4.3 Review

A comprehensive review on photocatalytic removal of heavy metal ions by polyaniline-based nanocomposites

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Polymer Science

Synthesis and microwave absorption studies on 2D graphitic carbon nitride loaded polyaniline/polyvinyl alcohol nanocomposites

Narayanasamy Kavitha et al.

Summary: A lightweight electromagnetic interference shielding and microwave absorbing composite film has been developed by loading varying weight content of graphitic carbon nitride (g-C3N4) nanosheets and polyaniline (PANI) into a polyvinyl alcohol (PVA) matrix. The composite film exhibits improved electrical conductivity, dielectric loss, and dielectric constant, along with good compatibility and porous structure.

HIGH PERFORMANCE POLYMERS (2023)

Article Environmental Sciences

Eliminating pesticide quinalphos from surface waters using synthesized GO-ZnO nanoflowers: Characterization, degradation pathways and kinetic study

Renuka Garg et al.

Summary: The study successfully synthesized zinc oxide nanoflowers and graphene oxide-zinc oxide hybrid nanocomposites, and demonstrated their superior performance in degrading and mineralizing quinalphos. Through photocatalysis, 90% of quinalphos was mineralized in 90 minutes, with degradation pathways confirmed through TOC and LCMS analysis.

CHEMOSPHERE (2022)

Article Environmental Sciences

Sustainable removal of Cr(VI) using graphene oxide-zinc oxide nanohybrid: Adsorption kinetics, isotherms and thermodynamics

Simranjeet Singh et al.

Summary: In this study, ZnO-GO nanohybrid was synthesized through a solvothermal process for the removal of hexavalent chromium from aqueous solutions. The nanocomposite showed excellent adsorption capacity for Cr(VI) at near-neutral pH levels, following Langmuir isotherm and pseudo 2nd order kinetics model.

ENVIRONMENTAL RESEARCH (2022)

Article Chemistry, Physical

3D interconnected g-C3N4 hybridized with 2D Ti3C2 MXene nanosheets for enhancing visible light photocatalytic hydrogen evolution and dye contaminant elimination

Dong Liu et al.

Summary: In this study, a high-efficiency 3D/2D g-C3N4/Ti3C2 heterojunction photocatalyst was designed for photocatalytic hydrogen evolution and organic dye elimination. The excellent performance of the material is attributed to its 3D interconnected porous structure and the incorporation of Ti3C2 nanosheets, providing a high specific surface area and efficient charge migration. Mechanisms for the improved photocatalytic performance were analyzed through characterization measurements, active species analysis, and density functional theory calculations.

APPLIED SURFACE SCIENCE (2022)

Article Engineering, Environmental

Facile synthesis of three-dimensional hollow porous carbon doped polymeric carbon nitride with highly efficient photocatalytic performance

Dong Liu et al.

Summary: Developing a highly efficient metal-free catalyst with a fast H-2 evolution rate and efficient pollutant degradation efficiency is of great importance. In this study, a novel and feasible strategy to develop a highly efficient three-dimensional hollow porous C-doped polymeric carbon nitride (CPCN) catalyst based on morphological controls and in situ C doping was reported. The as-synthesized CPCN catalysts showed outstanding H-2 production activity and high degradation rate of diclofenac under visible light.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Anionic Methyl Orange Removal from Aqueous Solutions by Activated Carbon Reinforced Conducting Polyaniline as Adsorbent: Synthesis, Characterization, Adsorption Behavior, Regeneration and Kinetics Study

A. Bekhoukh et al.

Summary: The study found that the PANI@CA adsorbent had higher specific surface area and mesoporous volume, demonstrating superior removal capacity for MO compared to PANI alone. Kinetic and isothermal analysis indicated that the pseudo second order kinetics and Langmuir model provided better fit to the experimental results.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2022)

Article Multidisciplinary Sciences

Removal of mercury(II) from aqueous solution by partially reduced graphene oxide

Talia Tene et al.

Summary: A partially reduced graphene oxide has been proposed as an effective adsorbent material for the removal of Hg(II) from water. The material exhibits high adsorption capacity and efficiency in reducing the concentration of Hg(II). The adsorption process involves both physisorption and chemisorption.

SCIENTIFIC REPORTS (2022)

Article Chemistry, Physical

Improved photocatalytic performance of p-n heterostructure Ag-Ag2MoO4/polyaniline for chromium (VI) reduction and dye degradation

Di-Yang Peng et al.

