☆ 4.7 Article

Novel design and fabrication of form-stable cellulose nanofiber-based phase change composites via click chemistry, coordination reaction, and solvent exchange

CHEMICAL ENGINEERING JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

High efficiency electro- and photo-thermal conversion cellulose nanofiber-based phase change materials for thermal management

Yu Liu et al.

Summary: Novel phase change materials composed of polyethylene glycol (PEG), cellulose nanofibers (CNFs) and carbon nanotubes (CNTs) were developed. The materials exhibit high latent heat, low heat loss, and excellent photo-thermal conversion and electro-thermal conversion properties, showing great potential as thermal management materials.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

添加到收藏夹

Article Engineering, Environmental

Preparation of alumina/silica/exfoliated graphite nanoplatelets composite aerogels and its application as supporting material for erythritol based form-stable phase change materials

Yu-Hao Ning et al.

Summary: Alumina-silica (Al-Si) and Al-Si/exfoliated graphite nanoplatelets (xGnPs) composite aerogels were prepared using an epoxide method followed by ambient pressure drying and heat treatment. The addition of xGnPs in Al-Si aerogels resulted in composite aerogels with high specific surface area and low volume shrinkage. The synthesized aerogels were then used to prepare form-stable phase change materials (FSPCMs) by vacuum infiltrating erythritol (ET). The FSPCMs exhibited enhanced thermal conductivity and light-to-thermal conversion efficiency, as well as good long-term thermal reliability.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultra-Stable Phase Change Coatings by Self-Cross-Linkable Reactive Poly(ethylene glycol) and MWCNTs

Junshuo Cui et al.

Summary: PCM coatings based on reactive poly(ethylene glycol) have been developed for direct thermal energy exchange and storage, showing significant solid-solid phase transition properties and high energy storage densities. Addition of multi-walled carbon nanotubes into the coatings enhances high-temperature form stability and rapid thermal exchange properties, forming a cross-linked network between RPEG and MWCNTs. Thermal regulation clothes prepared by spray coating method exhibit good washing durability without performance deterioration after three washes.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Phase change material microcapsules with melamine resin shell via cellulose nanocrystal stabilized Pickering emulsion in-situ polymerization

Zhe Zhang et al.

Summary: PCM microcapsules with MF shell were successfully prepared with CNCs as emulsifiers, achieving stable encapsulation of PCMs and enhanced heat conduction efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Click and Bioorthogonal Chemistry: The Future of Active Targeting of Nanoparticles for Nanomedicines?

Ludivine Taiariol et al.

Summary: Click and bioorthogonal reactions are high-performance chemical reactions that have gained considerable attention in the biomedical field for the engineering of nanomedicines. This review compiles articles from 2014 to the present to highlight the application and main strategies of click chemistry and nanoparticles in biomedical applications.

CHEMICAL REVIEWS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Cellulose nanofiber grafting and aluminum nitride deposition on the surface of expanded graphite to improve the thermal conductivity and mechanical properties of phase change material composites

Wondu Lee et al.

Summary: In this study, novel thermally conductive PCM composites were prepared by grafting cellulose nanofibers and covering with aluminum nitride, exhibiting high through-plane thermal conductivity and latent heat. These composites enable efficient thermal management and have high tensile strength.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Environmental

Cellulose-derived solid-solid phase change thermal energy storage membrane with switchable optical transparency

Zhen Lang et al.

Summary: Switchable optical transparency is achieved in shape-stabilized phase change membranes (CUE-AAs) through a copolymerization-induced strategy. These membranes exhibit excellent thermal energy storage performance, thermo-reversible optical transparency, and enhanced light-to-thermal conversion effect with the addition of n-alkanes and antimony-doped tin oxide nano-particles. Their diverse properties make them suitable for applications in intelligent optical devices and solar energy storage devices.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

One-step in-situ green synthesis of cellulose nanocrystal aerogel based shape stable phase change material

Miao Cheng et al.

Summary: An innovative one-step in-situ synthesis method was developed to prepare shape stable phase change materials by combining polyethylene glycol with chemically cross-linked cellulose nanocrystal aerogel. The resulting composite exhibited high phase change enthalpy, excellent cyclic reversibility, improved thermal conductivity, and mechanical properties. This sustainable approach offers great opportunities for applications in thermal energy storage systems.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Manufacturing

In situ preparation of light-driven cellulose-Mxene aerogels based composite phase change materials with simultaneously enhanced light-to-heat conversion, heat transfer and heat storage

Heng Wang et al.

