4.7 Article

From physics to chemistry of fresh blended cements

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Do superplasticizers work the way we think? New insights from their effect on the percolation threshold of limestone pastes

Shengnan Sha et al.

Summary: Superplasticizers are polymeric dispersants that have a significant impact on concrete technology. Despite extensive research, questions remain about how their molecular structures affect their ability to reduce yield stress of particle suspensions. This study revisits the Yodel (YD) and modified shifting factor (MSF) models, which consider both interparticle forces and percolation thresholds, and concludes that superplasticizers modify the percolation threshold in direct relation to their adsorption.

CEMENT AND CONCRETE RESEARCH (2023)

Article Construction & Building Technology

Experimental method and thermodynamic model for competitive adsorption between polycarboxylate comb copolymers

Stefanie Anne Weckwerth et al.

Summary: This study introduces a method to demonstrate competitive adsorption between polycarboxylate ether (PCE) molecules of different molecular structures. By analyzing a fundamental thermodynamic model, the research reveals the impact of dispersity in charge and backbone length on the adsorption behavior of PCEs, contributing to a deeper understanding of the molecular-level working mechanism of PCEs.

CEMENT AND CONCRETE RESEARCH (2022)

Article Chemistry, Physical

Influence of Accelerating Admixtures on the Reactivity of Synthetic Aluminosilicate Glasses

Laura Gonzalez-Panicello et al.

Summary: This study investigates the impact of accelerating admixtures on the reactivity of supplementary cementitious materials using synthetic glasses. The results suggest that the composition of the synthetic glass and the pH of the NaOH solution play a key role in the effect of the admixtures.

MATERIALS (2022)

Article Construction & Building Technology

A new mix design method for low-environmental-impact blended cementitious materials: Optimization of the physical characteristics of powders for better rheological and mechanical properties

Oumayma Ahmadah et al.

Summary: The use of blended cements to tackle environmental challenges in the concrete industry has gained significant interest. This study proposes and validates a new mix design methodology that focuses on the physical optimization of supplementary cementitious materials (SCMs) to improve the rheology of suspensions. Experimental results show that ternary binders with optimized physical characteristics can enhance the compressive strength of mortar and reduce the clinker content.

CEMENT & CONCRETE COMPOSITES (2022)

Article Construction & Building Technology

Microstructural developments of limestone calcined clay cement (LC3) pastes after long-term (3 years) hydration

Franco Zunino et al.

Summary: This paper conducts a detailed study on the hydration process, phase assemblage, porosity evolution, and microstructural development of LC3 samples, providing new insights into its long-term performance.

CEMENT AND CONCRETE RESEARCH (2022)

Review Construction & Building Technology

Interaction between polycarboxylate superplasticizers and non-calcined clays and calcined clays: A review

Lei Lei et al.

Summary: This paper provides a critical overview of current polycarboxylate (PCE) technology, including the chemistry of different PCEs, their interaction with cement, and application aspects. It also discusses the classification and chemistry of clays and clay minerals, as well as the harmful chemical sorption of PCE by montmorillonite (MMT) clay. Possible mitigation strategies and future concepts in PCE technology are presented.

CEMENT AND CONCRETE RESEARCH (2022)

Article Construction & Building Technology

40 years of PCE superplasticizers-History, current state-of-the-art and an outlook

Lei Lei et al.

Summary: This article reviews the invention and development of polycarboxylate superplasticizers (PCEs), and discusses their significance and applications in modern concrete technology. The article also mentions the challenges faced by PCE technology and the future direction of development.

CEMENT AND CONCRETE RESEARCH (2022)

Article Construction & Building Technology

Insights on the role of alumina content and the filler effect on the sulfate requirement of PC and blended cements

Franco Zunino et al.

Summary: Understanding the mechanism controlling the sulfate requirement of blended cements is crucial for a sustainable industry. The role of alumina content in controlling the sulfate demand is essential, with sulfate mainly adsorbed on surfaces influencing the demand.

CEMENT AND CONCRETE RESEARCH (2022)

Article Construction & Building Technology

A method for the mix design of low carbon concrete towards industrial production

Federica Boscaro et al.

Summary: This study introduces a method for facilitating the introduction of newly developed blended cements into the market, and highlights the advantages of formulating mix proportions using pastes and/or mortars. The study also presents best practices for achieving a good correlation between concrete prepared in the laboratory and in a plant, and expands the dataset for designing concrete with low clinker contents.

MATERIALS AND STRUCTURES (2022)

Article Geochemistry & Geophysics

The Challenge of Grinding Ternary Blends Containing Calcined Clays and Limestone

Juan Francisco Garces-Vargas et al.