Summary: A novel p-n heterostructure Ag-Ag2MoO4/polyaniline composite was synthesized, which exhibited enhanced photocatalytic activity by improving the transfer and separation of photogenerated electron-hole pairs. The composite showed high degradation activity towards Cr(VI) and MO under visible-light irradiation, indicating its potential application.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Geochemistry & Geophysics

UV and Visible Light Induced Photodegradation of Reactive Red 198 Dye and Textile Factory Wastewater on Fe2O3/Bentonite/TiO2 Nanocomposite

Shakiba Mohammadhosseini et al.

Summary: This study investigates the degrading capacity of Fe2O3/Bentonite/TiO2 nanoparticles as catalysts for Reactive Red 198 dye and textile factory wastewater under visible and UV light. The synthesized catalyst shows excellent efficiency in complete degradation of the target pollutant within 60 minutes under UV light, and 90 minutes under visible light. Additionally, the catalyst is easy to separate and collect, maintaining high photocatalytic efficiency and reusability.

MINERALS (2022)

Review Chemistry, Multidisciplinary

Review of Clay-Based Nanocomposites as Adsorbents for the Removal of Heavy Metals

Ismael Kithinji Kinoti et al.

Summary: Water contamination caused by rapid industrialization, urbanization, and modern human activities is a significant global threat. The development of affordable water remediation technologies to improve water quality is essential. Nanotechnology has gained increasing interest due to its application in eco-friendly, cost-effective, and durable material production. This study reviews recent nanocomposite technologies based on clay for the removal of heavy metals from wastewater and points out the shortcomings of existing methods.

JOURNAL OF CHEMISTRY (2022)

Proceedings Paper Materials Science, Multidisciplinary

Synthesis, characterisation and electrochemical application of hybrid nanocomposites of polyaniline with novel clay mineral

Ragupathy Ragavan Baby Suneetha et al.

Summary: Polyaniline-Indian clay nanocomposites were synthesized by purifying Indian clay and polymerizing aniline with the clay. The nanocomposites showed enhanced thermal stability and electrochemical response, indicating their potential applications.

MATERIALS TODAY-PROCEEDINGS (2022)

Review Chemistry, Multidisciplinary

Review of Clay-Based Nanocomposites as Adsorbents for the Removal of Heavy Metals

Ismael Kithinji Kinoti et al.

Summary: Water contamination due to rapid industrialization and urbanization is a major global threat. Nanocomposite technologies based on clay show promise in removing heavy metals from wastewater. Clay, abundant on Earth's surface, can be easily modified to improve adsorption capabilities for efficient removal of heavy metal contaminants.

JOURNAL OF CHEMISTRY (2022)

Article Environmental Sciences

Photocatalytic degradation of imidacloprid using semiconductor hybrid nano-catalyst: kinetics, surface reactions and degradation pathways

R. Garg et al.

Summary: The study focused on the degradation and mineralization of imidacloprid in surface waters using hybrid nano-catalysts g-C3N4/ZnO with different compositions. The g-C3N4/ZnO (20:80) catalyst showed the highest degradation efficiency (95.6%) under UV-C light intensity of 15 W/m(2) and pH 7, attributed to its improved surface area, lower bandgap, and lower photoluminescence intensity. Analysis using LC-MS revealed the formation of various by-products during the degradation process.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2021)

Review Polymer Science

Polyaniline-TiO2-based photocatalysts for dyes degradation

Nirmala Kumari Jangid et al.

Summary: Polyaniline-TiO2-based photocatalysis shows great potential for environmental remediation by dye degradation, with excellent photocatalytic activity under both ultraviolet light and natural sunlight irradiation.

POLYMER BULLETIN (2021)

Article Engineering, Environmental

Enhanced visible light photoelectrocatalytic degradation of tetracycline hydrochloride by I and P co-doped TiO2 photoelectrode

Dong Liu et al.

Summary: The study prepared I and P co-doped TiO2 materials for the first time, showing significantly improved photoelectrocatalytic activity. The highest activity was achieved when the doping content of P was 4 at% under visible light.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Materials Science, Composites

Polyaniline/Nanomaterial Composites for the Removal of Heavy Metals by Adsorption: A Review

Hind Hajjaoui et al.

Summary: The study highlights the importance of adsorption as a major method for removing heavy metal pollutants from water, with the development of efficient and selective adsorbents being crucial. The research provides a detailed overview of the synthesis methods of nanocomposite materials based on polyaniline and nanomaterials, evaluating their efficiency in adsorbing heavy metals from aqueous solution and reporting on regeneration studies.

