☆ 4.7 Article

Highly alkaline stability poly(aryl ether piperidinium) anion exchange membranes with partial aryl ether segments

CHEMICAL ENGINEERING JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Host-guest coordination self-assembly gives anion exchange membranes better stability

Yongjiang Yuan et al.

Summary: This paper fabricates anion exchange membranes (AEM) with a macrocyclic host-guest structure and dynamic self-protection, which exhibit high ionic conductivity and alkali stability. The membranes achieve a hydroxide conductivity of 114 mS cm-1 at 80 degrees C and maintain 93% of their pre-test performance even after immersion in 5 M KOH at 80 degrees C for 1000 h. The highest peak power density of 406 mW cm-2 at 60 degrees C is achieved after the assembly of a single cell. Therefore, the new design using a long chain structure containing both host-guest as side chains is a promising direction for improving AEM performance.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Chemistry, Physical

Semi-interpenetrating anion exchange membranes using hydrophobic microporous linear poly(ether ketone)

Jia Hui Chen et al.

Summary: A series of anion exchange membranes (AEMs) with semi-interpenetrating polymer network (sIPN) incorporating crosslinked poly(biphenyl N-methylpiperidine) (PBP) and spirobisindane-based intrinsically microporous poly(ether ketone) (PEK-SBI) have been prepared to achieve high ionic conductivity and improved chemical stability. The AEMs exhibit phase separated structures, promoting the hydroxide ion conductivity. Among them, the sIPN-90/10(PEK-SBI) AEM shows the highest hydroxide ion conductivity of 122.4 mS cm-1 and good alkaline stability. Moreover, it can achieve a peak power density of 481 mW cm-2 in a hydrogen/oxygen single cell.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

添加到收藏夹

Article Engineering, Chemical

The influence of anion-exchange membrane nanostructure onto ion transport: Adjusting membrane performance through fabrication conditions

Lukas Fischer et al.

Summary: We fabricated dense anion-exchange membranes and rationally controlled the nanostructure by designing fabrication conditions and adding ionic liquid. We optimized the macroscopic properties and ion transport rates by tailoring the solidified membranes through heat or solvent annealing.

JOURNAL OF MEMBRANE SCIENCE (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

A pi-Conjugated Anion-Exchange Membrane with an Ordered Ion-Conducting Channel via the McMurray Coupling Reaction

Fan Zhang et al.

Summary: In this study, pi-conjugated anion exchange membranes (AEMs) were synthesized using the McMurry coupling reaction. The resulting AEMs exhibited high ion conductivity and alkaline stability. These membranes showed promising performance in fuel cell applications.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

添加到收藏夹

Review Engineering, Environmental

Progress in constructing high-performance anion exchange Membrane: Molecular design, microphase controllability and In-device property

Bowen Yang et al.

Summary: Hydrogen is a promising energy carrier for decarbonization. Anion exchange membrane (AEM) is a critical component for AEMWE and AEMFC, and understanding its molecular structure, physical property, and chemical micro-environment is essential for rational design and development of AEM technology. This review comprehensively summarizes the wide scope of AEM category, investigates AEM ionic conductivity and durability, and highlights the research progress and bottleneck issues in the AEM community.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Environmental

Helical configuration channels boost performance in anion exchange membranes

Yang Zhang et al.

Summary: Anion exchange membranes with biomimetic helical conduction channels were prepared. The helical structures enhance ion conduction and water retention, making these membranes promising for high performance applications.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Environmental

Efficient transport of active species in triple-phase boundary through Paddle-Effect of ionomer for alkaline fuel cells

Junliang Zhao et al.

Summary: This study investigates the transport mechanism of active species in the catalyst layer of alkaline anion exchange membrane fuel cells (AEMFCs) by synthesizing and characterizing ionomers. The results indicate that the free flow of water and the paddle effect of the ionomer substituent play a crucial role in enhancing active species transport in the catalyst layer.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Environmental

Crown-ether block copolymer based poly(isatin terphenyl) anion exchange membranes for electrochemical energy conversion devices

Shicheng Xu et al.

