4.7 Article

Blue-light pumped NIR emission of LaOF:Pr3+ nanorods for highly sensitive nanothermometry

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Coactivated cyan emitting phosphors in optical thermometry using thermally and non- thermally coupled levels

Manisha Prasad et al.

Summary: The tunability of upconversion emission was achieved by varying dopant concentration and optimized in the cyan emitting region. Optical bistability was observed in Tm3+/Yb3+: MgWO4 phosphors. The CIE coordinates shifted towards the green region upon Er3+ doping. Decay curve analysis was performed for the developed phosphors. The optical thermometry using the fluorescence intensity ratio (FIR) approach considered the thermally and non-thermally coupled levels of Er3+ and Tm3+ ions in the coactivated MgWO4 phosphors. The addition of Er3+ and Li+ improved the sensitivity of luminescence thermometry in Tm3+/Yb3+: MgWO4 phosphors, with higher sensitivity observed in the non-thermally coupled levels compared to the thermally coupled levels.

MATERIALS RESEARCH BULLETIN (2023)

Review Materials Science, Multidisciplinary

Recent development in color tunable phosphors: A review

M. D. Mehare et al.

Summary: Phosphor converted white light emitting diodes (w-LEDs) are gaining attention for their advantages including longer life, greater efficiency, compactness, reliability, low power consumption, and environmental friendliness. The quality of w-LEDs is influenced by phosphors, hence there is a focus on developing a high efficiency, chromatically stable, optimum color rendering index, and low associated color temperature single phase white light emitting phosphor. This review explores rare earth activated phosphors and their benefits for w-LEDs, as well as the energy transfer mechanism between sensitizer and activator doped with inorganic host phosphors to achieve color-tunable emission for w-LEDs.

PROGRESS IN MATERIALS SCIENCE (2023)

Article Materials Science, Ceramics

Luminescence and optical thermometry based on silico-carnotite Ca3Y2Si3O12: Pr3+ phosphor

Xiuying Tian et al.

Summary: The photoluminescence and temperature sensitivities of Ca3Y2Si3O12:Pr3+ thermophosphors with silico-carnotite structure were investigated, showing promising potential in the field of optical thermometry.

CERAMICS INTERNATIONAL (2022)

Article Optics

Pr3+-doped NaY(MoO4)2 phosphor for optical thermometry applications

Lili Tang et al.

Summary: The Pr3+-doped NaY(MoO4)(2) crystals were prepared by the hydrothermal method using sodium citrate as the chelating agent. The study showed different temperature dependencies of transitions and defined two groups of fluorescence intensity ratios for temperature characterization. The synthesized phosphors showed high relative sensitivity and potential for applications in optical thermometers and temperature measurements.

JOURNAL OF LUMINESCENCE (2022)

Article Materials Science, Ceramics

Pr3+-based single-band optical ratiometric thermometry

Yuanbo Yang et al.

Summary: This paper proposes a novel single-band ratiometric thermometry method that relies on the inverse response of red emission of Pr3+ in a low-cost host to temperature variation. The method shows high sensitivity.

CERAMICS INTERNATIONAL (2022)

Article Chemistry, Physical

La2Zr2O7:Pr3+ nanoparticles for luminescence thermometry based on a single parameter over a wide temperature range of 620 K

Forough Jahanbazi et al.

Summary: This study demonstrated the potential of La2Zr2O7:Pr3+ nanoparticles as optical temperature sensing materials with a wide temperature range. The luminescence temperature sensing was achieved by utilizing the intervalence charge transfer state of Pr3+ doping ion, and excellent optical thermometric performance was confirmed in a temperature range of 85-705 K for LZOP nanoparticles.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Inorganic & Nuclear

Ultra-sensitive luminescence thermometry based on MgNb2O6:Dy3+/Pr3+ thermochromic phosphors

Lei Zhong et al.

Summary: A novel ratiometric luminescence thermometry strategy was proposed in this study, combining the thermally induced redshift of the charge transfer band with the dramatic quenching of the intervalent charge transition in Dy3+ and Pr3+ doped MNO phosphors. The emission color of the sample changes significantly with temperature, allowing for visual temperature sensing. The Dy3+ and Pr3+ activated MNO phosphors show excellent sensitivity, signal resolution, reversibility, and temperature resolution, making them promising for luminescence thermometry and safety markers.