JOURNAL OF COMPOSITES SCIENCE (2021)

Article Engineering, Environmental

Highly efficient removal of hexavalent chromium from aqueous solution by calcined Mg/Al-layered double hydroxides/polyaniline composites

Feng-Lan Long et al.

Summary: The study synthesized PANI/LDOs and investigated their performance in removing hexavalent chromium. The results showed that PANI/LDOs have great potential in Cr(VI) removal and can be a promising material for wastewater treatment.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Synthesis of Gum Acacia Capped Polyaniline-Based Nanocomposite Hydrogel for the Removal of Methylene Blue Dye

Tippabattini Jayaramudu et al.

Summary: A novel GPA NCHs hydrogel was developed for the removal of MB dye, with adsorption capacity highly dependent on GA-PANI dosage, pH, and dye concentration. The adsorption process followed pseudo-second-order kinetics and fit well with Langmuir and Freundlich isotherms, demonstrating its promising potential for removing MB dye from contaminated aqueous systems.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

Article Materials Science, Multidisciplinary

Polycrystalline TiO2 particles synthesized via one-step rapid heating method as electrons transfer intermediate for Rhodamine B removal

Sin-Ling Chiam et al.

Summary: A one-step rapid heating method for the synthesis of polycrystalline TiO2 particles was demonstrated in this study, which exhibited promising photocatalytic performance in degrading organic dyes under visible light irradiation. The synthesized TiO2 particles were found to be a mixture of anatase and brookite phases, with crystal defects and self-sensitization of RhB contributing to enhanced electron production for degradation of RhB molecules.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Review Polymer Science

Synthesis and factor affecting on the conductivity of polypyrrole: a short review

Ai Ling Pang et al.

Summary: The article comprehensively elaborates on the methods used to synthesize conductive Polypyrrole (PPy) and the important factors affecting its conductivity, highlighting the importance of controlling microstructural features to adjust PPy conductivity. Despite extensive research, no previous study has presented all possible relevant information about PPy fabrication and the key factors influencing its electrical conductivity.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

Review Chemistry, Physical

Influence of polyaniline on the photocatalytic properties of metal nanocomposites: A review

Ankita Yadav et al.

Summary: This review article discusses recent advancements in the field of photo-catalysis, focusing on the enhancement of photocatalytic properties using PANI with different metal oxide nanoparticles and their nanocomposites over the past three decades. The mechanism of photo-catalysis and improvements in the photocatalytic property of metal oxide nanoparticles are detailed, with the potential benefits in the development of advanced functional conducting polymer-based nanocomposite materials for various applications.

COLLOID AND INTERFACE SCIENCE COMMUNICATIONS (2021)

Review Chemistry, Multidisciplinary

A Review on Heavy Metal Ions and Containing Dyes Removal Through Graphene Oxide-Based Adsorption Strategies for Textile Wastewater Treatment

Sasireka Velusamy et al.

Summary: Textile wastewater heavy metal pollution has become a severe global environmental issue, with significant impacts on natural water resources and human health. Graphene oxide as an adsorbent exhibits advantages in efficient removal of heavy metal ions, playing a crucial role in the remediation of textile wastewater.

CHEMICAL RECORD (2021)

Review Environmental Sciences

Significance of conducting polyaniline based composites for the removal of dyes and heavy metals from aqueous solution and wastewaters - A review

S. Senguttuvan et al.

Summary: Polyaniline-based composites are effective in removing and detoxifying dyes and heavy metals from wastewater, by adsorbing and converting them into less toxic states. Further research is needed to understand the impact of various conditions and experimental variables on the removal of dyes and heavy metals.

CHEMOSPHERE (2021)

Article Chemistry, Multidisciplinary

Degradation mechanism, reaction pathways and kinetics for the mineralization of Bisphenol A using hybrid ZnO/graphene oxide nano-catalysts

Renuka Garg et al.

Summary: This study successfully degraded BPA using ZG(0.6) nano-catalyst with improved surface area and efficient charge separation, leading to high photocatalytic activity. The degradation mechanism and pathways were detailed with identification of reaction intermediates, showing the formation of smaller by-products like phenol and hydroquinol. The developed ZG(0.6) nano-catalyst was found to be reusable for multiple runs with effective charge separation.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2021)

Article Chemistry, Applied

Synthesis of conductive polyaniline-carbon nanofiber nanocomposite with chenille like morphology for photocatalytic coatings applications

Kamini Turan et al.