Summary: Poly(isatin terphenyl) based polymers were synthesized from dibenzo-18-crown-6, terphenyl, and isatin via polycondensation and then quaternized with (6-bromo-hexyl)-trimethylammonium bromides. The resulting membrane showed excellent hydroxide and bromide ion conductivity, as well as good stability in alkaline conditions. The composite membrane with glass fiber exhibited strong resistance to polybromide ions and achieved high coulombic efficiency and capacity retention in zinc bromine batteries.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Green & Sustainable Science & Technology

High-performance anion exchange membrane water electrolysis by polysulfone grafted with tetramethyl ammonium functionalities

C. Simari et al.

Summary: 'Green' hydrogen production using anion exchange membrane (AEM) water electrolysis is a promising approach to address the energy crisis. In order to achieve commercially viable hydrogen generation, improvements in AEM technology, including membrane stability, operating temperature, ion conductivity, power performance, and cost reduction, are essential.

MATERIALS TODAY SUSTAINABILITY (2023)

添加到收藏夹

Article Chemistry, Physical

High-strength, ultra-thin anion exchange membranes with a branched structure toward alkaline membrane fuel cells

Xiaofeng Li et al.

Summary: In this work, self-supporting anion exchange membranes with enhanced mechanical strength and ultrathin thickness were prepared using a branched monomer, 9-dodecylidene-9H-fluorene (DDF), to construct branched structures based on poly(arylene piperidinium)s. The optimized membrane exhibited low water swelling, high mechanical strength, and improved hydroxide conductivity, making it a promising candidate for fuel cells.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

添加到收藏夹

Article Engineering, Chemical

Soluble poly(aryl piperidinium) with extended aromatic segments as anion exchange membranes for alkaline fuel cells and water electrolysis

Min Liu et al.

Summary: The superacid-catalyzed polymerization and quaternization reaction is an effective method for preparing AEM materials with high conductivity and stability. The PQP-100 AEM shows excellent conductivity, morphology stability, catalytic efficiency, and advantages in membrane thickness.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Side-chain cation-grafted poly(biphenyl piperidine) membranes for anion exchange membrane fuel cells

Qiao Liu et al.

Summary: In this study, a series of novel poly(biphenyl piperidinium) membranes with superior conductivity and stability were successfully synthesized by tethering cationic groups to the backbone utilizing flexible hydrophobic alkyl spacers with various lengths. The long-term alkali resistance of AEMs can be improved by extending the length of the flexible alkyl chains appropriately. These membranes exhibited excellent film-forming ability and tensile strength, well-defined microphase separation, and achieved high power density and low voltage decay rate in fuel cell applications.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Physical

Crosslinked anion exchange membranes with regional intensive ion clusters prepared from quaternized branched polyethyleneimine/quaternized polysulfone

Dawei Dong et al.

Summary: AEMs with regionally dense ion clusters were prepared by crosslinking QPSU with QBPEI. Among them, QPSU/QBPEI-3 AEM exhibited the best performance, with good ionic conductivity and stability at high temperature.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Imidazole-Functionalized Multiquaternary Side-Chain Polyethersulfone Anion-Exchange Membrane for Fuel Cell Applications

Songsong Li et al.

Summary: A series of AEM membranes with different side chains and high-density cationic groups have been prepared for AEM fuel cells. These membranes exhibit high conductivity and acceptable physical properties, and density functional theory studies confirm their excellent alkali stability.

ACS APPLIED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Comb-shaped polyfluorene with variable alkyl chain length for application as anion exchange membranes

Fei Xu et al.

Summary: In this study, a series of comb-shaped polyfluorene copolymers with different lengths of side chains were developed using superacid-catalyzed Friedel-Grafts polycondensation. The direct introduction of comb-shaped alkyl side chains caused micro-phase separation in the AEMs, and PHPFP-QA with the longest side chain exhibited the highest ionic conductivity and power density. The polyfluorene-based AEMs showed excellent alkaline stability due to stable piperidinium cations and ether-free backbones.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Physical

Ultrathin anion exchange membranes with an improved OH- transfer rate for high-performance AEMFCs

Wanjie Song et al.

Summary: In this study, a freestanding ultrathin AEM with excellent mechanical strength and ionic conductivity was successfully fabricated, which is suitable for improving the performance of alkaline anion exchange membrane fuel cells.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Poly(Alkyl-Terphenyl Piperidinium) Ionomers and Membranes with an Outstanding Alkaline-Membrane Fuel-Cell Performance of 2.58 W cm-2

Nanjun Chen et al.

Summary: The study introduces aliphatic chain-containing PDTP copolymers to enhance the performance of AEMFCs. By reducing phenyl content in AEIs and improving mechanical properties in AEMs, PDTP materials exhibit excellent performance indicators such as mechanical properties, fuel barrier properties, ion conductivity, and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Engineering, Chemical

Highly stable electron-withdrawing C=O link-free backbone with branched cationic side chain as anion exchange membrane

Fan Zhang et al.