Summary: This paper discusses the impact of high specific surface materials on cementitious systems and the importance of the grinding regime in influencing the properties of cementitious systems. The experimental program is divided into several stages to study the effects of different formulations on cement performance.

MINERALS (2022)

Article Construction & Building Technology

Robustness of cement-based materials: From dosage variations to yield stress fluctuations

Wenqiang Zuo et al.

Summary: This study evaluates the robustness of fresh cement-based materials from a generic and analytical perspective, comparing experimental yield stress measurements with analytical models from literature. The research highlights the benefits of slightly higher water content, slightly lower aggregates fraction, and viscosity modifying agents/plasticizers combination in fluid concretes.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Formulation of low clinker blended cements and concrete with enhanced fresh and hardened properties

Federica Boscaro et al.

Summary: This paper presents a new approach to formulate low clinker cements and concrete using moderate alkali activation or gypsum to enhance compressive strength without inducing excessive ASR expansion. By optimizing the combination of PCE superplasticizers with strength enhancers and the use of Ca(NO3)2 for PCE adsorption, good rheology control, increased early and long-term compressive strength, and acceptable ASR expansion in cements with only 50% clinker can be achieved.

CEMENT AND CONCRETE RESEARCH (2021)

Review Construction & Building Technology

Limestone calcined clay cement and concrete: A state-of-the-art review

Meenakshi Sharma et al.

Summary: This article reviews the latest literature on limestone calcined clay cement (LC3), discussing its background, chemistry, production, influence of raw materials and production conditions, mixture design, mechanical and durability properties, as well as economic and environmental aspects. Suggestions for further research are also provided at the end of the paper.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Effectiveness of PCE superplasticizers in calcined clay blended cements

Ran Li et al.

Summary: This study found that using calcined clay in composite cements significantly increases water demand, while PCE superplasticizers have a significant impact on flow properties. The research suggests that commercially available PCE products can effectively improve the flow performance of OPC/CC blended cements.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Mechanisms dominating thixotropy in limestone calcined clay cement (LC3)

Pengkun Hou et al.

Summary: Limestone calcined clay cement (LC3) displays unique thixotropic properties, primarily influenced by the negative surface charge and flocculation phenomenon, which affects its fluidity and development trend.

CEMENT AND CONCRETE RESEARCH (2021)

Article Chemistry, Physical

Interaction of individual meta clays with polycarboxylate (PCE) superplasticizers in cement investigated via dispersion, zeta potential and sorption measurements

Marlene Schmid et al.

Summary: Polycarboxylate (PCE) comb polymers were investigated as dispersants for suspensions of individual calcined clay samples. Results showed that the methallyl ether (HPEG) based PCE outperformed the methacrylate ester (MPEG) based PCE, but meta illite could not be satisfactorily dispersed.

APPLIED CLAY SCIENCE (2021)

Article Construction & Building Technology

A first-order physical model for the prediction of shear-induced particle migration and lubricating layer formation during concrete pumping

Shirin Fataei et al.

Summary: By analyzing the equations driving shear-induced particle migration in dense suspensions, a first-order physical correlation between pumping parameters, granular skeleton properties, and LL properties is proposed for the first time. The model is shown to qualitatively capture the observed main features and their evolutions in different types of concrete materials.

CEMENT AND CONCRETE RESEARCH (2021)

Article Green & Sustainable Science & Technology

Approaches to achieve fluidity retention in low-carbon calcined clay blended cements

Ran Li et al.

Summary: High meta kaolin content in calcined clay blended cement is beneficial for early strength development but hinders the dispersing effectiveness of PCE superplasticizers and makes slump retention difficult. By introducing a new admixture formulation, a significant improvement in fluidity retention can be achieved in such composite cements. This is done through a synergistic effect of a high water-reducing type HPEG PCE and a PCE-LDH nanocomposite.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Polymer Science

A Method for Characterizing the Chemical Heterogeneity of Comb-Copolymers and Its Dependence on Synthesis Routes

Stefanie Anne Weckwerth et al.

Summary: The study introduces a method to characterize the chemical heterogeneity of polymers, demonstrating its application in different synthesis routes. The impact of synthesis pathway on chemical heterogeneity is shown using comb-copolymer dispersants as a case study.

