electrode for Li-Te Batteries

Jie Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

A core-shell electrode for dynamically and statically stable Li-S battery chemistry

Sheng-Heng Chung et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Electrochemistry

A lithium-tellurium rechargeable battery with exceptional cycling stability

Toshinari Koketsu et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Band structure engineering in organic semiconductors

Martin Schwarze et al.

SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Capacity Fade Analysis of Sulfur Cathodes in Lithium-Sulfur Batteries

Jianhua Yan et al.

ADVANCED SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

From the Sabatier principle to a predictive theory of transition-metal heterogeneous catalysis

Andrew J. Medford et al.

JOURNAL OF CATALYSIS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase-engineered transition-metal dichalcogenides for energy and electronics

Manish Chhowalla et al.

MRS BULLETIN (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sulfur-Functionalized Mesoporous Carbons as Sulfur Hosts in Li-S Batteries: Increasing the Affinity of Polysulfide Intermediates to Enhance Performance

Kimberly A. See et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Chemistry, Physical

Lithium-tellurium batteries based on tellurium/porous carbon composite

Ying Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Amphiphilic Surface Modification of Hollow Carbon Nanofibers for Improved Cycle Life of Lithium Sulfur Batteries

Guangyuan Zheng et al.

NANO LETTERS (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Van der Waals heterostructures

A. K. Geim et al.

NATURE (2013)

添加到收藏夹

Review Nanoscience & Nanotechnology

Electronics and optoelectronics of two-dimensional transition metal dichalcogenides

Qing Hua Wang et al.

NATURE NANOTECHNOLOGY (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of the Damping Function in Dispersion Corrected Density Functional Theory

Stefan Grimme et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2011)

添加到收藏夹

Review Chemistry, Multidisciplinary

Towards the computational design of solid catalysts

J. K. Norskov et al.

NATURE CHEMISTRY (2009)

添加到收藏夹

Article Chemistry, Physical

Cluster and periodic DFT calculations: The adsorption of atomic nitrogen on M(111) (M = Cu, Ag, An) surfaces

GC Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.