4.7 Article

A partially Fe-substituted perovskite electrode for enhancing Zn-CO2 batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Chemistry, Multidisciplinary

Nanostructure Engineering of Sn-Based Catalysts for Efficient Electrochemical CO2 Reduction

Tiyao Ren et al.

Summary: This review systematically summarizes the nanostructure engineering of Sn-based catalysts for efficient electrochemical CO2 reduction (ECO2R). The influence of nanostructure engineering on the performance of Sn-based catalysts and the challenges and opportunities in ECO2R are discussed.
Article Chemistry, Physical

Efficient CO2 utilization and sustainable energy conversion via aqueous Zn-CO2 batteries

Sukhjot Kaur et al.

Summary: The researchers have developed a tubular-shaped nitrogen-boron-carbon catalyst (C-BN@600) derived from an ionic liquid and metal-organic framework composite, which was used as the cathode catalyst in a rechargeable zinc-carbon dioxide battery. The C-BN@600 catalyst exhibited excellent activity for electrochemical CO2 reduction to methanol with a Faradaic efficiency of 74% and a yield rate of 2665 μg h-1 mg-cat.1. The battery continuously consumes CO2 and electrochemically converts it to methanol during discharge, while simultaneously generating electrical energy, demonstrating a high energy density of 330 Wh kg-1 and a power density of 5.42 mW cm-2. It maintained stability for more than 12 days (>300 h, 800 cycles) at 1 mA cm-2, offering a dual-purpose platform for CO2 reduction and energy storage.

NANO ENERGY (2023)

Article Engineering, Environmental

Asymmetric coordinated single-atom Pd sites for high performance CO2 electroreduction and Zn-CO2 battery

Jiani Li et al.

Summary: Single-atom Pd catalysts with asymmetric coordination environments have been developed and anchored on optimized oxidized mesoporous carbon. The catalyst exhibits high selectivity for CO production and high Faradaic efficiency. Furthermore, the catalyst-based gas diffusion layer shows excellent current density and long-term stability. A rechargeable Zn-CO2 battery is constructed with the optimal gas diffusion electrode, achieving a high power density.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Multidisciplinary Sciences

Accelerating electrochemical CO2 reduction to multi-carbon products via asymmetric intermediate binding at confined nanointerfaces

Jin Zhang et al.

Summary: In this study, the authors demonstrate that asymmetric CO binding at confined nanointerfaces can enhance CO2 electroreduction to multi-carbon products. Through alloying strategies, neighbouring binary sites enable improved CO2 utilization and C-C coupling efficiency in acid conditions. These findings offer a potential approach for long-term storage of renewable electricity in valuable multi-carbon chemicals.

NATURE COMMUNICATIONS (2023)

Article Chemistry, Multidisciplinary

Cu dopant triggered Fe-N-C catalysts toward high efficiency electroreduction of CO2 to CO

Shulin Zhao et al.

Summary: Fe/Cu-N-C catalyst with curled edges flaky morphology and two kinds of Fe-containing sites is prepared by introducing copper source as a promoter into the mixture of iron source, carbon source, followed by pyrolysis. The catalyst exhibits excellent CO2RR performance with above 90% CO Faradaic efficiency (FECO).

JOURNAL OF CO2 UTILIZATION (2023)

Article Chemistry, Multidisciplinary

Boosting Industrial-Level CO2 Electroreduction of N-Doped Carbon Nanofibers with Confined Tin-Nitrogen Active Sites via Accelerating Proton Transport Kinetics

Xiangzhao Hu et al.

Summary: This study develops a porous N-doped carbon nanofiber confined with tin-nitrogen sites (Sn/NCNFs) catalyst, which exhibits outstanding catalytic activity and industrial-level current density for CO2 electroreduction. The catalyst has great significance for potential applications in CO2ER.

ADVANCED FUNCTIONAL MATERIALS (2023)

Article Thermodynamics

Enhancing Zn-CO2 battery with a facile Pd doped perovskite cathode for efficient CO2 to CO conversion

Heping Xie et al.

Summary: Using aqueous Zn-CO2 batteries with an efficient perovskite cathode, Pd-doped La2CuO4, enables effective CO2 reduction and storage, providing a promising alternative to traditional energy-intensive methods. The doping of Pd enhances the CO2 reduction reaction, resulting in increased current density and Faraday efficiency. The findings highlight the potential for perovskite catalysts in Zn-CO2 batteries and the effectiveness of Pd doping in improving battery performance.

ENERGY (2023)

Article Chemistry, Applied

Boosting electrocatalytic CO2 reduction to formate via carbon nanofiber encapsulated bismuth nanoparticles with ultrahigh mass activity

Yan Kong et al.

Summary: In this study, Bi/CNFs-900 catalyst was prepared using electrospinning techniques, and it demonstrated excellent performance and stability in CO2 electro-reduction, producing formate with high efficiency and current density.