POLYMERS (2021)

Article Construction & Building Technology

Study of nucleation and growth processes of ettringite in diluted conditions

Estelle Poupelloz et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Materials Science, Ceramics

Shifting factor-A new paradigm for studying the rheology of cementitious suspensions

Sara Mantellato et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Article Construction & Building Technology

Factors influencing the sulfate balance in pure phase C3S/C3A systems

Franco Zunino et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

A study on fresh properties of limestone calcined clay blended cementitious systems

Nithya Nair et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Dispersing performance of different kinds of polycarboxylate (PCE) superplasticizers in cement blended with a calcined clay

Marlene Schmid et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Supplementary cementitious materials: New sources, characterization, and performance insights

Maria C. G. Juenger et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

Reactivity of supplementary cementitious materials (SCMs) in cement blends

Jurgen Skibsted et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

Recent advance of chemical admixtures in concrete

J. Liu et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

First steps to the molecular structure optimization of polycarboxylate ether superplasticizers: Mastering fluidity and retardation

Delphine Marchon et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

The influence of the filler effect on the sulfate requirement of blended cements

Franco Zunino et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

Relating early hydration, specific surface and flow loss of cement pastes

Sara Mantellato et al.

MATERIALS AND STRUCTURES (2019)

Article Green & Sustainable Science & Technology

Impacting factors and properties of limestone calcined clay cements (LC3)

Karen Scrivener et al.

GREEN MATERIALS (2019)

Article Construction & Building Technology

Rheological requirements for printable concretes

Nicolas Roussel

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry

Karen L. Scrivener et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Calcined clay limestone cements (LC3)

Karen Scrivener et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Influence of aluminates on the hydration kinetics of tricalcium silicate

Elizaveta Pustovgar et al.

CEMENT AND CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Effect of particle morphological parameters on sand grains packing properties and rheology of model mortars

H. Hafid et al.

CEMENT AND CONCRETE RESEARCH (2016)

Article Construction & Building Technology

Organic admixtures and cement particles: Competitive adsorption and its macroscopic rheological consequences

Hela Bessaies-Bey et al.

CEMENT AND CONCRETE RESEARCH (2016)

Article Construction & Building Technology

Effects of superplasticizers on the stability and morphology of ettringite

Chen Shi et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Tailoring the anionic function and the side chains of comb-like superplasticizers to improve their adsorption

Florent Dalas et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Construction & Building Technology

Use of micro-reactors to obtain new insights into the factors influencing tricalcium silicate dissolution

Prannoy Suraneni et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Construction & Building Technology

Chemical admixtures - Chemistry, applications and their impact on concrete microstructure and durability

J. Plank et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Construction & Building Technology

Morpho-topological the mechanisms and kinetic regimes of alite dissolution

P. Juilland et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Construction & Building Technology

Adsorption of PCE and PNS superplasticisers on cubic and orthorhombic C3A. Effect of sulfate

M. M. Alonso et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Materials Science, Ceramics

In-Situ XRD Measurement and Quantitative Analysis of Hydrating Cement: Implications for Sulfate Incorporation in C-S-H

Luca Valentini et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Article Construction & Building Technology

Influence of limestone and anhydrite on the hydration of Portland cements

Maciej Zajac et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

Consequences of competitive adsorption between polymers on the rheological behaviour of cement pastes

Hela Bessaies Bey et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

Adsorbing polymers and viscosity of cement pastes

Julie Hot et al.

CEMENT AND CONCRETE RESEARCH (2014)

Article Construction & Building Technology

Formation of organo-mineral phases at early addition of superplasticizers: The role of alkali sulfates and C3A content

A. Habbaba et al.

CEMENT AND CONCRETE RESEARCH (2014)

Article Materials Science, Ceramics

Understanding the Filler Effect on the Nucleation and Growth of C-S-H

E. Berodier et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Article Multidisciplinary Sciences

Attractive particle interaction forces and packing density of fine glass powders

Eric J. R. Parteli et al.

SCIENTIFIC REPORTS (2014)

Article Construction & Building Technology

Compatibility between polycarboxylate-based admixtures and blended-cement pastes

M. M. Alonso et al.

CEMENT & CONCRETE COMPOSITES (2013)

Article Construction & Building Technology

Yield stress and bleeding of fresh cement pastes

A. Perrot et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Construction & Building Technology

Effect of the repartition of the PEG side chains on the adsorption and dispersion behaviors of PCP in presence of sulfate

Sylvie Pourchet et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Construction & Building Technology

The origins of thixotropy of fresh cement pastes

N. Roussel et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Construction & Building Technology

Compatibility between superplasticizer admixtures and cements with mineral additions

Olga Burgos-Montes et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Materials Science, Ceramics

Concrete: An eco material that needs to be improved

Robert J. Flatt et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Article Construction & Building Technology

Flow Simulation of Fresh Concrete under a Slipform Machine

François de Larrard et al.