Summary: Pristine carbon nanofibers dispersed with Triton X-100 and acid oxidized were used to prepare PANI/CNF nanocomposites via low-temperature in-situ polymerization. The unique core-shell structure, facilitated by Triton X-100, showed a tunable band gap, enhanced surface area, and improved charge transfer properties, making them potential active photovoltaic coatings for environmentally exposed surfaces.

PROGRESS IN ORGANIC COATINGS (2021)

Review Chemistry, Physical

Clay-Polymer Nanocomposites: Preparations and Utilization for Pollutants Removal

Abdelfattah Amari et al.

Summary: Adsorption is considered the most effective technique for treating water with biological, organic, and inorganic contaminants, with CPNs receiving attention for their efficient removal of various pollutants. By combining clay minerals and polymers to create CPNs, the advanced properties of these materials allow for the effective removal of organic and inorganic pollutants from water.

MATERIALS (2021)

Article Polymer Science

In Situ Functionalization of Iron Oxide Particles with Alginate: A Promising Biosorbent for Retention of Metal Ions

Alina-Roxana Lucaci et al.

Summary: In this study, alginate extracted from marine algae biomass was used to functionalize iron oxide particles, resulting in the preparation of a new biosorbent. The obtained Alg-Fe3O4-MPs showed high biosorption capacity for Cu(II), Co(II) and Zn(II) ions. The Langmuir model was found to be the best fitted model for the equilibrium data, and biosorption kinetics followed the pseudo-second order model.

POLYMERS (2021)

Review Environmental Sciences

An overview on non-spherical semiconductors for heterogeneous photocatalytic degradation of organic water contaminants

Ehsan Nazarzadeh Zare et al.

Summary: The article discusses the significance of removing organic contaminants from water sources due to their carcinogenicity and mutagenicity, highlighting the limitations of conventional water decontamination methods and the research progress on using non-spherical semiconductors in photocatalytic degradation of organic pollutants. It also touches upon the mechanisms and factors influencing photocatalytic reactions, as well as the current challenges and future research perspectives in this field.

CHEMOSPHERE (2021)

Article Chemistry, Physical

Effect of morphology and phase engineering of MoS2 on electrochemical properties of carbon nanotube/polyaniline@MoS2 composites

Juguo Dai et al.

Summary: This study synthesized a carbon nanotube/polyaniline@MoS2 composite with excellent electrochemical properties, good cycling stability (retaining 80.8% capacitance after over 5000 cycles), and superior energy density in supercapacitor devices. The unique morphology of MoS2 shells in the composites facilitates rapid charge transport and ionic diffusion, improving capacitance and stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Environmental Sciences

Preparation of PANI Modified ZnO Composites via Different Methods: Structural, Morphological and Photocatalytic Properties

Nazli Turkten et al.

Summary: In this study, polyaniline modified zinc oxide (PANI-ZnO) photocatalyst composites were synthesized to address the dissolution disadvantage of zinc oxide. The hybridization method using emeraldine base of polyaniline (PANI-EB) was found to be more efficient in preparing PANI-ZnO composites under neutral conditions. The photocatalytic performance of PANI-ZnO composites was significantly enhanced compared to sole ZnO, with the hybridization method showing better efficiency.
Article Chemistry, Physical

Efficient visible-light-driven photocatalytic reduction of hexavalent chromium by three-dimensional heterostructure PANI@SnS2@carbon sphere

Xiaofeng Huang et al.

Summary: In this study, a PANI@SnS2@Cs heterostructure composite was prepared to improve the photoreduction performance and adsorption capability by reducing the rapid recombination of photogenerated carriers. The composite demonstrated efficient purification of Cr(VI) contaminated water under solar light within a short period of time. Characterizations were conducted to confirm the heterostructure and optical performance of the composite, while the mechanism of charge transfer between PANI and SnS2 was also investigated.

APPLIED SURFACE SCIENCE (2021)

Review Engineering, Environmental

Polyaniline-based adsorbents for aqueous pollutants removal: A review

Akbar Samadi et al.

Summary: This paper provides a comprehensive review of typical PANI-based adsorbents and their properties, discussing the removal of various aqueous contaminants by PANI-based adsorbents and assessing the altered morphology, pore size, surface charge, and functional groups of the adsorbents through unique doping/dedoping processes. The adsorption mechanisms of aqueous pollutants by PANI-based adsorbents include a variety of interactions, leading to enhanced adsorption performance. Future outlooks focus on the application prospects of PANI-based adsorbents in the removal of water pollutants.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Environmental Sciences

Characterization and performance evaluation of synthesized ZnO nanoflowers, nanorods, and their hybrid nanocomposites with graphene oxide for degradation of Orange G

Renuka Garg et al.