Summary: In this study, polyethylene glycol/MXene-cellulose aerogels fs-CPCMs with enhanced light-to-heat conversion, heat transfer, and storage were prepared using freezing casting and in situ encapsulation. The light-to-heat conversion efficiency of PMC fs-CPCMs reached 91.6% due to the presence of MXene. Dispersed MXene improved the heat transfer, and in situ encapsulation prevented reduction in latent heat.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Environmental

High-performance cellulose nanofiber-derived composite films for efficient thermal management of flexible electronic devices

Bo Zhang et al.

Summary: Heat dissipation materials are crucial for thermal management in high-power-density flexible electronic devices. Conventional materials often fail to meet the required thermal conductivity and mechanical properties simultaneously, and enhancing their performance usually involves complex procedures. In this study, a simple and robust synthesis method was developed to create a high-performance thermal management material by processing natural cellulose nanofibers and graphite nanoplatelets.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Composites

Dual-functional phase change composite based on copper plated cellulose aerogel

Lunyu Zhao et al.

Summary: Copper plated cellulose aerogel (CPCA) prepared by electroless deposition method can encapsulate polyethylene glycol (PEG) to form composite phase change materials (PCM), which exhibit enhanced thermal conductivity, high PCM loading capacity and extraordinary shape-stability. Moreover, the composite PCM also possesses excellent electromagnetic interference (EMI) shielding property.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Energy & Fuels

D-mannitol-based eutectic composite phase change materials with high thermal conductivity and solar-thermal conversion

Yu Bai et al.

Summary: This article studied a phase change material suitable for medium temperature heat storage and prepared shape-stable composite phase change material by adding thermally conductive support network and melting point modifier. The obtained material has suitable phase transition temperature and high thermal conductivity, which can be widely used in energy storage and photothermal conversion.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Preparation and application of composite phase change materials stabilized by cellulose nanofibril-based foams for thermal energy storage

Zhenghui Shen et al.

Summary: In this study, cellulose nanofibril-based foams were used as scaffolds for polyethylene glycol and paraffin wax to prevent leakage and improve heat transfer performance. Multiwalled carbon nanotubes were incorporated to enhance the thermal conductivity. The prepared foams had high porosity and low density, resulting in high PCM loading levels and negligible leakage. The addition of CNTs improved the heat transfer performance and thermal stability of the composite PCMs. Novel PCM sandwich structures based on these composite PCMs showed promising potential for solar energy harvesting and utilization.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

添加到收藏夹

Article Polymer Science

Polyurethane template-based erythritol/graphite foam composite phase change materials with enhanced thermal conductivity and solar-thermal energy conversion efficiency

Kunyin Wang et al.

Summary: This paper reports the fabrication of a composite phase change material (PCMs) for efficient solar-thermal energy conversion. The material has a low supercooling degree, good leakage resistance, and high thermal conductivity, which can enhance the solar energy storage performance.

POLYMER (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent Progress in High-Strength and Robust Regenerated Cellulose Materials

Hu Tu et al.

Summary: Cellulose, as the most abundant sustainable polymer, has the potential to act as an ideal substitute for plastics due to its low cost, wide availability, and biodegradability. Recent achievements in developing cellulose green solvents and regenerated cellulose materials with high strength through bottom-up approaches have shown potential applications in textiles, biomedicine, energy storage, packaging, etc. Importantly, these cellulose-based materials can be biodegraded in soil and oceans, reducing environmental pollution.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Applied

Lightweight, strong, and form-stable cellulose nanofibrils phase change aerogel with high latent heat

Mingyao Song et al.

Summary: By utilizing Pickering emulsion templating technique, a strong and form-stable CNF/PCM composite aerogel with a latent heat of 173.59 J.g(-1) was successfully fabricated. The composite aerogel shows good stability at 80 degrees C, relatively low thermal conductivity, and no leakage after multiple heating/cooling cycles.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Article Engineering, Environmental

Cellulose based composite foams and aerogels for advanced energy storage devices

Huayu Liu et al.