Summary: By synthesizing a novel electron-withdrawing polymer backbone with spacer-tunable ionic side chains, density functional theory studies show increased barrier heights for aryl-ether cleavage and quaternary ammonium group degradation. This leads to high ion conductivity and alkaline stability in the anion exchange membrane.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Constructing micro-phase separation structure to improve the performance of anion-exchange membrane based on poly(aryl piperidinium) cross-linked membranes

Xinming Du et al.

Summary: By introducing a new preparation method, poly(biphenyl piperidine)s AEMs with micro-phase separation structures have been successfully constructed, improving alkaline stability while maintaining high ionic conductivity. The long-term performance under alkaline conditions is also excellent.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Zipped Interface: In Situ Covalent-Locking for High Performance of Anion Exchange Membrane Fuel Cells

Xian Liang et al.

Summary: By introducing a 3D-interfacial zipping concept, the challenges of mass transport resistances in polymer electrolyte membrane fuel cells are addressed, leading to enhanced power densities and long-term stabilities. The use of a bi-cationic quaternary-ammonium-based polyelectrolyte creates a covalently locked interface that prevents delamination without sacrificing fuel cell performance, as demonstrated in ex situ and in situ tests. A high power density of 1.5 W cm(-2) was achieved in a H-2/O-2 AEMFC test, with performance retention for at least 120 hours at a high current density of 0.6 A cm(-2).

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Anion exchange membrane based on poly(arylene ether ketone) containing long alkyl densely quaternized carbazole derivative pendant

Di Liu et al.

Summary: The PAEK-HQACz-x membranes, with long alkyl chains promoting well-defined microscopic phase separation morphology, showed high hydroxide conduction and controlled dimensional variation, with a hydroxide conductivity of 98.1 mS cm(-1) and a swelling ratio of only 13.5% at 80 degrees C. Attaching long alkyl chains onto the quaternized carbazole derivative pendant significantly improved membrane toughness and alkaline stability, making them promising candidates for anion exchange membranes.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Poly(fluorenyl aryl piperidinium) membranes and ionomers for anion exchange membrane fuel cells

Nanjun Chen et al.

Summary: The study presents a series of durable poly(fluorenyl aryl piperidinium) ionomers and membranes with high OH- conductivity and excellent mechanical properties for improved performance of alkaline fuel cells. Innovative design of poly(fluorenyl aryl piperidinium) copolymers is explored to extend their applications in anion exchange membrane fuel cells.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Engineering, Chemical

Rational design of comb-shaped poly(arylene indole piperidinium) to enhance hydroxide ion transport for H2/O2 fuel cell

Xixing Zhou et al.

Summary: This study proposes a ternary copolymerization strategy to produce anion exchange membranes with high conductivity and chemical stability, utilizing comb-shaped copolymers with hydrophobic side chains attached to the backbone to stabilize the cation and achieve favorable morphology and performance.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Anion conductive piperidinium based poly (ether sulfone): Synthesis, properties and cell performance

Su Li et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

添加到收藏夹

Article Polymer Science

High-Performance Anion Exchange Membranes with Para-Type Cations on Electron-Withdrawing C=O Links Free Backbone

Fan Zhang et al.

MACROMOLECULES (2020)

添加到收藏夹

Article Polymer Science

Chemically Stable, Highly Anion Conductive Polymers Composed of Quinquephenylene and Pendant Ammonium Groups

Ryo Akiyama et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Energy & Fuels

Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells

Junhua Wang et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Adsorption of Polyaromatic Backbone Impacts the Performance of Anion Exchange Membrane Fuel Cells

Ivana Matanovic et al.

CHEMISTRY OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of Surface Alignment on Connectivity in Phosphonium-Containing Diblock Copolymer Anion-Exchange Membranes

Austin M. Barnes et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Chemistry, Physical

Bis-imidazolium based poly(phenylene oxide) anion exchange membranes for fuel cells: the effect of cross-linking

Bencai Lin et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Development of a high-performance anion exchange membrane using poly(isatin biphenylene) with flexible heterocyclic quaternary ammonium cations for alkaline fuel cells

Shuai Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Toward Improved Alkaline Membrane Fuel Cell Performance Using Quaternized Aryl-Ether Free Polyaromatics

Sandip Maurya et al.