INORGANIC CHEMISTRY FRONTIERS (2022)

Article Materials Science, Ceramics

Luminescence and optical thermometry strategy based on emission and excitation spectra of Pr3+ doped SrMoO4 phosphors

Li Li et al.

Summary: Recent developments in luminescence ratiometric thermometry using Pr3+-activated SrMoO4 phosphors have shown promising potential for non-contact optical thermometry. The study explores the synthesis, crystal structure, and luminescence properties of these phosphors for temperature sensing applications.

CERAMICS INTERNATIONAL (2021)

Review Materials Science, Multidisciplinary

A review on molten salt synthesis of metal oxide nanomaterials: Status, opportunity, and challenge

Santosh K. Gupta et al.

Summary: The molten-salt synthesis (MSS) method is becoming an excellent bottom-up technique for synthesizing nanomaterials, offering advantages such as environmental friendliness, low cost, and ease of operation. This review article discusses the status, potential, and challenges of MSS for metal oxide nanomaterial synthesis, as well as the importance of synthesis on properties and applications of nanomaterials. It also covers different aspects of MSS, including the role of molten salt, choice of molten salt, synthesis parameters, oxosalts, and electrochemical aspects, while highlighting recent progress and successes in synthesizing various metal oxide nanomaterials.

PROGRESS IN MATERIALS SCIENCE (2021)

Article Engineering, Environmental

Ga-modified YAG:Pr3+ dual-mode tunable luminescence thermometers

Paulina Bolek et al.

Summary: The study focuses on Y3(Al,Ga)5O12:0.1%Pr phosphors with controlled Ga:Al composition to deliberately affect their luminescent properties. Results show that by tailoring the energy barrier for thermal quenching, the thermometric parameters of these phosphors can be fine tuned to cover a wider temperature range with higher relative sensitivity and lower temperature uncertainty. The relative temperature error between calculated and measured temperatures should also be considered when evaluating the performance of the thermometers.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Chemistry, Inorganic & Nuclear

Luminescent lanthanide nanocomposites in thermometry: Chemistry of dopant ions and host matrices

Anees A. Ansari et al.

Summary: Recent advancements in remote optical nanothermometry have been significant, particularly in the field of bio-applications such as theranostics and photodynamic therapy. The use of luminescence thermometry technique allows for accurate temperature monitoring in biological bodies. Selecting the appropriate host matrix is crucial in achieving high performance of optical nanothermometers.

COORDINATION CHEMISTRY REVIEWS (2021)

Article Materials Science, Multidisciplinary

Novel Down-converting single-phased white light Pr3+ doped BaWO4 Nanophosphors material for DSSC applications

R. Kamal et al.

Summary: White nanophosphors based on praseodymium-doped barium tungstate matrix were successfully synthesized by ultrasound-assisted hydrothermal method, showing high crystalline tetragonal phase and nano-cubic morphology. The photoluminescence spectra of PBWO displayed strong emission peaks covering the entire visible light region, making them promising materials for downconversion applications. By optimizing the concentration of Pr3+ ions, a high conversion efficiency of 8.08% was achieved in DSSCs compared to 4.17% efficiency of the non-modified DSSC, indicating the potential of these nanophosphors for enhancing solar cell performance through down-conversion luminescence process.

OPTICAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

Up- and Down-Convertible LaF3:Yb,Er Nanocrystals with a Broad Emission Window from 350 nm to 2.8 μm: Implications for Lighting Applications

Madhab Pokhrel et al.

Summary: In this study, molten-salt-synthesized LaF3:Yb3+,Er3+ (LFYE) nanocrystals (NCs) exhibited enhanced luminescence properties after annealing, but prolonged annealing led to reduced performance attributed to phase transition and shape changes. Additionally, density functional theory calculations indicated that the LOFYE nanocrystals are thermodynamically more favorable than the LFYE nanocrystals, and LaF3 is dynamically more unstable compared to LaOF, affecting their emission behaviors.

ACS APPLIED NANO MATERIALS (2021)

Article Nanoscience & Nanotechnology

Highly Versatile Upconverting Oxyfluoride-Based Nanophosphor Films

Thi Tuyen Ngo et al.