Summary: ZnO nanoflowers and nanorods were synthesized and decorated on graphene oxide to form hybrid nanocomposites. The GO-ZnOnR nanocomposite showed the highest degradation efficiency during the photodegradation of Orange G.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Review Polymer Science

Preparations, Properties, and Applications of Polyaniline and Polyaniline Thin Films-A Review

Mahnoush Beygisangchin et al.

Summary: Polyaniline (PANI) is a well-known conductive polymer that has attracted significant attention in the field of nanotechnology. This review focuses on the preparation processes and various properties of PANI thin films, discussing its potential applications in electronics, drugs, and anti-corrosion materials. PANI's unique characteristics, such as high conductivity, easy synthesis, and environmental stability, make it a promising material for a wide range of applications.

POLYMERS (2021)

Article Materials Science, Multidisciplinary

Polypyrrole-polyaniline copolymer coated green rice husk ash as an effective adsorbent for the removal of hexavalent chromium from contaminated water

Soumi Dutta et al.

Summary: The study focused on fabricating and characterizing PPY-PANI@RHA for the removal of Cr(vi) from water, achieving a 98% removal rate under optimal conditions. The adsorption followed Elovich kinetics and the Freundlich isotherm, with a maximum adsorption capacity of 769.15 mg g-1. Thermodynamic investigations showed that the adsorption of Cr(vi) on PPY-PANI@RHA is endothermic, feasible, and spontaneous, indicating its potential as an effective bio adsorbent for wastewater treatment.

MATERIALS ADVANCES (2021)

Review Engineering, Environmental

Technological trends in heavy metals removal from industrial wastewater: A review

Rakesh Shrestha et al.

Summary: Rapid industrialization has led to heavy metal contamination in industrial wastewater, and traditional removal methods have limitations such as high sludge production and low removal efficiency. Newer, more efficient and innovative technologies are being investigated, with research evaluating the efficiency dependence on various parameters.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Proceedings Paper Materials Science, Multidisciplinary

Synthesis of g-C3N4/ZnO nanocomposite for photocatalytic degradation of a refractory organic endocrine disrupter

Renuka Garg et al.

Summary: The g-C3N4/ZnO nanocomposite was synthesized successfully using the co-precipitation method, characterized by various techniques, and demonstrated excellent photocatalytic activity for the degradation of bisphenol A. The nanocomposite showed superior degradation efficiency compared to ZnO and g-C3N4 individually, attributed to its higher surface area.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Engineering, Environmental

Photodegradation of rhodamine B-dye pollutant using CaCu3Ti4O12-multiwall carbon nanotube nanocomposites

Mohsen Ahmadipour et al.

Summary: The addition of MWCNT led to a decrease in crystallite size and an increase in surface area, as well as a decrease in optical bandgap energy of CaCu3Ti4O12, making it a promising photocatalyst for environmental applications. Coupling CaCu3Ti4O12 with 0.3 wt% of MWCNT resulted in the highest photodegradation efficiencies under UV and visible light illumination. The kinetic data fitted a pseudo-first-order model showing the potential for enhancing the photocatalytic performance of CaCu3Ti4O12 using MWCNT.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Removal of acetaminophen using Fe2O3-TiO2 nanocomposites by photocatalysis under simulated solar irradiation: Optimization study

Omar Fawzi Suleiman Khasawneh et al.

Summary: Acetaminophen (ACT) is an environmental contaminant that poses a threat to human health and aquatic life. Conventional wastewater treatment methods are ineffective in removing ACT, necessitating the use of advanced oxidation processes. By synthesizing Fe2O3-TiO2 nanocomposites, the surface area was increased, particle size reduced, optical properties enhanced, and the bandgap decreased, resulting in improved photocatalytic degradation of ACT.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Biochemistry & Molecular Biology

Preparation and characterization of polylactic acid/polyaniline/nanocrystalline cellulose nanocomposite films

Xiaoyu Wang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Article Multidisciplinary Sciences

Polyaniline-TiO2 composite photocatalysts for light-driven hexavalent chromium ions reduction

Xiaoming Deng et al.