Summary: Cellulose foams and aerogels are versatile scaffolds for various applications due to their low density and biodegradability, and they have attracted extensive attention in the research of sustainable electrode materials for energy storage devices.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

Bio-based flexible phase change composite film with high thermal conductivity for thermal energy storage

Yufang He et al.

Summary: A shape-stabilized and flexible phase change film based on PEG was prepared in this study, with improved thermal conductivity by the co-operation of CNF and EG, and enhanced by the addition of BN. The film demonstrated high thermal conductivity and stable phase change enthalpy, making it suitable for thermal management and energy storage in modern electronic devices.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Energy & Fuels

Effect of adding alumina nanoparticle in D-Mannitol for reversible solar thermoelectric power generation: An experimental study

Krishnadass Karthick et al.

Summary: Solar thermoelectric power generation using Alumina Nano-Enhanced Phase Change Material and storing rejected heat in D-Mannitol helps in achieving continuous power output. Experimental results suggest that a composition of 99% D-Mannitol + 1% Alumina nanoparticle is optimal for various heat inputs and cooling methods, resulting in significantly higher TEG electrical power outputs compared to natural cooling methods.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

添加到收藏夹

Article Chemistry, Physical

An intrinsically flexible phase change film for wearable thermal managements

Yan Kou et al.

Summary: This study introduces an intrinsically flexible PCM film with solid-solid phase transition performance and exceptional mechanical flexibility, suitable for wearable thermal management. The PCM film displays adjustable phase transition enthalpy and temperature, long-term cycling stability up to 1000 cycles, along with remarkable shape tailorability and foldability. When integrated into wearable devices with a flexible graphene film as a thermal source, the flexible PCM film exhibits superior temperature control behaviors and excellent electro-thermal and photo-thermal energy conversion performance, showing great potential for next-generation flexible thermal management electronics.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Development of Renewable Biomass-Derived Carbonaceous Aerogel/Mannitol Phase-Change Composites for High Thermal-Energy-Release Efficiency and Shape Stabilization

Huan Liu et al.

Summary: This study successfully developed phase-change composites consisting of biomass-derived carbonaceous aerogel (BDCA) and mannitol, which exhibit high thermal energy density and energy-release efficiency. The composites effectively reduce supercooling, improve thermal conductivity, and enhance thermal stability.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cellulose Nanofibrils Endow Phase-Change Polyethylene Glycol with Form Control and Solid-to-gel Transition for Thermal Energy Storage

Maryam R. Yazdani et al.

Summary: Green energy-storage materials, such as the demonstrated form-stable phase-change nanohybrid (PCN), enable the sustainable use of renewable energy and waste heat by overcoming issues typical of phase-change materials. The PCN with solid-to-gel transition advantage shows high repeatability in latent heat storage and outperforms commercial insulation materials in thermal regulation and light-to-heat conversion, offering prospects for smart-energy buildings and thermal energy management in waste heat-generating electronics.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Developing fibrillated cellulose as a sustainable technological material

Tian Li et al.

Summary: Fibrillated cellulose, derived from renewable resources, has unique technological appeal and sustainability potential. Research demonstrates its wide applications in material fabrication, but challenges remain to be overcome.

NATURE (2021)

添加到收藏夹

Article Energy & Fuels

Construction of high thermal conductivity MOFs composite phase change materials with reinforced light-to-thermal conversion

Tao Hu et al.

Summary: A porous structure of expanded graphite modified Ni-MOF was synthesized by hydrothermal synthesis to enhance the light-to-thermal conversion properties of composite phase change materials, showing improved thermal conductivity and thermal cycling performance.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

添加到收藏夹

Article Chemistry, Physical

Flexible phase change materials for thermal energy storage

Jinming Shi et al.

Summary: This article reviews the development and applications of flexible phase change materials (PCMs), and discusses their potential in various smart applications as well as the challenges associated with their development.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanocellulose-Based Functional Materials: From Chiral Photonics to Soft Actuator and Energy Storage

Pengfei Lv et al.

Summary: Nanocellulose has attracted extensive research attention due to its renewable, carbon-neutral nature, superior biocompatibility, tailorable surface chemistry, and optical and mechanical properties. Recent advancements in nanocellulose-derived functional materials and their applications in areas such as chiral photonics, soft actuators, energy storage, and biomedical science have been highlighted in this review. Discussion on the design and synthesis strategies, unique properties, underlying mechanisms, and potential applications of nanocellulose-based functional materials provides insights for the rapid development of interdisciplinary fields.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Anisotropy-functionalized cellulose-based phase change materials with reinforced solar-thermal energy conversion and storage capacity

Yaqiong Li et al.