Summary: Fluoride-based compounds doped with rare-earth cations are utilized to fabricate bright upconverting films that emit different colors and can be used for a wide range of applications. An analysis of the structural and photophysical properties of the films reveals a tradeoff between the oxidation of the matrix and the efficiency of the upconversion process. This study represents a significant advancement in understanding the fundamental properties of upconverting materials and can be applied for the optimization of upconversion systems.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Inorganic & Nuclear

Improving the temperature-dependent sensitivity of Ca9Y(PO4)7:Ce3+,Mn2+ and g-C3N4 composite phosphors by mechanical mixing

Yuming Gong et al.

Summary: The study focused on developing composite phosphors of CYPO:Ce3+,Mn2+/g-C3N4 with different proportions for highly sensitive optical-temperature measurement. Through X-ray powder diffraction and fluorescence spectroscopy, it was found that the composite phosphors exhibited better temperature-dependent properties compared to pure CYPO:Ce3+,Mn2+. The maximum absolute and relative sensitivities of the designed composite phosphors were determined based on FIR technology, providing a feasible idea for versatile applications in optical-temperature measurement.

INORGANIC CHEMISTRY FRONTIERS (2021)

Review Chemistry, Multidisciplinary

Lanthanide doped luminescence nanothermometers in the biological windows: strategies and applications

Albenc Nexha et al.

Summary: The development of lanthanide-doped non-contact luminescent nanothermometers has led to their use as accurate, efficient and fast diagnostic tools, replacing conventional contact thermal probes, due to their versatility, stability and narrow emission band profiles. These nanothermometers utilize lanthanide-doped materials as temperature nanosensors, excited by UV, visible or NIR light, emitting in the I-BW, II-BW, III-BW and IV-BW regions, showing advantages such as reduced phototoxicity and photobleaching, improved image contrast and deeper tissue penetration. Factors affecting the thermal sensitivity and temperature resolution of lanthanide ion-doped nanomaterials in biomedical applications are summarized, along with strategies to boost their sensing properties in each biological window.

NANOSCALE (2021)

Review Chemistry, Inorganic & Nuclear

Lanthanide spectroscopy in probing structure-property correlation in multi-site photoluminescent phosphors

Santosh K. Gupta et al.

COORDINATION CHEMISTRY REVIEWS (2020)

Article Spectroscopy

Optical thermometry based on the non-thermally coupled levels of Tm (III) in LiNbO3 crystals

Lili Xing et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2019)

Article Physics, Condensed Matter

Energy transfer from Pr3+ to Gd3+ ions in BaB8O13 phosphor for phototherapy lamps

Sumedha Tamboli et al.

PHYSICA B-CONDENSED MATTER (2018)

Article Materials Science, Multidisciplinary

Widening the Temperature Range of Luminescent Thermometers through the Intra- and Interconfigurational Transitions of Pr3+

Carlos D. S. Brites et al.

ADVANCED OPTICAL MATERIALS (2018)

Article Materials Science, Multidisciplinary

Broadening the valid temperature range of optical thermometry through dual-mode design

Yan Gao et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Spectroscopy

Influence of Li+ charge compensator ion on the energy transfer from Pr3+ to Gd3+ ions in Ca9Mg(PO4)6F2:Gd3+, Pr3+, Li+ phosphor

Sumedha Tamboli et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2017)

Article Materials Science, Multidisciplinary

Development of a potential optical thermometric material through photoluminescence of Pr3+ in La2MgTiO6

Rui Shi et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Review Chemistry, Inorganic & Nuclear

Interpretation of europium(III) spectra

Koen Binnemans

COORDINATION CHEMISTRY REVIEWS (2015)

Article Materials Science, Multidisciplinary

A strategy for enhancing the sensitivity of optical thermometers in beta-NaLuF4:Yb3+/Er3+ nanocrystals

Kezhi Zheng et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Article Physics, Applied

Broadband infrared emission of Pr3+-doped BaGd2(MoO4)4 for optical amplifier

Ying Guan et al.

JOURNAL OF APPLIED PHYSICS (2014)

Article Chemistry, Multidisciplinary

Pr3+-Doped β-NaYF4 for Temperature Sensing with Fluorescence Intensity Ratio Technique

Shaoshuai Zhou et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)