SCIENCE BULLETIN (2020)

Review Environmental Sciences

An overview of photocatalytic degradation: photocatalysts, mechanisms, and development of photocatalytic membrane

Weng Shin Koe et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Review Chemistry, Multidisciplinary

Recent advances in MXenes supported semiconductors based photocatalysts: Properties, synthesis and photocatalytic applications

Cheera Prasad et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Review Materials Science, Multidisciplinary

Nanocomposites based on graphene analogous materials and conducting polymers: a review

Matthew J. Dunlop et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Review Engineering, Chemical

A review on polyaniline-based materials applications in heavy metals removal and catalytic processes

Effat Eskandari et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

UV and Visible light photodegradation of methylene blue with graphene decorated titanium dioxide

M. A. Acosta-Esparza et al.

MATERIALS RESEARCH EXPRESS (2020)

Review Chemistry, Physical

Conductive polymers in water treatment: A review

Ali Taghizadeh et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Review Green & Sustainable Science & Technology

A critical review on application of photocatalysis for toxicity reduction of real wastewaters

Juan Jose Rueda-Marquez et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Chemistry, Physical

Application of three dimensional porous aerogels as adsorbent for removal of heavy metal ions from water/wastewater: A review study

Maryam Hasanpour et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)

Review Engineering, Environmental

Metal oxides and metal organic frameworks for the photocatalytic degradation: A review

Sanjeev Gautam et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Polymer Science

In situ synthesis and characterization of polyaniline/prussian blue/zinc oxide nanocomposite

Suganthi Muthusamy et al.

POLYMER BULLETIN (2019)

Review Chemistry, Multidisciplinary

Advantages and disadvantages of techniques used for wastewater treatment

Gregorio Crini et al.

ENVIRONMENTAL CHEMISTRY LETTERS (2019)

Review Green & Sustainable Science & Technology

A review on cleaner strategies for chromium industrial wastewater: Present research and future perspective

Kirubanandam GracePavithra et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Review Environmental Sciences

Polyaniline-based adsorbents for removal of hexavalent chromium from aqueous solution: a mini review

Yilin Jiang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)

Article Engineering, Chemical

Polyaniline modified SnO2 nanoparticles for efficient photocatalytic reduction of aqueous Cr(VI) under visible light

Jing Li et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Article Materials Science, Multidisciplinary

Conducting polymer supported cerium oxide nanoparticle: Enhanced photocatalytic activity for waste water treatment

Boby Samai et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

Article Chemistry, Physical

Enhanced Photocatalytic Activity of Titania by Co-Doping with Mo and W

Osmin Aviles-Garcia et al.

CATALYSTS (2018)

Review Environmental Sciences

Application of doped photocatalysts for organic pollutant degradation - A review

Mohammad Reza Delsouz Khaki et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2017)

Article Chemistry, Physical

Enhanced photocatalytic degradation of atenolol using graphene TiO2 composite

Vibhu Bhatia et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2017)

Review Water Resources

Parameters affecting the photocatalytic degradation of dyes using TiO2: a review

Khan Mamun Reza et al.

APPLIED WATER SCIENCE (2017)

Article Chemistry, Physical

Hollow cobalt ferrite-polyaniline nanofibers as magnetically separable visible-light photocatalyst for photodegradation of methyl orange

Kyung Nam Kim et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2016)

Article Materials Science, Multidisciplinary

Polyoxometalate enhances the photocatalytic performance of polyaniline/SnO2 composites

Huiyan Ma et al.

MATERIALS LETTERS (2016)

Review Nanoscience & Nanotechnology

Polyaniline (PANi) based electrode materials for energy storage and conversion

Huanhuan Wang et al.

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2016)

Article Chemistry, Physical

Preparation of three-dimensional PANI/GO for the separation of Hg(II) from aqueous solution

Qiaohui Fan et al.

JOURNAL OF MOLECULAR LIQUIDS (2015)

Review Chemistry, Physical

Dye and its removal from aqueous solution by adsorption: A review

Mustafa T. Yagub et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2014)

Article Chemistry, Physical

Flexible polyaniline-coated TiO2/SiO2 nanofiber membranes with enhanced visible-light photocatalytic degradation performance

Zhenyan Liu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)

Article Chemistry, Physical

Conducting Polyaniline Nanowire Arrays for High Performance Supercapacitors

Kai Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Article Chemistry, Physical

Adsorption of sulfonated dyes by polyaniline emeraldine salt and its kinetics

Debajyoti Mahanta et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2008)

Article Energy & Fuels

Semiconductor-catalyzed degradation of phenols with sunlight

C. Karunakaran et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)