Road Materials and Pavement Design (2012)

Article Construction & Building Technology

A remastered external standard method applied to the quantification of early OPC hydration

Daniel Jansen et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Construction & Building Technology

Impact of admixtures on the hydration kinetics of Portland cement

J. Cheung et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Construction & Building Technology

Mechanisms of cement hydration

Jeffrey W. Bullard et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Construction & Building Technology

Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash

K. De Weerdt et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Multidisciplinary Sciences

Origins of saccharide-dependent hydration at aluminate, silicate, and aluminosilicate surfaces

Benjamin J. Smith et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2011)

Article Construction & Building Technology

Dissolution theory applied to the induction period in alite hydration

Patrick Juilland et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Construction & Building Technology

Rheology of fiber reinforced cementitious materials: classification and prediction

Laetitia Martinie et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Construction & Building Technology

Steady state flow of cement suspensions: A micromechanical state of the art

Nicolas Roussel et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Materials Science, Ceramics

Effects of Saccharide Set Retarders on the Hydration of Ordinary Portland Cement and Pure Tricalcium Silicate

Linghong Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

Article Construction & Building Technology

Early C3A hydration in the presence of different kinds of calcium sulfate

S. Pourchet et al.

CEMENT AND CONCRETE RESEARCH (2009)

Review Materials Science, Ceramics

Surface and Intercalation Chemistry of Polycarboxylate Copolymers in Cementitious Systems

Claire Giraudeau et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

Article Materials Science, Characterization & Testing

Quantitative in situ X-ray diffraction analysis of early hydration of Portland cement at defined temperatures

C. Hesse et al.

POWDER DIFFRACTION (2009)

Article Construction & Building Technology

Competitive adsorption between superplasticizer and retarder molecules on mineral binder surface

J. Plank et al.

CEMENT AND CONCRETE RESEARCH (2008)

Article Construction & Building Technology

Influence of limestone on the hydration of Portland cements

Barbara Lothenbach et al.

CEMENT AND CONCRETE RESEARCH (2008)

Article Construction & Building Technology

Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement

Barbara Lothenbach et al.

CEMENT AND CONCRETE RESEARCH (2008)

Article Construction & Building Technology

Rheology of fresh concrete: from measurements to predictions of casting processes

Nicolas Roussel

MATERIALS AND STRUCTURES (2007)

Article Materials Science, Ceramics

A new approach to modeling the nucleation and growth kinetics of tricalcium silicate hydration

Jeffrey J. Thomas

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)

Article Construction & Building Technology

Mechanisms and parameters controlling the tricalcium aluminate reactivity in the presence of gypsum

Hne Minard et al.

CEMENT AND CONCRETE RESEARCH (2007)

Review Construction & Building Technology

Thermodynamic properties of Portland cement hydrates in the system CaO-Al2O3-SiO2-CaSO4-CaCO3-H2O

Thomas Matschei et al.

CEMENT AND CONCRETE RESEARCH (2007)

Article Materials Science, Ceramics

Yield stress of multimodal powder suspensions: An extension of the YODEL (Yield stress mODEL)

Robert J. Flatt et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)

Article Construction & Building Technology

Computational modeling of concrete flow: General overview

Nicolas Roussel et al.

CEMENT AND CONCRETE RESEARCH (2007)

Article Construction & Building Technology

A thixotropy model for fresh fluid concretes: Theory, validation and applications

Nicolas Roussel

CEMENT AND CONCRETE RESEARCH (2006)

Article Construction & Building Technology

Relating the molecular structure of comb-type superplasticizers to the compression rheology of MgO suspensions

Ane M. Kjeldsen et al.

CEMENT AND CONCRETE RESEARCH (2006)

Article Materials Science, Ceramics

Yodel: A yield stress model for suspensions

RJ Flatt et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Article Construction & Building Technology

The effects of chemical environment on the nucleation, growth, and stability of ettringite [Ca3Al(OH)6]2(SO4)3•26H2O

AM Cody et al.

CEMENT AND CONCRETE RESEARCH (2004)

Article Materials Science, Multidisciplinary

Tricalcium aluminate hydration:: Microstructural observations by in-situ electron microscopy

P Meredith et al.

JOURNAL OF MATERIALS SCIENCE (2004)

Article Construction & Building Technology

A simplified view on chemical effects perturbing the action of superplasticizers

RJ Flatt et al.

CEMENT AND CONCRETE RESEARCH (2001)