CHEMISTRY OF MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning the properties of poly(2,6-dimethyl-1,4-phenylene oxide) anion exchange membranes and their performance in H-2/O-2 fuel cells

Lei Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Engineering, Chemical

Hydrophilic side chain assisting continuous ion-conducting channels for anion exchange membranes

Yu Pan et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Alkaline polymer electrolyte fuel cells stably working at 80 °C

Hanging Peng et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rational design of polyaromatic ionomers for alkaline membrane fuel cells with > 1 W cm(-2) power density

Sandip Maurya et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Engineering, Chemical

Imidazolium-functionalized poly (arylene ether ketone) cross-linked anion exchange membranes

Xinming Du et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Surface Adsorption Affects the Performance of Alkaline Anion-Exchange Membrane Fuel Cells

Sandip Maurya et al.

ACS CATALYSIS (2018)

添加到收藏夹

Article Chemistry, Physical

Poly(arylene alkylene)s with pendant N-spirocyclic quaternary ammonium cations for anion exchange membranes

Thanh Huong Pham et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Review Chemistry, Physical

Quaternized aryl ether-free polyaromatics for alkaline membrane fuel cells: synthesis, properties, and performance - a topical review

Eun Joo Park et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Polymer Science

DABCO-functionalized polysulfones as anion-exchange membranes for fuel cell applications: Effect of crosslinking

Maria Teresa Perez-Prior et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2017)

添加到收藏夹

Article Polymer Science

Ion Transport Properties of Mechanically Stable Symmetric ABCBA Pentablock Copolymers with Quaternary Ammonium Functionalized Midblock

S. Piril Ertem et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2017)

添加到收藏夹

Article Polymer Science

Poly(terphenylene) Anion Exchange Membranes: The Effect of Backbone Structure on Morphology and Membrane Property

Woo-Hyung Lee et al.

ACS MACRO LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Dimensionally stable hexamethylenetetramine functionalized polysulfone anion exchange membranes

Wanting Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Polymer Science

Systematic Alkaline Stability Study of Polymer Backbones for Anion Exchange Membrane Applications

Angela D. Mohanty et al.

MACROMOLECULES (2016)

添加到收藏夹

Article Chemistry, Physical

Side-chain-type anion exchange membranes bearing pendant quaternary ammonium groups via flexible spacers for fuel cells

Chen Xiao Lin et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Polymer Science

Robust Hydroxide Ion Conducting Poly(biphenyl alkylene)s for Alkaline Fuel Cell Membranes

Woo-Hyung Lee et al.

ACS MACRO LETTERS (2015)

添加到收藏夹

Article Chemistry, Physical

Alkaline Stability of Benzyl Trimethyl Ammonium Functionalized Polyaromatics: A Computational and Experimental Study

Yoong-Kee Choe et al.

CHEMISTRY OF MATERIALS (2014)

添加到收藏夹

Article Electrochemistry

Influence of Sulfone Linkage on the Stability of Aromatic Quaternary Ammonium Polymers for Alkaline Fuel Cells

Alina Amel et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly Stable Alkaline Polymer Electrolyte Based on a Poly(ether ether ketone) Backbone

Juanjuan Han et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

添加到收藏夹

Article Engineering, Chemical

Stable and hydroxide ion conductive membranes for fuel cell applications: Chloromethyaltion and amination of poly(ether ether ketone)

Amaranadh Jasti et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Two-dimensional NMR spectroscopy reveals cation-triggered backbone degradation in polysulfone-based anion exchange membranes

Christopher G. Arges et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2013)

添加到收藏夹

Article Polymer Science

Precision Synthesis of Narrow Polydispersity, Ultrahigh Molecular Weight Linear Aromatic Polymers by A2 + B2 Nonstoichiometric Step-Selective Polymerization

Alfredo R. Cruz et al.

MACROMOLECULES (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tertiary sulfonium as a cationic functional group for hydroxide exchange membranes

Bingzi Zhang et al.

RSC ADVANCES (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anion Conductive Block Poly(arylene ether)s: Synthesis, Properties, and Application in Alkaline Fuel Cells

Manabu Tanaka et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Soluble and Highly Conductive Ionomer for High-Performance Hydroxide Exchange Membrane Fuel Cells

Shuang Gu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2009)

添加到收藏夹

Article Polymer Science

Synthesis and Characterization of Poly(phenylene)-Based Anion Exchange Membranes for Alkaline Fuel Cells

Michael R. Hibbs et al.

MACROMOLECULES (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.