Summary: By utilizing porous cellulose nanofibril (CNF)/silver nanowire (AgNW) hybrid supporting materials and directional freeze-drying, as well as encapsulating phase change materials through vacuum impregnation, this study successfully improved the thermal conductivity of composite PCMs and obtained thermally stable materials for solar energy harvesting.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Environmental

Flexible graphene aerogel-based phase change film for solar-thermal energy conversion and storage in personal thermal management applications

Keyan Sun et al.

Summary: The study successfully developed a novel flexible graphene aerogel based composite phase change film with excellent thermal performance, long-term cycle stability, and strong solar energy conversion ability. This phase change film can be easily attached to a human model to demonstrate its advanced wearable thermal management performance.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Energy & Fuels

3D reduced graphene oxide aerogel supported TiO2-x for shape-stable phase change composites with high photothermal efficiency and thermal conductivity

Shaobo Xi et al.

Summary: Photothermal conversion, thermal energy transportation, and storage are crucial in solar energy utilization. Efforts to achieve integration of high photothermal conversion, thermal conductivity, and energy storage for phase change materials (PCMs) are ongoing. Reduced graphene oxide (RGO) aerogel, in combination with oxygen-deficient TiO2, shows promising performance in enhancing optical properties and thermal conductivity for absorption solar energy.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Spider Web-Inspired Graphene Skeleton-Based High Thermal Conductivity Phase Change Nanocomposites for Battery Thermal Management

Ying Lin et al.

Summary: This study introduces a new strategy for fabricating highly thermally conductive phase change composites by constructing a spider web-like structured graphene skeleton in paraffin wax, significantly enhancing the material's thermal conductivity. The results demonstrate that the composite exhibits remarkably high thermal conductivity enhancements at low filler loading, showing promising applications in battery thermal management.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Form-stable phase change composites: Preparation, performance, and applications for thermal energy conversion, storage and management

M. Q. Wu et al.

Summary: This comprehensive review focuses on the state-of-the-art and critical issues of advanced form-stable phase change composites (PCCs), including their preparation, thermal performance, and applications. Different preparation methods and thermal performances of metal, carbon, and ceramic-based PCCs are analyzed and compared systematically, while also summarizing the versatile applications of PCCs in energy harvesting, thermal storage, and thermal management. Future outlooks and prospects associated with the development of PCCs for high energy density and power density are highlighted.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Light-Triggered Click Chemistry

Gangam Srikanth Kumar et al.

Summary: The merger of click chemistry with discrete photochemical processes has given rise to a new class of reactions known as photoclick chemistry, allowing for rapid and precise synthesis of organic structures under mild conditions. Photoclick chemistry provides unparalleled control over reactive intermediate generation, making it indispensable in spatially addressable applications such as biomolecular labeling and polymer conjugation. Particularly popular are photoclick reactions based on 1,3-dipolar cycloadditions and Diels-Alder reactions due to their excellent reaction kinetics, selectivity, and biocompatibility.

CHEMICAL REVIEWS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Form-stable phase change composites based on nanofibrillated cellulose/polydopamine hybrid aerogels with extremely high energy storage density and improved photothermal conversion efficiency

Yunlong Tan et al.

Summary: The study has successfully synthesized novel form-stable phase change materials with high phase change enthalpy and superior photothermal conversion efficiency, showing promising characteristics for solar energy utilization applications.

RSC ADVANCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Alkylated Nanofibrillated Cellulose/Carbon Nanotubes Aerogels Supported Form-Stable Phase Change Composites with Improved n-Alkanes Loading Capacity and Thermal Conductivity

Xiaosheng Du et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Engineering, Environmental

Fatty amines/graphene sponge form-stable phase change material composites with exceptionally high loading rates and energy density for thermal energy storage

Tao Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Materials Science, Paper & Wood

Poly(ethylene glycol)-grafted nanofibrillated cellulose/graphene hybrid aerogels supported phase change composites with superior energy storage capacity and solar-thermal conversion efficiency

Xiaosheng Du et al.