CHINESE JOURNAL OF CATALYSIS (2023)

Article Chemistry, Physical

In operando-formed interface between silver and perovskite oxide for efficient electroreduction of carbon dioxide to carbon monoxide

Xinhao Wu et al.

Summary: In this study, an efficient electrocatalyst LSA0.05M for electrochemical carbon dioxide reduction (ECR) to carbon monoxide (CO) is reported. The catalyst demonstrates high Faradaic efficiency, mass activity, and stability. The structure reconstruction of LSA0.05M during ECR leads to the formation of an interface between the perovskite and the evolved silver phase.

CARBON ENERGY (2023)

Article Engineering, Environmental

Hollow yolk-shell nanoboxes assembled by Fe-doped Mn3O4 nanosheets for high-efficiency electrocatalytic oxygen reduction in Zn-Air battery

Tongfei Li et al.

Summary: Efficient and cost-effective Fe-doped Mn3O4 hollow yolk-shell nanoboxes (Fe-Mn3O4 HYSNBs) were synthesized using KMn[Fe(CN)(6)] prussian blue analogs as precursors. These nanoboxes exhibited excellent catalytic activity and stability towards oxygen reduction reaction (ORR) in alkaline solution, as well as high power density and specific capacity as an air-cathode in Zn-Air batteries, showcasing great potential for practical applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Coordination environment engineering to boost electrocatalytic CO2 reduction performance by introducing boron into single-Fe-atomic catalyst

Shuai Liu et al.

Summary: In this study, Fe-SA/BNC material was successfully fabricated and exhibited excellent CO2 reduction reaction activity, achieving remarkable current density and Faradaic efficiency through MEA. Density functional theory (DFT) calculations revealed the positive effect of introducing B on the desorption of *CO. Furthermore, the assembled Zn-CO2 battery demonstrated outstanding peak power density and stability for CO production.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Electron accumulation enables Bi efficient CO2 reduction for formate production to boost clean Zn-CO2 batteries

Yuchao Wang et al.

Summary: This study focused on an electrocatalytic CO2 reduction method using Bi nanoparticles embedded in carbon nanosheets to achieve high-selectivity formate production, which showed promising results in Zn-CO2 batteries and flow cells.

NANO ENERGY (2022)

Article Chemistry, Physical

Highly dispersed Bi clusters for efficient rechargeable Zn-CO2 batteries

Miaosen Yang et al.

Summary: The study presents atomically dispersed Bi clusters supported on hollow carbon spheres as an effective electrocatalyst for reducing CO2 to formate with high faradaic efficiency and durability. The Zn-CO2 battery utilizing this catalyst achieves a peak power density and impressive cycle rechargeability, providing a promising alternative for CO2 utilization and energy storage.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Multidisciplinary Sciences

A membrane-based seawater electrolyser for hydrogen generation

Heping Xie et al.

Summary: This article introduces a method for direct seawater electrolysis for hydrogen production, which can solve the problems of side reactions and corrosion. In the experiment, this method stably operated for over 3200 hours under practical application conditions. The method is efficient, size-flexible, scalable, and has high practical value without increasing the operation cost.

NATURE (2022)

Article Energy & Fuels

A combined ionic Lewis acid descriptor and machine-learning approach to prediction of efficient oxygen reduction electrodes for ceramic fuel cells

Shuo Zhai et al.

Summary: The authors introduce a machine learning-driven approach to accelerate the discovery of efficient oxygen reduction electrodes for ceramic fuel cells by utilizing ionic Lewis acid strength as an effective physical descriptor. Experimental validation confirms the superior activity metrics of four oxides out of 6,871 distinct perovskite compositions, highlighting the importance of ISA in improving oxygen reduction reaction activity in perovskite oxides.

NATURE ENERGY (2022)

Article Chemistry, Physical

A Mn single atom catalyst with Mn-N2O2 sites integrated into carbon nanosheets for efficient electrocatalytic CO2 reduction

Wenfei Dong et al.

Summary: The electrocatalytic reduction of CO2 using electricity produced from renewable resources is an effective strategy for reducing CO2 emissions and promoting sustainable energy development. This study successfully synthesized a low Mn-content single-atom catalyst with efficient electrocatalytic performance for the CO2 reduction reaction.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Multidisciplinary

Electroreduction of Carbon Dioxide Driven by the Intrinsic Defects in the Carbon Plane of a Single Fe-N4 Site

Wenpeng Ni et al.

Summary: By coupling with single-atom Fe-N-4 sites, the activity of intrinsic carbon defects can be significantly improved, leading to remarkable enhancements in electrocatalytic performance for CO2 reduction. The resulting catalyst shows high CO Faradaic efficiency, CO selectivity, and current density, demonstrating great potential for the development of rechargeable Zn-CO2 batteries.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Cu acting as Fe activity promoter in dual-atom Cu/Fe-NC catalyst in CO2RR to C1 products

Xiaofei Wei et al.