CELLULOSE (2020)

添加到收藏夹

Article Engineering, Environmental

Tuning surface functionality of standard biochars and the resulting uplift capacity of loading/energy storage for organic phase change materials

Dimberu G. Atinafu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Engineering, Environmental

Facile fabrication of shape-stabilized polyethylene glycol/cellulose nanocrystal phase change materials based on thiol-ene click chemistry and solvent exchange

Ling Zhou et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Engineering, Environmental

Mechanically flexible, waterproof, breathable cellulose/polypyrrole/polyurethane composite aerogels as wearable heaters for personal thermal management

Yating Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Waterproof Phase Change Material with a Facilely Incorporated Cellulose Nanocrystal/Poly(N-isopropylacrylamide) Network for All-Weather Outdoor Thermal Energy Storage

Ling Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Tuning the flexibility and thermal storage capacity of solid-solid phase change materials towards wearable applications

Jinming Shi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Engineering, Environmental

A shape-stable phase change composite prepared from cellulose nanofiber/polypyrrole/polyethylene glycol for electric-thermal energy conversion and storage

Luying Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

High Phase Change Enthalpy Enabled by Nanocellulose Enhanced Shape Stable Boron Nitride Aerogel

Liqiang Wan et al.

ACS APPLIED POLYMER MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Flame-retardant and form-stable phase change composites based on black phosphorus nanosheets/cellulose nanofiber aerogels with extremely high energy storage density and superior solar-thermal conversion efficiency

Xiaosheng Du et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Physical

Thermal conductivity enhancement on phase change materials for thermal energy storage: A review

Shaofei Wu et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Photo- and electro-responsive phase change materials based on highly anisotropic microcrystalline cellulose/graphene nanoplatelet structure

Xiao Wei et al.

APPLIED ENERGY (2019)

添加到收藏夹

Review Energy & Fuels

Supercooling of phase-change materials and the techniques used to mitigate the phenomenon

Md. Hasan Zahir et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Ambient pressure dried flexible silica aerogel for construction of monolithic shape-stabilized phase change materials

Hongyi Gao et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

添加到收藏夹

Review Engineering, Environmental

Shape-stabilized phase change materials based on porous supports for thermal energy storage applications

Xiubing Huang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Magnetically-accelerated large-capacity solar-thermal energy storage within high-temperature phase-change materials

Peng Tao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Integration of Pore Confinement and Hydrogen-Bond Influence on the Crystallization Behavior of C18 PCMs in Mesoporous Silica for Form-Stable Phase Change Materials

Tingting Qian et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanoencapsulation of phase change materials for advanced thermal energy storage systems

E. M. Shchukina et al.

CHEMICAL SOCIETY REVIEWS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanoconfined phase change materials for thermal energy applications

Waseem Aftab et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Alkylated Meso-Macroporous Metal-Organic Framework Hollow Tubes as Nanocontainers of Octadecane for Energy Storage and Thermal Regulation

Jia Tang et al.

SMALL (2018)

添加到收藏夹

Review Chemistry, Physical

Nanoconfinement effects on thermal properties of nanoporous shape-stabilized composite PCMs: A review

Hongyi Gao et al.

NANO ENERGY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Dynamic tuning of optical absorbers for accelerated solar-thermal energy storage

Zhongyong Wang et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Review Energy & Fuels

Thermal energy storage for low and medium temperature applications using phase change materials - A review

Jose Pereira da Cunha et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Surface functionalization engineering driven crystallization behavior of polyethylene glycol confined in mesoporous silica for shape-stabilized phase change materials

Jingjing Wang et al.

NANO ENERGY (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Emerging Applications of Phase- Change Materials ( PCMs): Teaching an Old Dog New Tricks

Dong Choon Hyun et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Emerging challenges and materials for thermal management of electronics

Arden L. Moore et al.

MATERIALS TODAY (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Phase change materials for thermal energy storage

Kinga Pielichowska et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Energy & Fuels

Thermal behaviour of D-mannitol when used as PCM: Comparison of results obtained by DSC and in a thermal energy storage unit at pilot plant scale

Antoni Gil et al.

APPLIED ENERGY (2013)

添加到收藏夹

Review Multidisciplinary Sciences

Opportunities and challenges for a sustainable energy future

Steven Chu et al.

NATURE (2012)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Searching for a Better Thermal Battery

Ilan Gur et al.

SCIENCE (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.