Summary: By constructing a dual-atom center (Cu/Fe-NC) through incorporating Cu into Fe single-atom catalysts, this study demonstrated efficient CO2RR generation of multi-electron products CH3OH and CH4 with low limiting potentials. The synergistic effect of Fe as the active site and Cu as the activity promoter significantly improved the catalytic performance, providing a new avenue for CO2RR research.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Grain-Boundary-Engineered La2CuO4 Perovskite Nanobamboos for Efficient CO2 Reduction Reaction

Juan Wang et al.

Summary: This study reports La2CuO4 nanobamboo perovskite catalyst with rich twin boundaries, showing high Faraday efficiency in ethylene production. The superior performance of La2CuO4 nanobamboo originates from the active surfaces with intrinsic strain, which eliminates the electron transfer barrier of C-C coupling through the formation of gap states.

NANO LETTERS (2021)

Article Chemistry, Physical

Metal-Free Bifunctional Ordered Mesoporous Carbon for Reversible Zn-CO2 Batteries

Sanshuang Gao et al.

Summary: The use of NOMC as a cathode in Zn-CO2 batteries enables high efficiency and stability in CO2 reduction and oxygen evolution, which is promising for CO2 fixation and energy storage.

SMALL METHODS (2021)

Review Chemistry, Multidisciplinary

Linking the Dynamic Chemical State of Catalysts with the Product Profile of Electrocatalytic CO2 Reduction

Jiali Wang et al.

Summary: Research has revealed the critical impact of dynamic chemical states on CO2RR selectivity, providing new insights for fundamental understanding and efficient electrocatalyst design.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Density functional theory study of nitrogen-doped graphene as a high-performance electrocatalyst for CO2RR

Anmin Liu et al.

Summary: Metal-free catalysts, such as nitrogen-doped graphene, are of interest in enhancing CO2 utilization for mitigating global warming. Through DFT computations, it was found that site 43 of binary-N-doped graphene exhibited high CO2RR activity and stable adsorption of reactants. The catalysis process showed low free energy barriers and promoted the potential-limiting step, providing insights for the design of efficient CO2RR catalysts.

APPLIED SURFACE SCIENCE (2021)

Article Engineering, Environmental

Cu-modified Ni foams as three-dimensional outer anodes for high-performance hybrid direct coal fuel cells

Heping Xie et al.

Summary: By using Cu-modified Ni foams as the three-dimensional outer anode for high-performance HDCFC, the electrochemical reaction sites can be increased, facilitating electron and ion transport, and enhancing the durability of the fuel cell.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Crystal Splintering of β-MnO2 Induced by Interstitial Ru Doping Toward Reversible Oxygen Conversion

Yindong Gu et al.

Summary: This study presents the phenomenon of crystal splintering induced by interstitial atomic doping for enhancing the activities of both oxygen evolution and oxygen reduction reactions in beta-MnO2. The Ru-doped beta-MnO2 exhibits an ultralow OER and ORR voltage gap, surpassing many state-of-the-art bifunctional oxygen catalysts reported to date. The improved OER activity is attributed to the highly under-coordinated Ru-O sites exposed on the surface upon crystal splintering, while the enhanced ORR property originates from the strained M-O configuration with enriched Mn3+ content and oxygen vacancies.

CHEMISTRY OF MATERIALS (2021)

Article Chemistry, Physical

Fundamental Aspects of Enhancing Low-Temperature CO2 Splitting to CO on a Double La2NiFeO6 Perovskite

Hyun Suk Lim et al.

Summary: This paper investigates the synergistic effect of binary Ni-Fe sites in La2NiFeO6 perovskite on low-temperature CO2 conversion to CO, demonstrating improved CO productivity and production rate compared to single LaNiO3 and LaFeO3 perovskites.

ACS CATALYSIS (2021)

Article Chemistry, Multidisciplinary

Elucidating the Electrocatalytic CO2 Reduction Reaction over a Model Single-Atom Nickel Catalyst

Song Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Multidisciplinary

Recent Development of CO2 Electrochemistry from Li-CO2 Batteries to Zn-CO2 Batteries

Jiafang Xie et al.

ACCOUNTS OF CHEMICAL RESEARCH (2019)

Review Chemistry, Physical

Recent Trends, Benchmarking, and Challenges of Electrochemical Reduction of CO2 by Molecular Catalysts

Kamal Elouarzaki et al.

ADVANCED ENERGY MATERIALS (2019)

Review Chemistry, Multidisciplinary

Electrolytic CO2 Reduction in a Flow Cell

David M. Weekes et al.

ACCOUNTS OF CHEMICAL RESEARCH (2018)

Article Physics, Condensed Matter

Advanced capabilities for materials modelling with QUANTUM ESPRESSO

P. Giannozzi et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2017)

Article Geochemistry & Geophysics

Effects of Fe doping on the structures and properties of hexagonal birnessites - Comparison with Co and Ni doping

Hui Yin et al.

GEOCHIMICA ET COSMOCHIMICA ACTA (2013)

Review Physics, Condensed Matter

QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials

Paolo Giannozzi et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2009)